Profile cover photo
Profile photo
Andrew Newstead
About
Posts

Post has attachment
http://south-buckinghamshire.tiledoctor.biz/renovating-a-terracotta-tiled-kitchen-floor-in-great-holm/

Renovating a Terracotta Tiled Kitchen Floor in Great Holm

The Terracotta tiled kitchen floor in the kitchen house of this house in the residential district of Great Holm, just outside of Milton Keynes had been laid some time ago and was now well worn and dirty. The houses in the area are not that old and so I suspect the floor may have been down since the house was built.

The Terracotta tiles had not been professionally cleaned for many years and the floor had lost its’ lustre where the sealant had worn away and dirt had become ingrained in the tile, the Grout had also darkened. I went over to look at the floor and perform a test clean, so I could give the owner an accurate quote for renovating the floor.

The quote was accepted, and we agreed a date to do the work which would take place over a four-day period. One day to clean the tiles, two days between for it to dry and one day to seal the floor in order to protect it going forward.

Deep Cleaning Terracotta Kitchen Tiles
We started by applying a strong solution of Tile Doctor Pro-Clean to the floor. Pro Clean is a concentrated, multi-purpose high-alkaline cleaner, stripper and degreaser. It is ideal for heavily soiled and neglected floors. After about 10 minutes dwell time we used our scrubbing machine fitted with a black buffing pad to scrub the floor and loosen the ingrained dirt from the pores of the tile.


A wet pick up vacuum was then used to remove the now dirty cleaning solution, we then thoroughly rinsed the floor by hand to remove any trace of cleaning product and so we could inspect the tiles to see if more work was required. In this instance I felt the floor could do with more work, so the process was repeated, and the edges scrubbed by hand.

We let the floor dry a little over lunch but noted a few of the areas were not quite perfect. To get the best result on these areas we then used Tile Doctor Oxy-Gel, this is a stronger gel-based version of Tile Doctor Pro Clean which is perfect for spot cleaning specific stubborn areas.

With the floor clean it was time to turn our attention to the grout and for this we used more Tile Doctor Pro-Clean and a specialized narrow grout brush to meticulously scrub each grout line. The floor was then completely rinsed with water.

The floor was now spotless but before it could be sealed it would need to be dry, so we left specialised drying equipment in the room and allowed the floor two days to completely dry out.

Sealing a Terracotta Tiled Kitchen Floor
After two days we returned, we used a moisture meter to test that the floor was dry enough to seal. It was thoroughly dry, so we were able to carry on with applying the sealer which can be quite time consuming as you have to wait for the first coat to dry before applying the next. In this case the Terracotta proved to be very porous which is not unusual for a clay tile and it took eight coats of sealer before I was satisfied the tiles were fully sealed. The sealer used to protect the floor was Tile Doctor Seal and Go which leaves a nice subtle satin finish on the tiles. Tile Doctor have a variety of sealers available and we select the sealant to suit dependent on the finish the client wishes to achieve.

The customer was absolutely delighted and left a great review (please see the feedback below)

“Andrew explained the process clearly and the floor looks absolutely stunning. It is hard to believe the difference between before and after. I would have no hesitation in recommending Andrew.

Fiona W, Great Holm”
Add a comment...

Post has attachment
http://south-buckinghamshire.tiledoctor.biz/deep-cleaning-dirty-ceramic-kitchen-tiles-in-henley-on-thames/

Deep Cleaning Dirty Ceramic Kitchen Tiles in Henley-on-Thames

This customer from the picturesque town of Henley on Thames got in touch to ask about cleaning and sealing her Ceramic tiled kitchen floor. Now Ceramic tiles are glazed and so normally won’t absorb a sealer so intrigued I scheduled a time to pop over and take a look. When I got here I could see the tiles were in deed dirty but as I suspected they were not Ceramic but micro porous Porcelain which does need to be sealed. In this case the sealer had worn off and dirt had become ingrained in the tiny pores of the tile.

