This is the PIC18F452 Shield. The goal of this project is to build a development board for any of the PIC 18F 40 pin series so that it can be powered up, programmed and used while also connected to a bread board or used as a shield. Since the board connected to a breadboard the PCB layout needs to be as compact as possible. The design this board around the PIC 18F452 microcontroller, the LM7805 +5v regulator to provide power and a standard 6 pin header to connect any ICSP connector to the board and program the PIC. A wire terminal should be used. Adapter / transformer can be used to powerup this dev board.

This is a demonstration how to use the DS18B20 Digital Temperature Sensor send the signal to Bluetooth HC06 Module driven by Arduino Microcontroller.

This is a guide how to wire the 4 channel Relay Board using Arduino Microcontroller used for Home Automation, Bluetooth Remote Switching. for wiring diagram and illustration - http://www.14core.com

Another illustration that demonstrate how to use Bluetooth HC06 on Android to control 4 to 8 channel relay.

Hall Effect Sensor are designed to respond in a wide range of positive or negative magnetic field.

NEXTION HMI 2.8" TFT Touch display screen with NANO and Solenoid.

This is a demonstration using the BH1750FVI the BH1750FVI is a digital light sensor or a digital ambient light sensor that runs on i2c bus interface, this device suitable to obtain the ambient light data for adjusting an LCD or a Keypad Backlight power of mobile phones that detect wide range at high resolution to 1 ~ 65535 LX for wiring diagram and illustration visit www.14core.com

This is the test mode with sound playback module test with mega 2560, for Talking Interactive Smart Car. for mode details and wiring diagram visit www.14core.com