Profile cover photo
Profile photo
KROHNE Group
177 followers -
Learn more about our products and services and get the latest news.
Learn more about our products and services and get the latest news.

177 followers
About
Posts

Post has attachment

Post has attachment
Our new level exhibition model OPTIWAVE 6300 C - nice, isn't it?
More detailed information:
http://krohne.com/en/products/level-measurement/non-contact-level-meters/optiwave-6300-c/

#levelmeasurement   #levelmeter   #FMCW  
Photo
Add a comment...

Post has attachment
Do you already know our highlight brochure for the OPTITEMP smart compact sensors? The right solution for the temperature measurement in gases and liquids, in pipes and tanks at medium pressure and flow.
http://www.krohne-downloadcenter.com/dlc/CA_OPTITEMP_Compact_sensors_en_140416.pdf
Photo
Add a comment...

Post has attachment
All highlights of our battery powered electromagnetic water meter WATERFLUX at a glance.

#WATERFLUX   #electromagnetic   #watermeter   #KROHNE   #waterindustry  
Photo
Add a comment...

Post has attachment
Have you already heard about our new accessory OPTICHECK?
The OPTICHECK is the essential on-site verification tool for making sure that your installed electromagnetic flowmeters are performing to specification.
Learn more: http://krohne.com/en/products/flow-measurement/electromagnetic-flowmeters/accessories/opticheck/

#KROHNE   #electromagnetic   #flowmeter  
Add a comment...

Post has attachment
OPTIQUAD-based automation solution wins “Best Practice Process" award
​KROHNE customer fabrelac is a cheese-producer based in Bree, Belgium. fabrelac looked for a solution to monitor the quality of the raw milk. Variations in the composition are a constant challenge for anyone working with natural products such as milk, which has large fluctuations in the levels of fats and proteins. To gain an advanced form of process control, fabrelac was looking for an inline and continuous measuring solution to monitor and control the product composition throughout the whole dairy.

fabrelac decided to equip their production streams with KROHNE's inline analysis system: in total, fabrelac now uses 10 OPTIQUAD-M systems to monitor and control the product composition and one OPTIQUAD-WW 4050 W to measure the Chemical Oxygen Demand (COD) of the waste water.

By using the inline analyzers, the company manages to maintain a high product quality and constant composition, documented through all process stages, while increasing automation level.

#OPTIQUAD   #analytics   #fabrelac   #milk   #dairy  

http://industrie-technisch-management.knack.be/itm/nieuws/fabrelac-wint-best-practice-in-process-met-inline-analyse-met-video/article-4000625311822.htm
Add a comment...

Have you already completed our new eLearning course on the topic of "Electromagnetic flowmeters"? Find more information in our press release!
http://krohne.com/en/newsdetail/article/new-elearning-course-electromagnetic-flowmeters-418/
Add a comment...

Post has attachment
Did you know? The new OPTISYS SLM 2100 is more than a sludge level meter!
The direct measurement by immersion of the optical suspended solid sensor in combination with the 3 measuring modes (level, profile and zone tracking) gives you  more information about the sedimentation process compared to ultrasonic devices.
Learn more at:
http://krohne.com/en/products/analysis-instruments/sedimental-profile/optisys-slm-2100/
Add a comment...

Post has attachment
KROHNE INOR: 75 years of temperature measurement
Discover how KROHNE INOR became one of the largest manufacturers of industrial temperature measurement instruments.
Add a comment...

Post has attachment
Measuring instruments for Power- 2- Gas plants
The „saving of electrical power“ by Power- 2- Gas technologies makes continuous monitoring of hydrogen quantities necessary – from production right down to transport for supply or methanisation. Since hydrogen is extremely volatile and highly flammable, only measuring devices made of stainless steel and with special gaskets may be used. They must also have approval for Ex-areas.

Immediately following electrolysis, an initial measurement of the H2 produced is possible. Here the OPTISWIRL 4070 vortex flowmeter, which can also measure low-density hydrogen, may be used. As a cost-effective alternative or for redundant control measurement, the H250 M40 variable area fl owmeter may also be the right choice for low nominal sizes up to DN100. However, if greater accuracy and/or a bigger nominal size is required – even after compression – the OPTISONIC 7300 ultrasonic flowmeter with robust titanium signal converters may be a suitable choice. Alternatively, there is also the OPTIMASS 6400 mass flowmeter which, in addition to mass, can also measure the volumetric flow of hydrogen regardless of pressure and with a high degree of accuracy.

When transporting the hydrogen, PipePatrol ensures quick detection and exact localization of leaks. The leading leak detection system makes it possible to continually monitor the pipeline to guarantee the necessary safety when dealing with hydrogen.

#power2gas #hydrogen  
Photo
Add a comment...
Wait while more posts are being loaded