Photo: I removed the LSI card from the other server and installed it into the server which had a UEFI shell.  This output is from before the flash upgrade.
Photo: The first step is to remove the old firmware.  DO NOT REBOOT after doing this.  You must upgrade the flash before rebooting.  Failure will mean a bricked card.
Photo: I had issued this command: sas2flash.efi -o -f 2118it.bin -b mptsas2.rom
Photo: That seems successful.
Photo: And yes it was.  Note the IT in the firmware Product ID.
Loading...
Dan Langille
Public
I had issued this command: sas2flash.efi -o -f 2118it.bin -b mptsas2.rom
no plus ones