"Serving The Universe Of Modelers"
See all
Members (215)
Kenny Conklin's profile photo
Jason Marshall's profile photo
Simon Mercs's profile photo
Painted Miniatures's profile photo
Wally “Starfleet Model” Pasternak's profile photo
Steve Lail's profile photo
Mark “MD Modelworks” Dunmore's profile photo
Israel Isla Romero's profile photo
Klaus Pagano's profile photo
Wappynutter Andy's profile photo
Scale Model Kit Review's profile photo
Justin Gibb's profile photo
Aaron (Ender)'s profile photo
julie ludmann's profile photo
Bruce Lyon's profile photo
Pollock Nakia's profile photo
Eddy Stecher's profile photo
Alex McElhinney's profile photo
Bill Schiebler's profile photo
NATHAN BENNER's profile photo
Stephen Sutton (ScaleModelKitReview)'s profile photo
Steve P (SHADO80)'s profile photo
Scott Espin's profile photo
Eric Hawkins Bash Kid's profile photo

Stream

Join this community to post or comment
 
Panel work on the Batwing and touch up work on Batman Thanks for Watching.
1
Add a comment...

chuck brooks

Discussion  - 
1
Add a comment...

Buck Moore

Discussion  - 
 
Here is my project while I'm waiting on stuff to come In for the Enterprise -C. Still have some light blocking to do. I added flicking white LED's to help simulate engine thrust. Tried to load video but it's not working will try again later.
2
Kenny Conklin's profile photoBuck Moore's profile photo
2 comments
 
+Kenny Conklin Thank you, if you follow my BTM Scale Models on Facebook you can see the video I couldn't get to load.
Add a comment...

chuck brooks

Discussion  - 
 
congrats to all the winners of MOTY 2017, fine job sirs!
3
Add a comment...
 
More work on the Batwing and the base thanks for watching.
5
Add a comment...
 
Leaving 2016 behind and onto an awesome 2017.....Happy New Year fellow modelers.
4
Add a comment...

Kenny Conklin
owner

Discussion  - 
 
Our final video of 2016! Come check it out!! https://www.youtube.com/watch?v=L3kElTaJC7w
3
Add a comment...

Kenny Conklin
owner

Discussion  - 
 
MOTY 2017 Entry BTL-S3 Attack Fighter/Bomber by Jim Lewis​ for more on this build follow the link. http://scifiantasy.com/2016/12/31/moty-2017-entry-btl-s3-attack-fighterbomber/
MOTY 2017 Entry BTL-S3 Attack Fighter/Bomber BTL-S3 Y-Wing Attack Fighter/Bomber - Grey Leader (ROTJ) This is the 1:72 scale Fine Molds kit, scratch/converted to the two-seater S3 version, I built it when the kit came out in 2007. I used one Studio Starforge figure to go with the kit figure. Gre
4
Add a comment...

Kenny Conklin
owner

Discussion  - 
 
MOTY 2017 Entry Jason & The Argonauts by +Boyd Crompton​ for more on this build please follow the link. http://scifiantasy.com/2016/12/31/moty-2017-entry-jason-the-argonauts/
MOTY 2017 Entry Jason & The Argonauts “The Final Battle” This resin and potted metal kit is from Monsters In Motion and it is called “The Final Battle” The model depicts the famous scene from the film “Jason And The Argonauts” in which the hero Jason engages in a deadly sword fight with
4
Add a comment...

Kenny Conklin
owner

Discussion  - 
 
MOTY 2017 Entry Alien Xenomorph by Armando de la Cabada for more on this build follow the link. http://scifiantasy.com/2016/12/30/moty-2017-entry-alien-xenomorph/
MOTY 2017 Entry Alien Xenomorph Here is a 1:4 scale crouching Alien xenomorph. This is a very large resin kit inspired by the original movie and created by a garage kit producer. It measures 15 inches in height and 19 inches in arm span. It was painted using mostly Alclad metallics and high g
1
Add a comment...

Buck Moore

Discussion  - 
 
Primary paint and shadow work done.
1
Add a comment...

Kenny Conklin
owner

Discussion  - 
 
Imperial Star Destroyer by Mark Dunmore for more on this article please follow the link http://scifiantasy.com/2017/01/12/imperial-star-destroyer/
Imperial Star Destroyer Revell Snap tight Rogue One Imperial Star Destroyer From Revell, we have the Imperial Star Destroyer. This kit is a snap-fit kit aimed and a younger audience. The kit includes light and sound and is ready to be snapped together out of the box, no cutting parts off th
5
Add a comment...

