Profile cover photo
Profile photo
Anna Ou
About
Posts

Post has attachment
Appliance Stability Lab Test Machine ZLT-WD3
To determine the stability of electric appliances which are used on a table or on the floor, in accordance with IEC60065 clause 19.1, IEC60335-1 clause 20.1, IEC60601-1 clause 24.1, IEC 60950 clause 4.1.1. The device consists of a surface and a threaded spindle with handwheel for adjusting the incline of the table board from the horizontal up to 30°against the horizontal.
Standard Outfit:
1 table board, with supporting frame.
1 base plate with hinges for the supporting frame and for the spindle bearing.
1 threaded spindle with handwheel for adjusting the incline of the table board from the horizontal up to 30°against the horizontal.
1 inclination angle measuring instrument, to mount at the table board, for checking the angle of inclination of the table board.
https://goo.gl/4HbJRk
Photo
Add a comment...

Post has attachment
Needle Flame Burner
Model: ZLT-ZY2
The ZLT Needle Flame Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. The Needle Flame Tester consists of a Ф0.9mm needle burner that tilts to 45° from the vertical and is fueled with butane gas. The test time for the temperature of the standard copper block to increase from 100°C ±5°C to 700°C ±3°C shall be 23.5s ±1.0s. Test flame height is adjusted 12mm ±1mm.The fire hazard of the specimen is assessed by measuring the burning duration of the specimen, and any ignition of the wrapping tissue and white pine board below the specimen. It consists of a tube with a bore 0.5/font> 0.1mm and gas-flow regulating valve for adjustment of the flame height. It shall be used with a pressure regulator. The instrument is designed to conform to the IEC60695-11-5, IEC60695-2-2 and other most commonly used standards in the market.https://goo.gl/OsiYuu
Photo
Add a comment...

Post has attachment
Appliance Stability Tester
Product details: Model ZLT-WD2
Table Diameter : 800mm Manual Control
ZLT-WD2D : Electric Model
To determine the stability of electric appliances which are used on a table or on the floor, in accordance with IEC60065 clause 19.1, IEC60335-1 clause 20.1, IEC60601-1 clause 24.1, IEC 60950 clause 4.1.1. The device consists of a surface and a threaded spindle with handwheel for adjusting the incline of the table board from the horizontal up to 30° against the horizontal.

Standard Outfit:
1 table board, with supporting frame,
1 base plate with hinges for the supporting frame and for the spindle bearing,
1 threaded spindle with handwheel for adjusting the incline of the table board from the horizontal up to 30°against the horizontal,
1 inclination angle measuring instrument, to mount at the table board, for checking the angle of inclination of the table board,
https://goo.gl/1CWSdh
Photo
Add a comment...

Post has attachment
IEC60068-2-75 Spring Impact Hammer ZLT-CJ2
Required by many Standards to test the mechanical integrity of product enclosures. After applying the impact with the hammer, the product is examined with accessibility probes to determine access to shock, energy, and injury hazards. Built in exact accordance to IEC60068-2-75 Ehb, EN, UL, CSA and other international Standards.
Product Details:
Model:ZLT-CJ2:Impact energy of 2J±0.1J,mass of striking element is 500g, hammer heads made of steel with r=25 mm, 10 N release force.
Body: Includes release mechanism and striking element guide, mass 1250 g, outside diameter 50mm.
Striking element: With cocking knob and with hammer head, face is polyamide, hemispherical with a radius of 10 mm, hardness of HR85-100, mass 250 g, length approx.310mm.
Release Cone: mass 60 g, release force ≤10N.
Impact Force: Single force and adjustable models available in impact energies of 0.20, 0.35, 0.50, 0.70 and 1.0 J, mass of striking element is 250g.
Custom padded carrying case included.
Model:ZLT-CJ1:Single fixed impact energy models(0.14J ±0.014 J, 0.20J±0.02J, 0.35J ±0.03 J, 0.50J±0.04 J, 0.70J±0.05 J or 1.0 J±0.05 J, select)
Model:ZLT-CJ3:Adjustable models with five impact energies of 0.20 J± 0.02 J, 0.35 J±0.03 J, 0.50J±0.04J, 0.70 J±0.05 J and 1.0 J±0.05 J, mass of striking element is 250 g.
Model:ZLT-CJ5: Impact energy of 5 J±0.25 J, mass of striking element is 1.7 kg, hammer heads made of steel with r=25 mm, 10 N release force.
Conforms To: IEC60068-2-75 Test Ehb, IEC60065, IEC60335-1, IEC60598-1, IEC60745-1.https://goo.gl/nDBOfs
Photo
Add a comment...

Post has attachment
Equipment to Load the Samples with Current
Product details:Model ZLT-HZ1
Installed into the test machine ZLT-DW2, housing fitted with protective cabinet to screen off the conductor ends, which carry mains voltage.
Number of the current loaded conductors: 3
Input voltage: AC 220V 50Hz, other voltages and frequencies on request.
Output voltage: 0~250V adjustment.
Output current: 0~40A adjustment.
Ammeter accuracy:± 0,3% F.S±3 digit.
https://goo.gl/BXhl7G
Photo
Add a comment...

Post has attachment
Jointed Test Finger Probe for Blenders

Model: ZLT-I02B
Conform to the IEC60335-2-14 clause 20.2. Means of a test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger and the stop face being 100 mm. https://goo.gl/TJvw2A
Photo
Add a comment...

Post has attachment
Jointed Test Finger Probe for Blenders


Model: ZLT-I02B

Conform to the IEC60335-2-14 clause 20.2. Means of a test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger and the stop face being 100 mm. https://goo.gl/TJvw2A
Photo
Add a comment...

Post has attachment
Articulating Finger Probe


Model :ZLT-I02A

Conform to the IEC60335-1 clause 20.2. Means of a test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 50 mm, instead of the non-circular face.

With Dynamometer 5N±0.5N, Model ZLT-I02AT
https://goo.gl/UdKGJg
Photo
Add a comment...

Post has attachment
Jointed IEC Test Finger ZLT-I02
This is the “International” test finger required by most IEC61032 test probe B, EN and CSA Standards, in addition to many UL Standards. Built in strict accordance to the newest requirements with integral palm simulator. The handle and stop face are made of nylon.Finger is made of stainless steel. All parts precision machined.

Model : ZLT-I02T , with dynamometer 10N ±1N
https://goo.gl/ycCFmR
Photo
Add a comment...

Post has attachment
Test Sphere Dia 50 mm with Handle ZLT-I01
This probe is intended to verify protection of persons against access to hazardous parts for an IP1 Code.Also used to verify protection from access with the back of the hands for an IP suffix A code. This probe is comform to IEC61032 test probe A and IEC60529 IP1 and other standard . Without dynamometer ,model ZLT-I01 With dynamometer 50N+-5N,model ZLT-I01T
https://goo.gl/C0ZN23
Photo
Add a comment...
Wait while more posts are being loaded