Profile cover photo
Profile photo
Trevor Preece
11 followers
11 followers
About
Posts

Post has attachment
http://staffordshire.tiledoctor.biz/travertine-kitchen-floor-polished-in-stoke-on-trent/

Travertine Kitchen Floor Polished in Stoke on Trent

The pictures below are from a Travertine tiled Kitchen floor I was asked to clean recently at a house in Stoke on Trent. The floor was laid about five years ago and always had a matt appearance and never had a shine at all. I went over to look at the floor and was able to use a spare tile they had to show them how shiny I could get the stone. They were really impressed with the result and could now see the potential of their floor, so they booked me in straight away.

Cleaning and Polishing Travertine Tiled Floor
Restoring the shine on a polished stone such as Travertine, Limestone or Marble requires the surface to be stripped back and then buffed, which we did by using a set of burnishing pads. These diamond encrusted pads come in different grades from 400 through to 3000 grit and each one does a different job from scrubbing to polishing. I started with the course red 400 grit pad together with a little water to help lubricate and then carried on with the medium Blue 800, then fine Yellow 1500 grit pad, then very fine Green 3000 grit burnishing pads.

My last task for the day was to give the floor a good rinse to remove any remaining soil and then dried the floor as much as possible using a wet vacuum before leaving the floor to dry off overnight.

Sealing Travertine Tile
On our return the next I applied a single coat of Tile Doctor Colour Grow which is a specially designed stone sealer that brings out the deep colour of the stone. Once this had dried I worked in Tile Doctor Shine powder with a buffing pad to give a really deep and durable finish.

Before leaving I finished the floor off by spray burnishing the floor with an ultra high speed burnishing machine fitted with a white buffing pad.

For the first time in five years the Travertine floor has a deep shine and my customer was really pleased with the outcome.
Add a comment...

Post has attachment
http://staffordshire.tiledoctor.biz/laminate-covered-victorian-tiled-hallway-restoration-in-stafford/

Laminate Covered Victorian Tiled Hallway Restoration in Stafford

The photographs below are of a Victorian Tiled Hallway I recently restored in Stafford. This lovely floor was discovered underneath laminate flooring I can only assume because a previous owner of the house couldn’t work out how to restore it as it was in a terrible state and decided to cover it up.

Fortunately thanks to the power of the internet the current owner discovered Tile Doctor on-line and called us in to have a look with the aim of restoring the floor as a period feature.

Restoring a Victorian Tiled Hallway
Laminate is laid as a floating floor so unlike vinyl or carpet coverings that I usually deal with the laminate had if anything protected what was essential a very dirty Victorian tiled floor that was stained with adhesive and paint splashes.

With the laminate flooring already removed by the owner my preparation consisted of adding protection to the wooden paintwork. Once done I started to tackle the dirt by applying a strong dilution of Tile Doctor Pro-Clean and leaving it to soak into the tile and grout for about fifteen minutes. Then with a rotary machine fitted with a black scrubbing pad and running at slow speed I set about scrubbing the floor to get as much ingrained dirt out of pores of the Victorian floor tiles as possible. Once that was done I rinsed off the now soiled cleaning solution with water and then extracted it with a wet vacuum.

This action made a huge difference to the tile and grout, but the paint and adhesive stains were more difficult to remove so these areas were treated with Tile Doctor Remove and Go assisted with a steamer to help draw the staining out.

With the tile ad grout now clean of dirt and stains I gave the floor a rinse with water to remove any trace of cleaning products and then extracted as much moisture from as possible using the wet vacuum. I then left for the day allowing the floor to dry off fully overnight.

Sealing Victorian floor Tiles
The next day I confirmed the floor had dried off and then proceeded to apply five coats of Tile Doctor Seal & Go Extra which is a fully breathable sealer that adds a lovely shine to the tiles. I used a fully breathable sealer as these old houses were built before the invention of the damp proof course and I wanted to ensure that any moisture could rise through the floor and evaporate unhindered.

The final photograph shows the huge transformation I achieved with the floor and as you can imagine my customer was very happy with the result.
Add a comment...

