Profile

Cover photo
king jakob
83 followers|3,497 views
AboutPostsPhotosYouTube

Stream

king jakob

Tutorials  - 
 
Im having some problems installing...

1. I cant select "Azteeg X1 controller" from Arduino although patch is copied to hardware-folder..

2. I uploaded Marlin firmware using board: Arduino Mega 2560 and port: dev/tty.usbserial-AH015EFL

3. The only time i managed to connect to the printer via ReplicatorG the temp is at 33,5 degrees C... Nothing happens though... and since then i cant connect again... this is where its stuck:
12:36:00] Connecting to machine using serial port: /dev/tty.usbserial-AH015EFL
[12:36:00] Initializing Serial.
[12:36:00] GCode sent. waiting for response..
[12:36:00] marlin 1.0.0
[12:36:00] GCode sent. waiting for response..
[12:36:00] Supports RC
[12:36:02]  last updated: jun 11 2013 23:09:start
[12:36:02]  external reset
[12:36:02]  last updated: jun 11 2013 23:09:23 | author: (none, default config)
[12:36:02]  free memory: 13725  plannerbufferbytes: 1232
[12:36:10] GCode sent. waiting for response..

I have NO IDEA what it is I am supposed to be doing to get it to work now..

System Information
 ReplicatorG version: 0040
 Java version: 1.6.0_51

Machine
 Profile Name: Klimentkip (115200 Baud)
 Driver Type: RepRap5D
 Name: Klimentkip (115200 Baud)
 Motherboard firmware version: 5D v0.1

Machine Driver XML:
<machine experimental="0">
<name>Klimentkip (115200 Baud)</name>
<geometry type="cartesian">
<axis endstops="min" id="x" length="205" maxfeedrate="5000" stepspermm="31.496"/>
<axis endstops="min" id="y" length="195" maxfeedrate="5000" stepspermm="31.496"/>
<axis endstops="min" id="z" length="140" maxfeedrate="200" stepspermm="1133.858"/>
</geometry>
<tools>
<tool collet="false" fan="true" floodcoolant="false" heatedplatform="true" heater="true" material="abs" mistcoolant="false" motor="true" motor_steps="1000" name="Stepper-based extruder" stepper_axis="a" type="extruder" valve="false"/>
</tools>
<clamps/>
<firmware autoupgrade="false" url="???"/>
<help name="Gcode Help" url="http://reprap.org/wiki/Gcode"/>
<driver name="reprap5d">
   <okAfterResend>true</okAfterResend>
   <pulserts>false</pulserts>
   <waitforstart enabled="false"/>
   <debugLevel>0</debugLevel>
   <fived>true</fived>
   <rate>115200</rate>
</driver>
<warmup>
</warmup>
<cooldown>
</cooldown>
</machine>
1
king jakob's profile photoModerator's profile photo
10 comments
 
driver seems fine... i've put both the x&y-axis on the z and they seems to be working fine..
Add a comment...

king jakob

Tutorials  - 
 
Is there any "from beginning to end" tutorials on how to actually put the printer together? I'm seeing bits and pieces, but not sure where everything goes to properly put it all together.. anyone who did a youtube or photo journal of the build?
1
Moderator's profile photo
 
There really is not any ordering to the build. Once you have the connectors attached and the resistor in the hotend it is just a matter of plugging everything into the controller board.

If you're stuck or not sure about something post here and I'll help out. I'm still moving boxes from the move, but I am at least to the point where I am back to checking the inets 20 times a day. haha.
Add a comment...

king jakob

Shared publicly  - 
 
Saturday 29 June... MAD FYAH! Viet Experiment!... Vietnamese Reggae... Saigon Rockers Dubplates... Top Reggae and Dancehall Selections... Live Jams... Rub-a-Dub Sessions... Jamaican Food... Good Vibes!
1
king jakob's profile photo
 
Saturday 29 June @ 8 pm until very late...
Cargo Bar, 7 Nguyen Tat Thanh, Q4, Saigon
Add a comment...

king jakob

Shared publicly  - 
 
I can honestly say that this month's Mad Fyah will be the biggest live night-time event to ever happen in Saigon. Nuff said.

Saturday 25 May @ 8 pm until very late...
Cargo Bar, 7 Nguyen Tat Thanh, Q4, Saigon
4
Paul Trinh's profile photoThomas Kunambi's profile photo
2 comments
 
Fun!
Add a comment...
Have him in circles
83 people
Paolo Euvrard's profile photo
allan louie's profile photo
Jase Nguyen's profile photo
anicia karan's profile photo
Bernard Caranto's profile photo
Mads Monsen's profile photo

king jakob

Tutorials  - 
 
i dont know where to connect the stepper motor on the curcuit board.. i know they go in the 5 connectors in the back of the board, but which one goes where?
1
David Cushing's profile photoking jakob's profile photoModerator's profile photo
4 comments
 
+king jakob BookMark that. I use it ALL the time. I even did a crude drawing of it and keep
it under the bot for quick a reff.

Oops, bot's ready for printing and drooling everywhere and I'm sitting here typing to you
:P
Add a comment...

king jakob

Shared publicly  - 
 
How do you send direct messages to people on this thing?
1
Frederik Wissink's profile photoking jakob's profile photoEliel Jougla's profile photobarry do's profile photo
6 comments
 
just post something and then remove the public button and put their name instead. you can do that for 1, 2, or more people
Add a comment...

king jakob

Shared publicly  - 
 
hello world!
1
Philip Deans's profile photo
 
welcome to G+
Somewhat slow at the moment...
Add a comment...
People
Have him in circles
83 people
Paolo Euvrard's profile photo
allan louie's profile photo
Jase Nguyen's profile photo
anicia karan's profile photo
Bernard Caranto's profile photo
Mads Monsen's profile photo
Links
YouTube
Basic Information
Gender
Male