Profile cover photo
Profile photo
René Jurack
well-engineered.net
well-engineered.net
About
René's posts

Post has attachment
Jackie Chan again <3

Post has shared content
GERMAN: Ich starte eine Sammelbestellung für die gefrästen Teile der Wasserkühlung für den DICE. Allerdings werde ich nur die Sonderteile besorgen (Laserteile, Frästeile, Schrauben, Dichtungen), die restlichen Standardteile (Lüfter, Pumpe, Wärmetauscher, Schläuche etc) müsstet ihr euch selber besorgen.
Zeitraum bis die Teile eintreffen ist etwa 6 Wochen nach Bestellung.
Bei Interesse bitte eine Mail an rene@well-engineered.net
=================================
ENGLISH: I'm going to start a collective order for the special milled and lasercut parts of the water cooling for the DICE. However, I will only get the special parts (laser parts, milling parts, screws, gaskets), the remaining standard parts (fans, pump, heat exchanger, tubing etc) you need to get yourself.
Timeframe until the parts arrive is about 6 weeks after order.
If you are interested, please mail to me at rene@well-engineered.net
Photo

Post has attachment
GERMAN: Ich starte eine Sammelbestellung für die gefrästen Teile der Wasserkühlung für den DICE. Allerdings werde ich nur die Sonderteile besorgen (Laserteile, Frästeile, Schrauben, Dichtungen), die restlichen Standardteile (Lüfter, Pumpe, Wärmetauscher, Schläuche etc) müsstet ihr euch selber besorgen.
Zeitraum bis die Teile eintreffen ist etwa 6 Wochen nach Bestellung.
Bei Interesse bitte eine Mail an rene@well-engineered.net
=================================
ENGLISH: I'm going to start a collective order for the special milled and lasercut parts of the water cooling for the DICE. However, I will only get the special parts (laser parts, milling parts, screws, gaskets), the remaining standard parts (fans, pump, heat exchanger, tubing etc) you need to get yourself.
Timeframe until the parts arrive is about 6 weeks after order.
If you are interested, please mail to me at rene@well-engineered.net
Photo

You won't believe it, but if you hit the leadscrew with your elbow you get z-wobble. Astonishing physics... #nextprintruined

Post has attachment
If someone wants to try out airbrush-nozzle printing for cheap: I just added different nozzle sizes and cheaper shipping in my shop.
http://well-engineered.net/index.php/en/shop

Post has attachment
😂
Photo

Post has attachment
Shooting pictures of a local memorial combined with free-to-use software and a 3d-printer results in impressive results!
PhotoPhotoPhoto
05.06.17
3 Photos - View album

Post has shared content
The webcam-window of octoprint is now fixed in height! I LOVE IT!
+Gina Häußge listened to my prayers :D Thank you!
The webcam stream [of octoprint] now (finally ;)) has a fixed height in landscape/unrotated mode as well, meaning no more jumping controls when it loads! The aspect ratio is selectable between 16:9 (the default) and 4:3 via a new setting. And the rotated view is now properly centered. Additionally a little notice informs you about whether the stream is still loading or if loading failed (and if so, what to do about that).

+Gina Häußge listened to my prayers :D Thank you!
The webcam stream [of octoprint] now (finally ;)) has a fixed height in landscape/unrotated mode as well, meaning no more jumping controls when it loads! The aspect ratio is selectable between 16:9 (the default) and 4:3 via a new setting. And the rotated view is now properly centered. Additionally a little notice informs you about whether the stream is still loading or if loading failed (and if so, what to do about that).

Post has shared content
The first happy customer outside of europe :D
I tested Rene's #DICE airbrush nozzle on my printer. The nozzle is very well built and as such gives you clean and precise overhang.

👏👏 
Photo
Wait while more posts are being loaded