Stream

Join this community to post or comment
Pinned by moderator

김용오
moderator

Android  - 
 
 
ODROID-C1 Updates : Release Note of Android (v1.2)

Picture enhancement on HDMI.
- No blurry or fuzzy
- Same quality with Linux/Ubuntu release
Supporting additional HDMI resolutions.
- Same resolutions as much as Linux/Ubuntu release
- Selectable by Odroid Utility or boot.ini
Support overscan tuning
- Configurable by Odroid Utility
Supporting portrait display
- Only possible 90 degree on CW
Bluetooth USB Dongle Support.
- http://www.hardkernel.com/main/products/prdt_info.php?g_code=G141656580698
- Note: device paring steps should be proceeded slowly. :-D
1Gbps ethernet performance enhancement.
Kodi 14.0 “Helix” preinstalled
- Contains installable .apk and automatically installs on the first boot
- Auto launching on boot, configurable on Odroid Utility
- Since Kodi is not working properly when Superuser is installed, you must simply remove Superuser or install another app like SuperSu.
Source code clean up and minor issues fixed.
SuperUser can be installed if you remove it.
The current version only provide Linux kernel and U-boot source code. Here are the instructions to checkout the source code and build. For more detail information, please visit U-boot and Kernel. U-boot. $ git clone --depth 1 https://github.com/hardkernel/u-boot.git -b odroidc-v2011.03 $ cd ...
5
Add a comment...

김용오
moderator

Discussion  - 
 
 
Single-board computer up and running
Shortly after arriving in the mailbox, we have our pair of  ODROID-C1 's up and running!  This single-board-computer is similar to the Raspberry Pi 2 but better in most respects, yet still about $35.  The fact that the USB ports and GbE port are not shared ...
View original post
5
David Burke's profile photo
 
Got all of my C1's to run Ubuntu 14.10 with the Mate Desktop and Libre Office. One is now going into a business on trial to replace one of their Windows XP Desktops. If all goes well then the rest of the XP machines in that company will get the same treatment. ;)
Add a comment...

김용오
moderator

Discussion  - 
3D Printable Breakout frame which mechanically adopts the ODROID-C1 to MLAB (http://wiki.mlab.cz/) electronic prototyping and development system. The design even provides great increase of mechanical durability of weak ODROID's PCB board. The breakout frame accepts standard M3x12mm screws and nuts which are used normally in MLAB system.
2
Add a comment...

김용오
moderator

Linux  - 
debian-mini-odroid-c1 - Script to build a minimal Debian sd card image.
8
3
David Burke's profile photoTimothy Lorens's profile photoHelio Machado's profile photoDen Zuk's profile photo
Add a comment...

김용오
moderator

Discussion  - 
 
 
Just happened to have these all out so I took a photo.
From left to right...

Odroid W:
An awesome piece of engineering. This is basically a Raspberry Pi Model B complete with all the GPIO on a tiny tiny board with a built in battery circuit so you can run off and also charge LiPos.

Raspberry Pi Model B:
The legendary. I don't really need to say much about this except it had a few issues which were fixed with the Model B+ and more recently the Pi 2 Model B has increased its abilities with a quad core and 1GB of RAM.

Banana Pi:
A board which attempted to copy and improve on the original Raspberry Pi Model B. Whilst it had issues, it did have considerably more processing power, gigabit ethernet and SATA built in.

Odroid XU3 Lite:
One of the fastest single board computers currently available and excellent value at $99 for the bundle which includes the board case and power supply.  The XU3 is extremely fast with an Octocore CPU, 2GB of DDR3 optional eMMC storage (like an SSD) and it even includes USB3. 

Many people have asked me what my favourite single board computers are, its a difficult one to answer. The low cost and vast support for the Raspberry Pi variants make them the computer I've used the most in many many applications but I also have a big fondness for the Odroid W. The compatibility with the Pi, built in LiPo circuits and tiny tiny form factor make it suitable for so many projects. For times when I need raw power, you just can't beat the XU3 though, its a totally different experience to the others.

The other boards I'd like to play with are the offerings by SolidRun,  the HummingBoard and especially the CuBox look fascinating.
9 comments on original post
6
Add a comment...

김용오
moderator

Linux  - 
 
 
Odroid-C1 support NetBSD

#Odroid   #ARM   #NetBSD  
Source-Changes archive. [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]. CVS commit: src/sys/arch. To: source-changes%NetBSD.org@localhost; Subject: CVS commit: src/sys/arch; From: "Jared D. McNeill" ; Date: Sat, ...
View original post
3
Add a comment...

김용오
moderator

Discussion  - 
 
 
Currently running my Odroid-U2 at 542fb076aa8223a094a6e35b5dc22b26f3bc8d79 :  Mali DRM still does not compile, but the device as such works. Video works, too, using fbdev, but it's slow without Mali DRM.

The best thing: this is all FOSS!

  #hardkernel   #odroid   #odroidu2  
View original post
1
Add a comment...

김용오
moderator

Discussion  - 
 
http://t.co/qQiF3YpDHH - Error while running Meteor on an odroid u3 #meteorjs

@MeteorAtSO 님의 트윗을 확인해보세요 : https://twitter.com/MeteorAtSO/status/566898409609895936?s=09
 ·  Translate
“http://t.co/qQiF3YpDHH - Error while running Meteor on an odroid u3 #meteorjs”
1
Lee Justin's profile photo
 
해당 트윗 Link가 없거나 잘못된듯.
 ·  Translate
Add a comment...

