Post has attachment
Please review all 3 vignettes and give me your comments. much appreciated
PhotoPhotoPhotoPhoto
10/22/17
4 Photos - View album

Post has attachment
This is my attempt at all the vignettes before my BDCS retake. Please let me know if you see any issues! Thank you!
+Nick NCARB +Michelle NCARB +Ryan NCARB +Terry NALSA
PhotoPhotoPhotoPhoto
10/21/17
4 Photos - View album

Post has attachment
Please help

how the 29 get from the chart? can someone break it down the steps for solving this problem ? Many thanks
Photo

Post has attachment
My first attempt on the roof vignette. A few questions:

+ Anything that I missing?
+ Is a cricket required on exhibition room, if the roof ridge is perpendicular to the chimney?
+ What is the recommended spacing between downspouts on a continuous length of the gutter?
+ Will I be penalized if I round up roof heights by 6" to even foot heights?

Comments are welcome, thanks
Photo

Post has attachment
roof 3.1. any comments? thanks for looking!!
Photo

Post has attachment
My first attempt on the stair design vignette.
+ Is my landing @ 12'-3" too shallow (5' x 8') ?
+ Not sure why the passing solution was so deep.
Thanks.
Photo
Photo
10/19/17
2 Photos - View album

Post has attachment
Hi please checkout my first attempt at the Ramp vignetter. Comments appreciated!

Question: The railing extension and the railing on stair/ ramp flights need to be drawn in one straight shot? Meaning, can't click stop at end of ramp and click in same spot to start the extension? It's just easier to measure the 12" that way...
Photo

Post has attachment
1st attempt at the stair vignette. Stairs at 56" wide. Comments appreciated!

Question: handrails can stick into the door clearance right? This is at ground level mezzanine landing.
Photo
Photo
10/18/17
2 Photos - View album

Post has attachment
First attempt at ramp vignette. I noticed some solutions turn the railing 90deg at the bottom of the stair to keep 5' clear at the bottom. Anything else that I may have missed? Comments are welcome! Thanks in advance
Photo

Post has attachment
+Nick NCARB +Ryan NCARB +Michelle NCARB

2nd Attempt at the BDCS exam tomorrow. Any comments would be appreciated.

Also, a couple of questions:
1. At the east side of my plan where the two roofs are at different heights, is it correct that i need to draw two SEPARATE gutters; one for each roof with their own separate downspouts?
2. for the vent stacks - is it correct to assume that i only need one per plumbing wall?

Thanks!!
Photo
Wait while more posts are being loaded