Profile cover photo
Profile photo
Beyond Blue Aerospace Corporation
11 followers -
The Suborbital Pilot's Ground School Manual
The Suborbital Pilot's Ground School Manual

11 followers
About
Posts

Post has attachment
Add a comment...

Post has attachment
Fabricated a 22″ long sanding block from a 2 by 4 and 9 x 11 inch 40 grit piece of sandpaper. The sandpaper was cut in half length wise and glued to the 2 by 4. Commenced sanding the NACA Scoop’s urethane foam such that it is level from the landing brake…
Add a comment...

Post has attachment
Flying in the circuit at CYPQ this morning.  The B29 hasn’t left yet so I was able to taxi passed it and get a picture. I posted a video of the flight at the Beyond Blue Aerospace youtube channel. If you are interested in learning to fly tailwheel in the…
Citabria Update – August 6, 2018
Citabria Update – August 6, 2018
beyondblueaerospace.com
Add a comment...

Post has attachment
Mixed a 1:1 ratio of water and Alumiprep#33 in a plastic container and dipped the 16 aluminum inserts into the mixture for abour 3 minutes then rinsed them off with water. Covered the 16 aluminum inserts with Alodine 1201 and let them dwell in the Alodine…
Add a comment...

Post has attachment

Post has attachment
Add a comment...

Post has attachment
Add a comment...

Post has attachment
Add a comment...

Post has attachment

Post has attachment
Trimmed 2-ply of BID cloth to fit on each of the plywood braces between the firewall and the aft landing gear bulkhead. Mixed a batch of epoxy using 142g resin and 54g hardner. Shop temperature 24 deg C and humidity 62%. Applied epoxy to the BID cloth…
Add a comment...
Wait while more posts are being loaded