The tiles were a Terracotta style Porcelain, but this was hardly recognisable due to the accumulation of dirt. I discussed all of this with the owner and agreed I would give the tile and grout a thorough deep clean and then reseal them to ensure the dirt was kept out of the pores in the Porcelain going forward.

Deep Cleaning a Terracotta Style Porcelain Tiled Kitchen Floor
As well as cleaning the floor I would need to remove any trace of original sealer if I was to achieve a consistent appearance later. To achieve this, I soaked the tile in a strong dilution of Tile Doctor Pro-Clean which was then left it to dwell for ten minutes, so it could get to work on breaking down old sealers and dirt.

The next stage was to work the Pro-Clean into the floor with a rotary floor buffer running on slow speed fitted with a black scrubbing pad. The cleaning solution soon changed colour with the dirt that became released. The floor was rinsed with water and the soiled cleaning solution extracted using a wet vacuum. The grout given the same treatment but this time by hand using a stiff brush and more Pro-Clean.

The floor was then rinsed again with water and then dried with a wet vacuum. Being micro-porous Porcelain, this didn’t take as long as clay tiles such natural Terracotta or Victorian.

Sealing a Terracotta Style Porcelain Tiled Kitchen Floor
The floor was then left to dry and I returned later to re-seal it for which I used a couple of coats of Tile Doctor Ultra Seal which is a natural look sealer that protects the tile from within by impregnating the pores in the tile with sealant thus preventing dirt from becoming trapped there.

I think you will agree the floor now looks much cleaner and fresher, certainly my customer was happy with transformation and left the following note on the Tile Doctor feedback system.

“My manky old kitchen floor is absolutely transformed. So much easier, quicker and cheaper than getting the floor replaced. Andrew did an amazing job, highly recommended. Yvonne B, Henley”
Add a comment...

Post has attachment
http://south-buckinghamshire.tiledoctor.biz/limestone-kitchen-floor-tiles-transformed-in-knotty-green/

Limestone Kitchen Floor Tiles Transformed in Knotty Green

Below are photographs of a Limestone tiled kitchen floor at a house in Knotty Green near Beaconsfield. The stone floor had lost its polish with use and now appeared flat and unattractive additionally the grout had darkened severely with dirt and was overdue a good scrub to get it clean.

Natural stone is actually a porous material that needs to be sealed in order to prevent dirt from becoming ingrained however unless its maintained constant foot traffic on floor tiles wears down the sealer leaving the stone vulnerable and difficult to clean effectively.

Burnishing and Cleaning a Limestone Tiled Kitchen Floor
If you have read other posts on my website, you will know that we find the best way to restore the appearance of polished stone is through the application of a set of diamond encrusted burnishing pads of varying grits to grind away dirt and slowly build the polish on the stone.

You start with the application of the coarse 400-grit pad which is fitted to a rotary buffer machine and applied to the floor with water to lubricate the process, the resultant slurry is then rinsed off with water and extracted with a wet vacuum. Next is the Medium 800-grit pad and then the Fine 1500-grit pad, both applied in exactly the same way.

Once I had completed the whole floor with three of the four pads I got to work cleaning the grout. For this, I used a strong dilution of Tile Doctor Pro Clean, our reliable alkaline cleaner, in combination with a handheld scrubbing brush. Once the grout was clean I gave the floor another rinse with water and then removed as much liquids and moisture as possible using the wet vacuum leaving it to dry off fully overnight.

Sealing a Limestone Tiled Kitchen Floor
The following day I returned to complete the floor starting with the application of the fourth diamond encrusted pad in the set of four which is a Very fine 3000-grit using a method we call a spray burnish which essentially involves applying the pad dry to the floor with a small amount of water sprayed on the stone. This process closes the pores in the floor and adds a good quality sheen to the tile.

