Profile

Cover photo
Thong Nguyen
Works at International Peace Institute
Attended Columbia University
108 followers|137,841 views
AboutPostsPhotosYouTube

Stream

Thong Nguyen

Shared publicly  - 
In this updated edition of the International Peace Institute's Catalogue of Indices, over 60 indices and indicators...
1
Add a comment...

Thong Nguyen

Shared publicly  - 
1
Add a comment...

Thong Nguyen

Shared publicly  - 
1
Add a comment...

Thong Nguyen

Show-n-tell  - 
 
Congratulations to Piercet for winning first place in the Lulzbot Music Maker contest! http://www.bld3r.com/obj/5848589574078464

See the 2nd and 3rd place finishers at:
www.reddit.com/r/3Dprinting/comments/21nsze/winners_of_the_lulzbot_3d_printing_contest/
The Trombone! project is an attempt to create a fully operational, full size, playable trombone using pieces printed on a standard sized 3D printer, using as many 3d printed parts as are feasible. With the exception of the slides and the backbone, all the green parts in the picture are 3D printed, may be printed without support, and can be printed on a 200mm x 200m x 160mm Lulzbot Ao-100 or equivalent printer. This trombone was created to ensure ...
2
1
Thong Nguyen's profile photo
 
Moderators, I hope my enthusiasm for the contest wasn't too annoying!
Add a comment...

Thong Nguyen

Show-n-tell  - 
2
Shachar Weis's profile photoJoe Spanier's profile photo
2 comments
 
theres a link in the youtube
Add a comment...

Thong Nguyen

Shared publicly  - 
1
Add a comment...

Thong Nguyen

Shared publicly  - 
1
Add a comment...

Thong Nguyen

Shared publicly  - 
1
Add a comment...

Thong Nguyen

Show-n-tell  - 
 
Corona688 designed a functional pump with STL and SCAD parts.

http://www.bld3r.com/obj/5784157816881152
A 3d-printable rotary displacement pump modelled in OpenSCAD. As a vaccuum pump it's no good, but it actually pushes pretty well! <br><br> It requires vitamins like plexiglass, silicone, and a few screws. I "cheated" with plexiglass and silicone to make better top and bottom seals and turned the outlets sideways to avoid cutting through them. <br><br> It is extremely satisfying to post a pump that works! I've been fighting with innumerable design...
2
Nathaniel Stenzel's profile photo
2 comments
 
+Joe Kremer "All pumps work in a very similar way to the gif above"? I disagree.
Add a comment...

Thong Nguyen

Show-n-tell  - 
 
A carousel harp! An array mbria! Now people are getting inventive!  Just hours left on the Lulzbot/Reddit music maker contest. http://www.reddit.com/r/3Dprinting/comments/1zceg7/lulzbot_march_3d_printing_challenge_make_some/

Harp: www.bld3r.com/obj/5900253735682048
Mbria: www.bld3r.com/obj/5228967527186432
The carousel harp consists of guitar strings stretched across a plexiglass tube, with a free spinning carousel with picks that pluck the strings as it is turned. The STL file consists of a single model of each 3d printed component, except the central "Sun" gear, which could not fit due to file size limitations. The sun gear can be found here: https://www.dropbox.com/s/s0bfnjvj7678sft/Sun%20Gear.stl This is an ongoing project, modeled in...
1
Thong Nguyen's profile photo
3 comments
 
And not least, a fiddle: Bill Cheatum on the F-F-Fiddle
Add a comment...
Work
Occupation
Editorial Assistant
Employment
  • International Peace Institute
    Editorial Assistant, 10 - present
  • Carnegie Council for Ethics in International Affairs
    Ethics and International Affairs Editorial Intern, 1 - 6
  • Columbia University
    Academic Affairs Program Assistant, 9 - 5
  • United States Department of State
    Economics and Science Affairs Intern, 6 - 8
Basic Information
Gender
Male
Education
  • Columbia University
    Masters in International Affairs
  • University of Texas at Austin
    Bachelor of Arts in Philosophy and Government
Links