Post has attachment
bosnianbill can't be pick XPUZMAG
bosnianbill (634) video is cheating
lock face was scratched.
Before Recording has been severely damaged the structure of the lock
bosnianbill Hide (634)XPUZMAG 2 PO text:
(2)2015-3-12
Dear bosnianbill
I'm the inventor of XPUZMAG. I've asked you about the retest result at 5 March because you failed to pick XPUZMAG at the beginning of January. But you didn't reply until now and still spread the unfair XPUZMAG video. This make many people misunderstand XPUZMAG. I'm here to disclose the evidences of your cheats and any righteous person can judge it.
1. In the video 12:18, the screws are already loose while your screwdriver touching it and not screwing yet. Then you turn the screws so easy. This reveals that these screws doesn't tight. But the original screws from factory should be very tight. It should take strength to turn them and will have a sound:"Paa" once the screw be opened.
2. In the video 12:47, after the four screws loose, there are spaces of components. The original lock from factory should be fit even if the screws loose. This reveals that the inside components is loose in this unscrewed lock. It is not possible to have the function that it should have because it is an incomplete lock. Any test to it is improper.
By this method, you can pick every locks in the world. Are you sincerely convinced if I pick your lock by this? How much video is made by this method in your 650 videos?
You said XPUZMAG is easy to pick, But I said you are dishonest. Then you have a suggestion about making another fair retest. You deleted the 10 mins video that fail to pick XPUZMAG in January and said you are going to made another one. Until now, You still not make the retest yet. I can say that you already try hundreds of thousands of times and still fail to pick it. Are you going to prolong the testing time limitless until one day you successfully pick it? Won't you worry about you will be doubt the fairness again? You get much praise and glory from this dishonest video and it must be hard to admit the mistake.
Today I'm here to declare to everyone, this is not a limitless test and you already exceed the reasonable deadline. You can't made another fair video so the test result should be as the video in January. Bill, you are fail! Based on the reasons below:
1. You have destroy XPUZMAG many times and should be very familiar with it.
2. You promise to make a fairest test from open the package.
3. You are totally prepared.
4. You are free and without disturbance.
Based on all of the advantages, the deleted video in January should be the fairest test. Today, the test is over. Anyone who wants to know the truth should ask Bill to disclose the video.

I believe XPUZMAG can't be pick without any destroy.
Best Regards
Inventor of XPUZMAG
-------------------------------------------------------------------------------------------------------------
EVER DIGNITY INDUSTRY CO., LTD. ( XPUZMAG-3D deadbolt door Lock)
China PAT:1094992 ZL 2009 1 0158574.0
TAIWAN PAT:I 372199
Address:No.488, Xinsheng Rd., Guanyin Dist., Taoyuan City 32848, Taiwan (R.O.C.)
TEL:886-3-2824215 FAX:886-3-4982223
E-mail:onsun98@gmail.com
:onsun98@yahoo.com.tw
Buy online:http://www.idealez.com/onsun98/product-detail/en_US/119272
http://www.onsun98.com.tw/
http://www.taiwantrade.com.tw/EP/onsun98/
Photo

Post has attachment
Smart Lock, Diy,Smart door Lock,diy ideas, 3D deadbolt Lock,KO Bump Key- XPUZMAG
bosnianbill can't be pick XPUZMAG
XPUZMAG Wholesale

EVER DIGNITY INDUSTRY CO., LTD. ( XPUZMAG-3D deadbolt door Lock)
China PAT:1094992 ZL 2009 1 0158574.0
TAIWAN PAT:I 372199
Address:No.488, Xinsheng Rd., Guanyin Dist., Taoyuan City 32848, Taiwan (R.O.C.)
TEL:886-3-2824215 FAX:886-3-4982223
E-mail:onsun98@gmail.com
:onsun98@yahoo.com.tw
http://www.idealez.com/onsun98/product-detail/en_US/119272
http://www.onsun98.com.tw/
http://www.taiwantrade.com.tw/EP/onsun98/
PhotoPhotoPhoto
2016-08-23
3 Photos - View album
Wait while more posts are being loaded