Finally, I applied two coats of Tile Doctor Ultra Seal which is an impregnating sealer that penetrates into the pores of the stone to provide maximum stain protection from within. This sealer is also completely transparent, so it does not affect the natural look of the stone.

The Limestone responded really well to the treatment and the floor now looks like new.
Add a comment...

Post has attachment
http://south-buckinghamshire.tiledoctor.biz/mouldy-ceramic-tiled-shower-renovated-in-uxbridge/

Mouldy Ceramic Tiled Shower Renovated in Uxbridge

Ceramic and most Porcelain tiles are very easy to clean which makes them a good choice for shower cubicles, the one problem you will find though is that due to the cementitious nature of grout the top layer does attract dirt as can silicone. As a result, we recommend rinsing down showers with Tile Doctor Oxy-Pro on a regular basis or the problem will build. Mould can also be a problem especially if your bathroom is quite small or has inadequate ventilation to extract the hot steam in which mould thrives.

This Ceramic tiled shower cubicle at a house in Uxbridge had all these problems and would need something much stronger to deal with the mould and remove the limescale which had also built up. Limescale from hard water is a problem that affects 60% of the UK with the South and East of England is particularly impacted due to the local chalk and limestone geology the water is filtered through. Buckinghamshire is known to have hard to very hard water and these tiny mineral deposits build up slowly on the surfaces of shower cubicles during use.

Deep Cleaning a Ceramic Tiled Shower Cubicle
To get the shower cubicle clean I began by spaying the tile and grout down with Tile Doctor Duo Clean which is a dual action product that is designed to clean grout and remove mould. You leave the product on the tiles for ten minutes and then scrub it in with a stiff brush, it’s hard work and you need to repeat in the stubborn areas, but it gets good results.

The tile and grout were then rinsed down with water and left to dry whilst I popped out for lunch. On my return I dried off any damp areas with a heat gun and took a step back to review the work I had done.

The results were good but unfortunately there were still a few dark stains in the grout which I was unlikely to be able to remove. When this happens, I find the best solution to achieve a consistent appearance is to apply a grout colourant to the grout. Tile Doctor grout colourants come in ten colours are relatively straight forward to apply, I always keep some of the popular colours in stock and on this occasion, I felt a White colourant would work best.

Normally the first stage would be to prepare the grout first with a pre-treater but given the grout had already been scrubbed hard I was able to move onto applying the colourant with a small brush. Grout Colourants not only recolour and rejuvenate the grout lines but also adds a barrier over the grout sealing it in and protecting it from further staining.

Whilst waiting for the colourant to dry I stripped out the mouldy sealant strip between the tile and shower tray and replaced with mould resistant silicone.

The shower cubicle now looks much fresher and I’m sure will be a pleasure to take a shower in.
Add a comment...

Post has attachment
http://south-buckinghamshire.tiledoctor.biz/

Terracotta Kitchen Tiles Refreshed in Buckingham Farm Cottage

I was recently contacted about the restoration of a fantastic example of a Terracotta tiled floor in the kitchen of a farm cottage just south of Buckingham.

There was a very noticeable build-up of dirt on the tiles and in the grout lines. Additionally, there were lots of white spots on the tiles in front of sink area because of a caustic soda spillage. Caustic soda is also known as sodium hydroxide, as is commonly used as a drain unblocking agent. It’s a highly alkaline product and isn’t very friendly to Terracotta.

The grout was also stained and naturally, the homeowner was keen to get her floor back into the best shape possible – and I was on hand to see what could be done.

Terracotta is a very attractive and useful material that has been in use for over two millennia throughout the world. It has been used perhaps most famously for sculptures and other forms of art, although it has since the days of the Ancient Romans been used as a building material – including in the form of floor tiles. It’s still a popular choice for tiles amongst homeowners today, since Terracotta tiles are typically thicker, and the red colour adds a warm country feel to the home.

