Profile cover photo
Profile photo
No Limit Manufacturing
18 followers
18 followers
About
Posts

Post has attachment
Another happy customer running our ported IH cylinder head, intake manifold, and exhaust. this what he had to say, "We're rattling some heavy hitters cages down here!!!!!! We've been blessed as for a third one second and two first place finishes in three tracks!!!!!"
Add a comment...

Post has attachment
Add a comment...

Post has attachment
Add a comment...

Post has attachment
Add a comment...

Post has attachment
Add a comment...

Post has shared content
New Cummins 12V Roller Rocker Arms

Cummins 12V Roller Rocker Arm Kit Add durability and performance to your valve train with No Limit’s roller rocker kit for 12v Cummins engines. Corrected Rocker Arm Geometry reduces the amount the roller tip travels across the valve tip, and translates…
Add a comment...

Post has attachment
Add a comment...

Post has attachment
Now offering camshafts with gears. We just completed cams for Red Diamond, IH 301, and a Waukeshaw 310 all with a gear on them. Gears are cut in house. This is a IH 301. 
Photo
Photo
2014-07-18
2 Photos - View album
Add a comment...

Post has attachment

New Cummins steel camshafts. Featuring an induction hardened steel core, larger radius on camshaft beams, and nose drilled and tapped for a cam gear retainer. Made in the USA.

 Standard Camshaft Profiles Available
 186-209 - 107.5 LSA Cam Lift .295/.310 (Fuel/Tow Cam) $650.00
 186-215-108.5 LSA Cam Lift .300/.315 (More Performance than fuel tow cam, but with more valve clearance than the Street/Strip Cam) $650.0
 187 - 220 - 108.5 LSA Cam Lift .306/.322 (Street/Strip Cam)$650.00
 208-221-108 LSA Cam Lift .360/.360 ( All out performance cam for drag racing, and pulling. Featuring a quicker lobe, and increased durations at lower lifts. Requires higher spring pressure, and the use of 1.300 in. tappet dia. or larger.) $650.00

 Custom Camshafts

 We know that one size does not fit all. So if you know you need a different profile, or want us to examine your engine build, and recommend a profile, we have the ability to customize and alter all of our cams. We also added two cores that allow us to grind a wider range. 

 Custom Ground Steel Core: $840.00

 Flat Tappet Custom Core: 215-230 Int. Dur. - .365-.385 lift / 220-240 Exh Dur. - .365-.385 lift. LSA - 106-108. $840.00

 Roller Lifter Custom Core: 232-248 Int. Dur. .360.375 lift / 242-260 Exh Dur. - .365-.380 lift. LSA 106-108.5. $840.00

 And if you need some thing wild or out side our steel core selection, we can build you one of our custom tool steel cams. Any thing goes on these cores. Custom journal size, lobe width, lobe separations, lifts, and durations. 

 So what ever your needs are we have you covered.
 
Photo
Photo
2014-07-16
2 Photos - View album
Add a comment...

Post has attachment
New Tool Steel Camshafts for Duramax. Custom ground to any firing order, or lobe profile. We have added a new oiling port to help oil the camshaft gear thrust plate, larger radius in the nose and beams for strength, and reduced beams for weight. 
Photo
Add a comment...
Wait while more posts are being loaded