This 3D printing community is for people with printers to reach out and help others with 3D printers. Answer questions for people who want to buy a printer. Share your experience, your tips and tricks. We hope to keep it straight forward, light and to spread our passion for this world-changing technology!
The world of 3D printing is getting bigger and bigger by the minute. You can make any shape or model by using 3D printing which is amazing. This is a wonderful things for the students and young children.
Hello! I am new to this community and need your help. I am a media specialist for four middle schools and have 4 3d printers. They have the smart extruder+ and when I saved a file to a USB to print, the printer said that the file was for a smart extruder not a smart extruder +. How do I find out if I am saving the correct file for my 3d printer?
Hello everyone I have a prusa i3 v8 from makerfarm and it is running very old Marlon firmware what I'm trying to do is I want to install a Z probe for ABL I have the latest 1.1.0-rc7 firmware but configuring it is a little beyond my skill set for now I was wondering if any of you have had any success with this printer and the proximity sensor if so could you share your settings or configuration.h file Thank you for your help Tim
+Timothy McGuire What your asking is not so simple, another's configuration.h file will not be terrible useful for you, even from a similar machine. If all your looking for is what setting to enable, you would be much better served researching this in the marlin documentation.
I designed this for a 5/16" rod, I also made a file for an 8mm rod, but it is untested. If you use the 8mm file, please let me know if it works well or if it is too tight.
With bike season coming up, Pinshape just launched a bike accessory design contest and the top prize is a Form 2 3D Printer! Good luck to everyone who enters and let me know if you have any questions :)