Cleaning Stained and Dirty Terracotta Kitchen Tiles
Before beginning the restoration, I first removed the kickboards from underneath the kitchen units to protect them from splashes from the cleaning products I would be using.

Once this had been done, I got straight into deep cleaning the tile and grout lines using a strong dilution of Tile Doctor Pro-Clean which is a strong alkaline cleaner. To get the best result I left the solution to soak into the pores of the tile for approximately ten minutes before being agitated with a black scrubbing pad fitted to a rotary machine.

The floor was then rinsed with fresh water and the resulting slurry of soiled cleaning solution was promptly extracted using a wet vacuum. This process left the tiles and grout looking much cleaner and fresher, however, the white spots caused by the caustic soda would need something extra to remove them.

I treated these spots using Tile Doctor Acid Gel in combination with a steam machine. Acid Gel is a mixture of phosphoric and hydrochloric acids in gel form, and can be used to neutralise alkali-based stains such as these. We also commonly use it to treat efflorescence (mineral salt deposits).

The floor was then once again rinsed with fresh water to remove any trace of cleaning products and neutralise the floor, before being left to dry off fully for two days.

Sealing Terracotta Kitchen Tiles
I returned after 48 hours and the floor was dry enough to be sealed. The customer wanted to retain the natural-looking and rustic appearance of the Terracotta, so I suggested that we seal the tiles using Tile Doctor Colour Grow. This sealer is impregnating and colour-intensifying (so it emphasises the patina of the stone), but also leaves a matte finish.

The after photos show the result of the restoration – I job well done if I say so myself. And certainly, my customer agreed!
Add a comment...

Post has attachment
http://south-buckinghamshire.tiledoctor.biz/recolouring-stained-grout-in-milton-keynes-office-toilet/

Recolouring Stained Grout in Milton Keynes Office Toilet

Although much of the work Tile Doctor does is residential were more than happy to take on commercial tile cleaning jobs, as well. In fact, many office buildings contain very nice tiled kitchens and bathrooms, but the cleaners who visit them daily are rarely have the right training and products to keep stone, tile and grout looking it’s best.

In some cases, a long period of time passes before the facilities manager or cleaning company reach out to seek help from companies like Tile Doctor and by this time the tiles can be a very bad way. With this in mind I received a call from an office manager in Milton Keynes who needed help to restore the appearance of the tile and grout in a Porcelain tiled toilet.

You can see from the photograph that the White floor grout had become stained and unsightly through use and a lack of adequate grout cleaning. The owner of the building had decided, in fact, that he wanted to change the grout to a dark colour but was concerned about the cost and time it would take to remove the original grout and applying new.

I suggested to him that we give the tile and grout a deep clean and then simply recolour the grout with a Tile Doctor Grout Colourant. Additionally, it’s a relatively quick process which could be done outside of office hours to minimise disruption. The customer was happy with this solution, so I we agreed a time for me to come back and carry out the work.

Cleaning and Grout Recolouring of a Porcelain Tiled Office Toilet
The restoration process began with a deep clean of the tiles using Tile Doctor Pro-Clean, which is a strong alkaline tile and grout cleaner. The product was applied to the tile and grout and then left to dwell for a short period before being worked in with a large scrubbing pad fitted to a rotary machine. Pro-Clean very reliably breaks down ingrained dirt and muck and can even be used to remove sealers in a concentrated form.

Next, I paid special attention to freshening up the stained grout lines. This was done using Tile Doctor Grout Clean-Up, an acidic product which is usually used to remove grout smears from the tile surface but in this case applied to etch the grout surface to ensure a stronger bond with the colourant.

The tile and grout was rinsed and then dried before I could continue with the final step of recolouring the grout lines to make them darker, as per the customer’s request. This was done using the Tile Doctor Grout Colourant in Grey, which is just one of ten colours available. Other options include White, Chocolate, Sandstone and Black.

The Grout Colourant serves not only to recolour and rejuvenate the grout lines but also adds a barrier over the grout sealing it in and protecting it from further staining.

