Post has attachment
When peek filament could be not use.
First printing test on Raspberry Case, successfully printed on Zortrax M200, tests will go on, if positive we will reveal the name and commercialize it

Post has attachment
I tried to print a model on colorFabb PLA Warm Red filament (recommended temperature 190-210 C) using Zortrax M200. I use colorFabb PLA filaments with no issues on my RepRap style printer, but getting job done on Zortrax seems simply not possible.

Hot-end temperature 190 - no extrusion at all, raising temperature to 210 allowed to partially print raft, but after that extrusion stopped and only knocking noise from the extruder could be heard. Further temperature increase to 220 and 230 did not change anything.

Z-suite allows 3rd party materials use in the software settings, but I do not see results in the real print job.

6 Photos - View album

Post has attachment
Polyropylene 35% Glass Fiber Hight Thermal Resistance Metal Replacement
Technical Data
Tensile strength at break 105 MPa ASTM D638
Flexural Modulus 8600 MPa ASTM D790
Vicat B (50°C/h at 50 N) 139 °C ASTM D1525
HDT Heat Deflection Temperature A (1,82 MPa) 151 °C ASTM D648

Post has attachment
PBT 3D Filament on standard Zortrax M200
Wait while more posts are being loaded