Buck Moore

Discussion  - 
 
Need some advice. This is the pylon section for the Enterprise D 1/1400. Modeled in clear(lol) for easy lighting hah. Any tips on how to best run the wire for lighting the nacelles and navigation lights? As you can see it’s all one peice.
1
alan darlington's profile photoBuck Moore's profile photo
2 comments
 
+alan darlington thank you
Add a comment...

Kenny Conklin
owner

Discussion  - 
 
Congratulations to this years MOTY 2017 winners. In 3rd place Andrew Prentis with The Mole. In 2nd place Mark Myers with Original Starship Enterprise and in 1st place and MOTY 2017 +Mark Dunmore with his RX-0 Gundam Unicorn!! Congrats to all who won and entered!! http://scifiantasy.com/2017/01/08/moty-2017-winners/ 
MOTY 2017 Winners We would like to congratulate everyone who had entered our online contest this year. You all had great builds and it is always a difficult task to choose a winner. The results are in and these are this years winners. 3rd Place - Andrew Prentis - The Mole 2nd Place - Mark Mye
5
Liam Dillon's profile photo
 
Congrats to Mark and all the other winners!
Add a comment...

Kenny Conklin
owner

Discussion  - 
 
Shield by Rex Stow for more on this build please follow the link. http://scifiantasy.com/2017/01/01/shield/
Shield The figure is by Nuts Planet it is resin kit that is 1:24 scale and called Shield. The kit came with one-half of the mini diorama and the other half came from another Nuts Planet figure called Devastator Victor who's diorama was made to match the other kit so that's what I did.the figure was
4
Add a comment...

Kenny Conklin
owner

Discussion  - 
 
Voting is now open come and help choose this year's Community Choice Recipient!! Register at scifiantasy.com/activity and then go to the vote table and pick your top three choices just follow this link if you are already registered! http://scifiantasy.com/2016/02/22/model-year-2015-voting/
Welcome to the 2nd Annual SciFiantasy Model Of The Year Contest! The staff at SciFiantasy would like to thank all of the contestants for entering their builds! To see all of the builds and more photos and information on each of the builds follow the link here. The Top 3 models will be select
1
1
Add a comment...

Buck Moore

Discussion  - 
 
Work is continuing on the nacelles for the Enterprise-C. Should have all the painting done by the end of the week on them, then on to the hull and saucer.

1
Kenny Conklin's profile photoBuck Moore's profile photo
2 comments
 
+Kenny Conklin thank you.
Add a comment...

Kenny Conklin
owner

Discussion  - 
 
MOTY 2017 Entry Talos Attacks by +Boyd Crompton​ for more on this build please follow the link. http://scifiantasy.com/2016/12/31/moty-2017-entry-talos-attacks/
MOTY 2017 Entry Talos Attacks This is a resin figure kit from Monsters In Motion and it is called “Talos Attacks” It depicts the scene from the film “Jason And The Argonauts in which the giant bronze statue of Talos comes to life to destroy Jason and his crew aboard their ship, the Argo. The f
3
Add a comment...

Kenny Conklin
owner

Discussion  - 
 
MOTY 2017 Entry Frankenstein by Armando de la Cabada. For more on this build follow the link. http://scifiantasy.com/2016/12/30/moty-2017-entry-frankenstein/
MOTY 2017 Entry Frankenstein This is Frankenstein chained. He is about 1:5 scale I believe. Also, a resin kit produced by a garage kit producer. Assembled and then painted with custom mixed urethane acrylics. The brick coloring was achieved with dry brushing of black and dark earth Secret Weapon pi
2
Add a comment...

Kenny Conklin
owner

Discussion  - 
 
MOTY 2017 Entry NX-01 by Armando de la Cabada for more on this build follow the link. http://scifiantasy.com/2016/12/30/moty-2017-entry-nx-01/
MOTY 2017 Entry NX-01 Here is the Polar Lights 1:350 scale NX-01, built between Aug and Dec 2013. The color was custom mixed, and Aztec Dummy masks were used to paint the Aztec pattern in after taking some of the base paint and darkening it. Boards from I used boards from Tenacontrols and Voodoo
2
Add a comment...