Profile cover photo
Profile photo
Laurels Electronics Inc
36 followers -
Digital Panel Meter, Laurels Electronics, Counters, Transmitters, 420-ma
Digital Panel Meter, Laurels Electronics, Counters, Transmitters, 420-ma

36 followers
About
Posts

Post has attachment
Laureate™ Dual-Channel Pulse Input #Totalizer - The #Laureate #dual-channel up or down totalizer is a basic operating mode of the Laureate #counter with the FR dual-channel signal conditioner board. Each channel (A or B) may be independently set up and scaled to count up from zero (or other value) to a preset limit, or to count down from a preset value to zero (or other limit).

Post has attachment
The Laureate #quadrature #transmitter accepts A & B quadrature encoder signals to provide an analog output that tracks position, length, angle, or rate. The A & B quadrature signals are 90° out of phase, and their phase relationship determines whether up counts (+) or down counts (-) are produced.

Post has attachment
The #Laureate #pulse input #totalizer #transmitter accepts two independently scalable input channels from a wide range of pulse sources, such as NPN or PNP proximity switches, contact closures, #digital logic, magnetic pickups down to 12 mV, or AC voltages to 250 Vac

Post has attachment
The #Laureate #Ohmmeter is ideal for high-speed, high-accuracy resistance measurements in a production environment, such as contact resistance measurements. It is factory calibrated for five jumper selectable resistance ranges from 20.000 ohm to 200.00 kohm.

Post has attachment
#Laureate™ #Quadrature #Encoder #Input #Meter for #Position or #Rate - The Laureate™ quadrature meter with the Standard counter main board accepts the A & B quadrature signals from linear encoders and shaft encoders to provide a highly accurate, scaled display of position, length, or angle in engineering units, such as ft, cm or degrees.

Post has attachment
4-20 mA & #Serial #Data Output #Transmitter for #Process & Ratio Signals - The Laureate 4-20 mA and RS232/RS485 output, #process #signal input transmitter provides zero and span adjustment for use with a wide range of industrial transducers. Six DC voltage and four DC current input ranges are jumper selectable. The two most sensitive voltage ranges, 200 mV and 2V, provide a high input impedance of 1 GΩ to minimize the load on the voltage signal.

Post has attachment
Laureate™ #DC #Voltage & #Current #Digital #Panel Meters - Digital filtering is selectable for electrically noisy environments, including a batch averaging filter and an adaptive moving average filter which provides a choice of 8 time constants from 80 ms to 9.6 s.

Post has attachment
Laureate™ Load Cell, #Strain #Gauge & #Microvolt #Digital #Panel #Meter - Load cell meter operation provides sensitivity down to ±20 mV full scale for use with 2 mV/V #load #cells at 10V excitation. Ratiometric operation automatically compensates for changes in excitation. The 5 digit display can be scaled for direct readout in engineering units, such as pounds, kilograms or PSI

Post has attachment
The Laureate #load #cell or #microvolt input #transmitter is designed for use with load cells, #strain #gauges and microvolt input signals where exceptional sensitivity and stability are required. A most sensitive full-scale input range ±20 mV can be scaled internally to ±99,999 counts.

Post has attachment
RS232 Interface Board for #Laurel #Electronics 1/8 DIN Instruments - The Laureate #RS232 serial communication board allows a Laureate 1/8 DIN #digital #panel #meter, #counter or #timer to be interfaced to an external device with an #RS232 #serial #communication port, such as a PC, PLC or other #instrument.

Wait while more posts are being loaded