김용오
moderator

Discussion  - 
 
 
Updated the old unscientific nginx compile time benchmark  with Odroid-C1 and Intel Celeron based NUC.

The Odroid-C1 compiles faster than I would have thought. I didn't get my hands on a RaspBerry Pi 2 yet, anyone fancy trying? See method and data at https://docs.google.com/spreadsheet/ccc?key=0Au6ABBpYc3P3dEtHVVlZT0ZtTm84aTIyd0RaQVNjYkE .
18 comments on original post
8
1
Joan de Gracia's profile photo
Add a comment...

김용오
moderator

Discussion  - 
 
 
때는 바야흐로 2013년 초... 라즈베리 파이라는 신박한 물건을 접하고 이것저것 쓰기 시작한 이후...라즈베리 성능이 후달린다!!!!그리하여 주섬주섬 뒤지다 보니 발견한 것<아름다운 스펙이다>usb 3.0을 지원한다는 소리에 호옹이? 하고 구매결정. 게다가 무려 옥타코어..(갤6은 엑시노스7420이라는데 ㅂㄷㅂㄷ..)뭐 어쨋든. 거금주고 구매를
View original post
2
Brett Cooper's profile photoDavid Burke's profile photo
2 comments
 
XU3-Lite also very good. :)
Add a comment...

About this community

Place to discuss the ODROID from Hardkernel.com

김용오
moderator

Android  - 
 
We uploaded android source code for ODROID-C1 on github site.

http://odroid.com/dokuwiki/doku.php?id=en:c1_building_android
If you have not built Android on your desktop yet, please read Android's official build environment set up guide https://source.android.com/source/initializing.html carefully before your proceed. Otherwise, you would have unexpected errors and exhaust to read quite long and complcated build log ...
9
Daniel Medeiros's profile photo
 
good news! is there a possibility for you guys to add official CyanogenMod support?
Add a comment...
9
Ard van Breemen's profile photo
 
w00t!
Add a comment...

김용오
moderator

Discussion  - 
 
@evasjuve 님의 트윗을 확인해보세요 : https://twitter.com/evasjuve/status/568368404966576128?s=09
 ·  Translate
“#ARM . Its not only about processing power is it? But still.. #odroid #raspberrypi #beaglebone #peripherals”
7
2
Peter Barrett's profile photoDavid Burke's profile photoJoan de Gracia's profile photoRaspberry para torpes's profile photo
2 comments
 
And an up-to-date kernel with a proper GUI that accepts Theme changes and can display Java programs properly?
Add a comment...

김용오
moderator

News  - 
 
This page introduce you how you can flash S/W release onto your eMMC or MicroSD and can boot without a failure or panic. 8-) So here is the generic process for ODROID boards to install new S/W release. Downloading. Download the S/W release image from a FTP server. The server or URL is shared ...
6
1
Batsirai Tambo's profile photoalain frenois's profile photo
2 comments
 
Does the microsd card need to be class 10 for the boot process to work??. I have a feeling mine is not booting because I'm using class 6. 
Add a comment...

김용오
moderator

Discussion  - 
 
The Immersive Vision Kit
 
Releasing the Immersive Vision Kit, a dedicated device for The vOICe http://techesoterica.com/?page_id=715 #Android #BionicEye  

Description by its blind developer in India, +Pranav Lal: I am releasing the Immersive Vision Kit which is a dedicated device for running The vOICe. If you can build Lego, then you can build yourself an electronic eye. The kit has the following advantages.

   # It is compact and unobtrusive.

   # It is modular allowing you to select the components you want.

   # You do not feel the heat generated by the camera or any other component.

   # It is easier to handle as compared to a Netbook or laptop with video glasses. The equipment can fit into a jacket pocket or purse.

   # You can add other components to the kit.

   # The camera used has a very wide angle allowing you to get the maximum input from your environment.

   # There are no distractions while using the kit. Its only purpose is to run The vOICe and that is what it does.

The kit consists of an ODROID u3 board running Android as well as a camera with a wide angle view. Please see the immersive vision kit page for more information including setup instructions.
A blog dealing with sensory substitution and other esoteric concepts and technologies like speech-recognition and chaos theory
1 comment on original post
3
Valter Fukuoka's profile photo
 
VERY interesting application...
Add a comment...
 
Has anyone here bought one of these 3.2inch touch screens?
Does anyone know if the stylus is required, or will a finger do?

http://odroid.com/dokuwiki/doku.php?id=en:c1_lcdshield
Fully assembled 3.2inch display with 320×240 pixels TFT LCD and a resistive touch overlay. Just plug it on top of ODROID-C1. 2×13 tall female header is already soldered on the PCB. Fast 30Mhz SPI is used for the faster frame rate. You will need an official Ubuntu image to configure it.
10
1
Steve Evans's profile photoRob Martin's profile photoalain frenois's profile photo
7 comments
 
+Steve Evans Thanks!
Add a comment...

김용오
moderator

Discussion  - 
 
 
Trobada ARM a @lapipaplena Dos petits grans gegants: Odroid C1 i Raspberry Pi 2. Dos quads cores que donaran molta guerra. #odroid #raspberrypi2. 
 ·  Translate
1 comment on original post
5
Add a comment...

김용오
moderator

Accessory  - 
 
ODROID-SHOW2
1
Add a comment...