Profile cover photo
Profile photo
Chanchai Lim
About
Chanchai's posts

Post has attachment
Waveshare 7inch HDMI LCD (C) and 5inch HDMI LCD (B) on NOOBS
HDMI LCD Waveshare 7 inch HDMI LCD (C) http://www.waveshare.com/7inch-HDMI-LCD-C.htm Waveshare 5 inch HDMI LCD (B) http://www.waveshare.com/5inch-HDMI-LCD-B.htm NOOBS (Raspberrry PI) https://www.raspberrypi.org/downloads/noobs/ First write NOOBS Image to SD...

Post has attachment
How to Disable Power Management of rtl8192cu
Fix problem wireless disconnect and go to save mode. Create file /etc/modprobe.d/8192cu.conf $ sudo nana /etc/modprobe.d/8192cu.conf add this line options 8192cu rtw_power_mgnt=0 rtw_enusbss=0 Restart raspberry pi Reference : https://github.com/xbianonpi/xb...

Post has attachment
How to use own remote control for OpenELEC
IR Receiver (TSOP44.., TSOP48.., TSOP38238, ...) Connect IR Receiver to Raspberry Pi Vcc -> 3V GND -> GND Vout -> GPIO 18 Load LIRC module on boot. Edit /boot/config.txt Add line dtoverlay=lirc-rpi or (change GPIO pin in for IR Receiver) dtoverlay=lirc-rpi,...

Post has attachment
VNC Server for Raspberry PI with dispmanx
You can remote console of raspberry pi with dispmanx Install libvncserver-dev, gcc and g++ version 4.7 $ sudo apt-get install gcc-4.7 g++-4.7 libvncserver-dev Update alternatives version of gcc and g++ $ sudo update-alternatives --install /usr/bin/gcc gcc /...

Post has attachment
VNC Server for Raspberry PI with dispmanx
You can remote console of raspberry pi with dispmanx Install libvncserver-dev, gcc and g++ version 4.7 $ sudo apt-get install gcc-4.7 g++-4.7 libvncserver-dev Update alternatives version of gcc and g++ $ sudo update-alternatives --install /usr/bin/gcc gcc /...

Post has attachment
How to use VNC Server on Raspberry PI
If you want to remote to Raspbian with X Windows Desktop, you can use vnc server. Install TightVNC Server . $ sudo apt-get install tightvncserver After install finished. Start vncserver . $ tightvncserver :<DISPLAY NUMBER> Example : Start VNC Server on Disp...

Post has attachment
How to use VNC Server on Raspberry PI
If you want to remote to Raspbian with X Windows Desktop, you can use vnc server. Install TightVNC Server . $ sudo apt-get install tightvncserver After install finished. Start vncserver . $ vncserver :<DISPLAY NUMBER> Example : Start VNC Server on Display n...

Post has attachment
Geniatech DVB-T2 Stick T220 for OpenELEC on Raspberry Pi
Linux kernel 3.14 and later is support Geniatech DVB-T2 Stick T220 Driver. Current version of OpenELEC support it. Raspberrypi kernel source code https://github.com/raspberrypi/linux If you use OpenELEC, current firmware (version 4.0.x and later) is support...

Post has attachment
Geniatech DVB-T2 Stick T220 for Raspbian
Linux kernel 3.14 and later is support Geniatech DVB-T2 Stick T220 Driver. Current version of Raspbian support it. Raspberry PI kernel source code https://github.com/raspberrypi/linux Below for old kernel. I try to find driver for Geniatech DVB-T2 Stick T22...

Post has attachment
How to use DS3231 I2C Real Time Clock
Before use DS3231 I2C Real Time Clock. Enable I2C Interface. On new kernel use Device Tree Overlays. Edit on /boot/config.txt. add new line device_tree_param=i2c1=on dtoverlay=i2c-rtc,ds3231 Reference :  https://github.com/raspberrypi/firmware/tree/master/b...
Wait while more posts are being loaded