Post has attachment
http://staffordshire.tiledoctor.biz/cleaning-wood-effect-porcelain-tiles-after-building-works-in-lichfield/

Cleaning Wood Effect Porcelain Tiles after Building Works in Lichfield

This article comes from a recently renovated house in the medieval cathedral city of Lichfield which is North of the new M6 Toll road. My customer had recently brought a house there and was refurbishing it from top to bottom, unfortunately however by the time the refurb was finished the new wood effect Porcelain tiled floor in the kitchen and hallway had become very dull & dirty.

Acid Washing Wood Effect Porcelain Tile
The tiled were basically dirty with plaster dust and I suspected grout smears to I decided the quickest and most effective method to clean them up would be to give the whole floor an acid wash with Tile Doctor Grout Clean-up.

Tile Doctor Grout Clean–Up is specially designed for removing excess grout as well as dealing with mineral salt problems so working in sections I applied the product to the floor and left to soak for five minutes before scrubbing into the tiles and then rinsing it off with cold water which was then removed with a wet vacuum. Some of the more stubborn areas had to be retreated and with a longer dwell time and more scrubbing but the process had the desired effect.

Once the whole floor was done I gave it a final rinse and used the wet vacuum to remove as much moisture from the floor as possible before leaving it to fully dry off overnight.

Sealing Wood Effect Porcelain Tile
There are a number of different types of Porcelain tile and most do not require a sealer however I had determined that this type was in fact the micro porous variety and would accept a sealer. If you’re having a new tiled floor laid it helps to keep some unused tiles back so you can test different sealers on them before applying the sealer to the actual floor. In this case three coats of Tile Doctor Seal and Go were applied and this worked very well as you can see from the photographs below.

The customer said it looked better than it did when it was first laid so was very happy.
Add a comment...

Post has attachment
http://staffordshire.tiledoctor.biz/stains-removed-from-limestone-tiled-kitchen-floor-in-tutbury/

Stains Removed from Limestone Tiled Kitchen Floor in Tutbury

First of all apologies for the quality of the photographs on this page, I clearly need to work on my photography skills. Normally photographs like these wouldn’t make the website site however they did capture the stain quite well so I thought they would be worth including. The customer who lives at a large house near Tutbury had a spillage on the lovely Limestone floor tiles in her kitchen which she tried to clean with different chemicals including bleach which just made the problem worse.

The trouble with bleach is it’s a strong acid which will eat through the sealer on your stone tiles, which in this case resulted in whitish circles you can see in the middle of the photograph below.

The tiles were overdue a deep clean anyway so the owner called me in to renovate the floor and hopefully remove the staining.

Removing Staining from Limestone Tiled Floor
I started the process by giving the floor an initial clean with Tile Doctor Pro-Clean which is a strong alkaline tile cleaning product. This wouldn’t address the staining problem but my intention was to get the grout clean and also remove any surface dirt and grit from the floor. The cleaning solution was scrubbed in and then rinsed off with water which was then extracted using a wet vacuum.

The best method for restoring the appearance of Limestone floor tiles requires stripping back the surface of the tile and then building back the polish of the stone using a process we call burnishing. To do this we use a set of diamond encrusted pads which come in different grades from coarse to very fine. The pads are applied using a floor buffer machine and each pad does a different job and you start with the course red pad together with a little water and then carry on with the white, then yellow pad again using a little water removing the soiled water along the way.

Although the floor now looked great the bleach had done more damage than first anticipated and had stripped the stone of its natural oils where the spillage had been. To rectify this I applied Tile Doctor Stone Oil to the floor which I’m happy to say resolved the problem.

Sealing Limestone Tiles
Once the Stone Oil has soaked in I followed up with the application of Tile Doctor Colour Grow which is a specially designed stone sealer that penetrates into the pores of the stone protecting it from within whilst enhancing the deep natural colours in the stone. The floor was then left for about one hour to dry before working in Tile Doctor Shine powder with a white buffing pad to give a really deep robust finish.

The floor was transformed after I had finished and before leaving I made sure to advise the owner on the correct way to maintain her floor in future.
Add a comment...

Post has attachment

Post has attachment

Post has attachment

Post has attachment
Add a comment...

Post has attachment

Post has attachment
Wait while more posts are being loaded