Profile cover photo
Profile photo
Fantomu
77 followers
77 followers
About
Communities and Collections
View all
Posts

New meeting place
1757 n nova rd suite 112 holly hill Florida
They have hours set 4-12 but even that is flexible right now
What time and day would be the best for everyone?
I’m trying to make this a twice a month thing now that we have a set space.

There is a new makerspace opening off of Nova road by classy kids.

I'm rebuilding my RB1 Big after it has been in storage for a bit because of a mold problem in an adjoining room. So we have the tank mod with a new Nema 17 Bowden setup now. We tried to do the first boot on it and, I get the blue light on the power supply then turn the system on and the light goes off and nothing, anyone have any ideas?

Post has shared content
Nice printer
All, I have been assembling a larger size Talos printer with print area that is larger than a TAZ5 printer over the last few weeks.

I was looking for a printer with the direct drive #Bondtech mini extruder, to try flexible filaments that was not easily possible on the HercuLien or Rostock MAX V2. I still have tuning to do but the first prints have been exceptional with limited amount of tuning and will start soon with Flexible filaments.

My TAZ4 donated the glass and a few minor items, the rest is all new with 110VAC heat bed. The Talos all metal printer design is far more rigid, prints at higher speeds and quality than my TAZ4. Several of the printers parts (metal and plastic) were adjusted to match my selected components, and a few new ones were added.

I agree with +Eric Lien, +Alex Lee you designed a heck of a printer, far superior in print quality and overall print speed than the TAZ4 it has replaced and this printer gives the best surface finish of any of my 3 printers.

Here are a few quick images of the printer and some calibration pieces that were printed on this Talos.
PhotoPhotoPhotoPhotoPhoto
1/28/16
11 Photos - View album
Add a comment...

Post has attachment

Ok so a new problem I was printing well last night. Then I started a print and went to walk the dog came back and nothing. Sat down here thinking that it was something just taking a while to heat up after a hour more i turned it off and went to bed. 

Rigidbot big all base components
Troubleshooting so far
Restarted everything reset the printer (and killed power) ran a autotune (M303 S230 C10) to make sure its working. And I am at this point. 
I can turn the printer off after reset and preheat the tip and the bed the bed takes 45 min to heat up.
I have full XYZ extrude reverse set temp controls.
When I hit print the command is given on the command line and nothing happens.
I push pause to get out of currently printing and, I have no control over XYZ extrude or set temp controls until reset and restart.

Ok so a new problem I was printing well last night. Then I started a print and went to walk the dog came back and nothing. Sat down here thinking that it was something just taking a while to heat up after a hour more i turned it off and went to bed. 

Troubleshooting so far
Restarted everything reset the printer (and killed power) ran a autotune (M303 S230 C10) to make sure its working. And I am at this point. 
I can turn the printer off after reset and preheat the tip and the bed the bed takes 45 min to heat up.
I have full XYZ extrude reverse set temp controls.
When I hit print the command is given on the command line and nothing happens.
I push pause to get out of currently printing and, I have no control over XYZ extrude or set temp controls until reset and restart.

Post has attachment
Is this something I should worry about and how might I fix it ?

Post has attachment
I'm trying to get his abs to print is this something to worry about or just something that happens?

Post has shared content
I just saw that the Replicape is now in kickstarter with delivery of the first batch of boards in November.
Add a comment...
Wait while more posts are being loaded