I think you’ll agree, looking at the photo of the result below, that the toilet now looks much smarter and more professional. The customer was very happy with the outcome of the work and left me the following feedback on the Tile Doctor feedback system.

"Great diligent work undertaken by Andrew-very pleased with the outcome.
Mr. Hirani, Milton Keynes 03 February 2018"
Add a comment...

Post has attachment
http://north-buckinghamshire.tiledoctor.biz/terracotta-tiled-floor-refurbished-in-amersham-council-building/

Terracotta Tiled Floor Refurbished in Amersham Council Building

A local cleaning contractor called us in to work on the Terracotta tiled floors at a council building in Amersham. The Terracotta had not been deep cleaned and resealed for about ten years and the sealer had worn off leaving the tile vulnerable to dirt becoming ingrained in the pores of the tile. The grout had also suffered the same fate and had almost gone black in many areas.

This is a common problem with Terracotta which is quite porous and once those pores become ingrained with dirt the tile becomes difficult to clean effectively. The solution is to seal the tile however sealers wear off over time and this was basically the problem.

After discussing the issues we agreed on a plan of action to deep clean the Terracotta tile and grout and then re-seal to protect it. Due to the busy nature of the building we agreed to do the work between Christmas and New Year when we knew the building would be empty.

Cleaning Old Terracotta Floor Tiles
We started by applying a strong dilution of Tile Doctor Oxy-Gel which is a strong tile cleaning product that being in a gel form ensures it sits on the tile for longer, giving it a longer effective dwell time so it can really eat into and loose the dirt. After approximately twenty minutes the gel was scrubbed into the tile with a black scrubbing pad fitted to a rotary machine. This broke down most of the dirt and removed any remaining sealer. Once the whole floor had been treated in this manner it was rinsed thoroughly with water which was then extracted using a wet vacuum.

With the soiled cleaning solution removed I could see the next step would be to spot clean stubborn staining and clean the grout. For this task I used a strong dilution of Tile Doctor Pro-Clean scrubbing it in by hand using stiff brushes and aided with a hand-held steamer to help treat the stubborn staining. Once done the floor was given a final rinse and then as much moisture as possible removed with the wet vacuum.

Sealing Old Terracotta Floor Tiles
We then left the floor to dry off completely and came back a couple of days later to seal the Terracotta tile.

I mentioned earlier that Terracotta is porous; in fact it’s probably the most porous material I deal with, so to fully seal the floor I had to apply eight coats of Tile Doctor Seal and Go which will provide complete and long lasting protection against staining and dirt. Seal and Go also adds an appealing satin sheen to the tile and the new seal will make it much easier to clean in future.

The floor tile and grout now look much healthier and I’m sure the council will be very impressed when they go back to work after the holidays.

Happy New Year…
Add a comment...

Post has attachment
http://north-buckinghamshire.tiledoctor.biz/

Restoring a Poorly Sealed Slate Kitchen Tiled Floor in Milton Keynes

Sealing is a fundamental part of any stone floor installation. If your builder or tiler hasn’t sealed your floor, he’s done something wrong – and it can cause significant problems. To the untrained eye, it may be difficult to tell whether a floor has been sealed, but you will quickly see that an unsealed floor attracts a lot of ingrained dirt and loses its lustre easily over time.

This was a problem for one of my recent customers, who lives in Milton Keynes in Buckinghamshire. They have a Slate tiled Kitchen floor which had been laid approximately 5 years prior, but had not been sealed properly on installation – and had not received any professional treatment since.

Consequently, the floor had become difficult for the customer to keep clean and it had lost its lustre and coloration due to ingrained dirt. Additionally, recent building works had left thick deposits of plaster on the tiles.

Cleaning a Dirty Slate Tiled Kitchen

To begin restoring the Slate tiles, I applied Tile Doctor Pro-Clean, which is a powerful alkaline-based cleaner for natural stone. I mixed a strong dilution of the product, spread it liberally across the area and left it to dwell for 20 minutes to seep into the pores of the stone.

