Stream

Join this community to post or comment

Steve Spence

Whatcha Makin'?  - 
1
Add a comment...
 
This tutorial is about how to program a microcontroller over an #arduino. Like this you can make projects with more devices or bigger projects without buying more arduinos.
 ·  Translate
1
Add a comment...

John Shovic

Whatcha Makin'?  - 
 
Solar Power Robot System Description Part 1:  *SunRover* #solarpower Robot for #raspberryPi / #arduino  http://bit.ly/1KE1l85
SunRover is a solar powered IOT robot built on both a Raspberry Pi and an Arduino controlling many sensors and a pan/tilt camera.
1
Add a comment...

Tom Howbridge

Young Makers  - 
 
Here is one of my older and most popular videos.

Subscribe for new videos every week !
2
1
モレノアリ(アリー)'s profile photo
Add a comment...
 
Una 8x8 di #LED controllata da #Olimexino85? Si può fare seguendo questo semplice #tutorial.
E si può fare anche con UNO R3 ovviamente !
http://aspettandoilbus.blogspot.com/2015/08/max7219-e-olimexino-85.html
 ·  Translate
Ciao e ben ritrovato sul Blog Aspettando il bus, oggi collegheremo l' Olimexino 85 ad una matrice di LED 8x8, controllata dal Max7219. Realizzeremo lo stesso progetto fatto per Arduino UNO R3 ma utilizzeremo l' Olimexino 85 c...
2
1
Julio Cesar Sys's profile photo
Add a comment...
 
 
I need desperate help with Marlin firmware!
I have downloaded the latest release but when compiling in arduino ide i get all sorts of errors from "lcd_contrast not declared" to "delta" errors and much more.

The former firmware i downloaded worked fine some files got saved with wrong settings so I wanted a fresh firmware. But now i can't compile it...

Anyone knows what is going on?
1
Add a comment...

Tom Howbridge

Young Makers  - 
 
I enjoyed editing this one !
4
2
Joshua CleverUnderDogs's profile photoTag Schatten's profile photo
Add a comment...

Amanda S

3D Printing  - 
 
 
If someone were to ask me exactly what I dislike the most about my daily routine, I would probably say "when my alarm clock goes off in the morning." None of us
1
Add a comment...

John Shovic

Whatcha Makin'?  - 
 
A very happy Raspberry Pi and Arduino Mega 2560 in the Caribbean.  http://www.switchdoc.com/2015/08/3-months-in-paradise-project-curacao-happy/
Project Curacao at 3 months. Everything is running well after the loose wire incident. Pictures and MatPlotLib Graphs.
4
Add a comment...

Created by

About this community

A place for the maker community to gather and discuss everything from the nuts and bolts of making to project inspirations and far loftier aspirations.

Braxton Wirthlin

Whatcha Makin'?  - 
 
Here's a tap handle I turned from white oak with an alumilite inlay and a laser engraved logo top. I did it in collaboration with Zac Higgins at NV Woodwerks. He handled the casting and laser engraving, and I took care of the turning. Check it out and let me know what you think. 
2
Add a comment...

Tom Howbridge

Young Makers  - 
 
Thank you very much !
2
Add a comment...
 
Please tell me what you guys think and help me improve my content!
1
Add a comment...

Daimon Sweeney

Electronics  - 
 
I have a project I'd like someone to make for me, for cash, if it's cool to do things like that here. It's to demo a concept. The thing is a wooden platform about 6" diameter and a couple of inches high (more is ok if needed to make it work). It has an electromagnet in it that can be dialed up to full power and down to zero using a dial on the side. The top doesn't have to be wood. It could be metal or anything but I want it to look nice. The aim is to have a pile of paperclips or other small metal objects and demonstrate how more charge lets you build a taller, stronger structure, then as the juice dials down (as the charge decreases) the paperclip structure slumps and at "off" it has no structure at all. Is there a way I should go about making this request?  Email me at daimon.sweeney@gmail.com if you're interested or have a suggestion about how to get this made. I have no way to do it myself. 
1
Add a comment...

Mark Wilson

Whatcha Makin'?  - 
 
"Dovebox" - a simple test of my method for making laser-cut dovetail joints.  See the flickr album https://flic.kr/s/aHskjm4BFz
19
1
Mark Wilson's profile photoSam Freeman's profile photo
3 comments
 
I think I just realized I've been waiting for this for years.
Add a comment...

John Shovic

Raspberry Pi  - 
 
Bright Bright Bright LED Control with your #raspberrypi using the SwitchDoc Labs Quad Power Management Board.
http://www.switchdoc.com/2015/08/bright-bright-bright-led-s-controlled-by-the-qpm-board/
This posting shows how to connect a 3W super bright RGB LED to a Raspberry Pi by using a Quad Power Management board controlled by I2C.
3
Add a comment...

Alain Mauer

Raspberry Pi  - 
 
Hi I want to present my finished Raspberry Pi Project: The Raspitrap
http://awallelectronic.blogspot.com/2015/08/raspitrap-v10_27.html
Videos Hi all, I want to present my Raspberry Pi project. An animal friendly mousetrap with photo, video and email function. You may ask, why somebody would build such a mousetrap? Why not? C.A.D. Design ...
5
Add a comment...

Alex Larson

3D Printing  - 
 
I need some guidance from the group here. I am a high school teacher who just recieved a grant for $1400 and I am looking to pick up a small 3d printer that is reliable and easy to maintain.  I currently have a Stratasys 1200SST but need something small for specific uses etc. etc.

What recommendations do you have of something that is that price or lower?  I would prefer a smaller footprint if possible.

Thanks.
1
Michele Conati's profile photoRon Grosinger's profile photo
11 comments
 
+Alex Larson Call or email Alfredo at Pico.  They have several 3D printer options.  I gave him your info too.

Alfredo Orejuela
Education Outreach Director
alfredo@picoturbine.com
P: 877-731-9966
D: 917-426-1399
F: 877-577-1887
www.picoturbine.com
Add a comment...
 
This post is about how to upgrade a racing car with an #arduino  , in order to control it via bluetooth. Like this you can not only steer your car over a touchscreen, but you can use the enhanced possibilities of a computer(Internet, GPS, ...).
 ·  Translate
Nachdem ich bereits in einem vorherigen Post erklärt habe, wie man mittels einem Arduino ein RC Auto in einen Roboter verwandeln kann, möchte ich heute darauf eingehen, wie man eine Bluetoothfernsteuerung für den Roboter baue...
1
1
Bob Vermillion's profile photo
Add a comment...

Payan Canaran

In the Shop  - 
 
#Free "3D Printing Primer - A Survey of Technologies and Principles" from +O'Reilly  http://oreil.ly/1U82yVX  #3DPrinting
2
1
Nanik T's profile photo
Add a comment...