Next, I scrubbed it into the stone using a brush fitted to a heavy weight rotary machine, before rinsing the floor with a high-pressure water and wet extraction unit.

The next stage of the cleaning process was to get rid of the plaster deposits and some of the heavier stains. To deal with these I needed to apply an even stronger cleaner, known as NanoTech HBU (Heavy Build-Up Remover).

As its name suggests, the product uses nano-sized cleaning particles to penetrate beneath difficult stains to dissolve them and lift them out. I did this in combination with a steamer to help loosen up some of the plaster.

Sealing a Slate Tiled Kitchen

After allowing the floor to dry overnight, I returned to the property the next day to seal the tiles. I did this using five coats of Tile Doctor Seal and Go, which is a double-action sealer: not only does it provide a robust, topical seal, it also provides a durable low-sheen finish which is aesthetically pleasing.

The sealer has done a fantastic job of emphasising all the natural colours in the Slate and the appearance of the entire floor has been lifted. The customer was really pleased with the restoration which certainly had been a long time coming.
Add a comment...

Post has attachment
http://north-buckinghamshire.tiledoctor.biz/

Restoring a Poorly Sealed Slate Kitchen Tiled Floor in Milton Keynes

Sealing is a fundamental part of any stone floor installation. If your builder or tiler hasn’t sealed your floor, he’s done something wrong – and it can cause significant problems. To the untrained eye, it may be difficult to tell whether a floor has been sealed, but you will quickly see that an unsealed floor attracts a lot of ingrained dirt and loses its lustre easily over time.

This was a problem for one of my recent customers, who lives in Milton Keynes in Buckinghamshire. They have a Slate tiled Kitchen floor which had been laid approximately 5 years prior, but had not been sealed properly on installation – and had not received any professional treatment since.

Consequently, the floor had become difficult for the customer to keep clean and it had lost its lustre and coloration due to ingrained dirt. Additionally, recent building works had left thick deposits of plaster on the tiles.

Post has attachment
http://north-buckinghamshire.tiledoctor.biz/

Porcelain Tiled Kitchen and Hallway Refresh in Leighton Buzzard

This Porcelain tiled floor had been laid in the hallway and kitchen of a house in Leighton Buzzard five to six years earlier. During that time the floor had become very dirty and the grout was discoloured to the point where it had turned black and no matter how hard the customer tried they were unable to get the grout clean.

On my initial visit to the property we discussed the options with the customer and decided that the best thing to do would be to thoroughly clean the grout and then seal it with grout colorant saving a messy and costly replacement of the grout.

Cleaning Porcelain Tiles and Grout

To get the porcelain tiles clean and deal with the worst of the grout I treated the floor with a strong dilution of Tile Doctor Pro-Clean. The product was mopped onto the floor and then left to dwell for 20 minutes. It was then scrubbed into the tiles with a black pad fitted to a rotary machine running on a slow speed. I also ran a stiff grout brush along the grout lines to get the grout as clean as possible.

The floor was then rinsed with water under high pressure and the slurry extracted using a wet vacuum. As we were grout colouring later I gave the grout a further scrub using Grout Colourant Pre-Treater which ensures a better bond between the grout and the colourant, this was then rinsed off with more water and also extracted using the wet vacuum.

Re-Colouring Grout

Once the grout was dry I started applying the Grout Colourant in a colour that best matched the original grout and colour of the tile. The process is quite straight forward and involves using a small brush to carefully apply the colorant along each grout line. When I was finished, I made sure to clean any excess product off the tiles before it had time to dry.

My photographs probably don’t do the floor justice but hopefully you can appreciate how the grout is now uniform in colour and with the protection of the grout colourant which forms a barrier over the grout it will stay that way for a long time to come.
Add a comment...
Wait while more posts are being loaded