Profile cover photo
Profile photo
George Swatzbaugh
34 followers -
Carpentry contractor, licensed Pasco County Florida, Full 2 year warranty on all labor and we provide free in home estimates.
Carpentry contractor, licensed Pasco County Florida, Full 2 year warranty on all labor and we provide free in home estimates.

34 followers
About
Posts

Post has attachment


Being A Contractor
Featured by Pasco Remodel

I hope everyone enjoyed their Independence Day Holiday. We enjoyed a few days off and got to catch up with friends and family. While coming back from the holiday we had a few appointments and it amazes me still how some people think they are a contractor. I wanted to share this blog with you. So lets begin.

While doing estimates in the Lutz and Land O Lakes, Florida area a few clients had called previous people for estimates. Some were we can start tomorrow. Some told my clients sure I can take that for you and then show up and the ladder does not reach the window. Come to find out these are just jobbers being recommended on social media. This actually makes me mad. We have companies out there that are completly legit and then the ones who operate sneaky. Who is going to select a contractor that does not have correct references, license, insurances, and most of all proper tools. If saving a few dollars is one thing but is that jobber or handyman going to be there when stuff fails that they did. NO! They will address it once, maybe then ignore you, run, hide, change their number or worst leave the state. Now you the consumer are stuck with a messed up job, out of money and hurt. a

The reason for this blog is 2 of our clients almost got scammed. We get it save some money but when you have a small bathroom remodel and the handyman or jobber says we can start tomorrow. I would run. This also concerned our client.

So, to all our followers and future clients make sure you ask the proper questions.

Do you have pictures and references of your work?
How long in the trades?
What is your schedule like?
Do you have insurance and license and can you provide a copy? (this stops the handyman rip offs!)
And lastly, what type of warranty do you provide? (by law 1 year. PHRR we provide 2 years)

So in closing do not get hoods-winked by people that think they are a contractor. Instead go with one that can properly answer the 5 basic questions to any client.

Remember, at Pasco Home Remodeling & Repair, we provide all types of home remodeling, repair, and renovation in the Zephyrhills, Holiday, Dade City and Wesley Chapel Florida areas all the time. For more info, contact us at 352-322-2700 or http://www.pascoremodel.com

Thank You.


Drain Odors
Featured by Pasco Remodel

First I want to say yes its been awhile since our last blog. The past few months have been crazy with work, but that’s good. So I promise we will be blogging again as we have before. This weeks blog is about drain odors. Now you maybe thinking what? So with out further ado lets begin.

Ever walk into a home after coming back from vacation and smell like bad egg smell or musty odor. Ok, now what about if you just getting home from work and smell the same. Now lets add one more scenario to the equation. What about little flies in the drain. So below are going to be some tips and also what maybe causing it. This will apply either on septic or sewer type drains. The only difference is when placing cleaning agents you have to use a septic type cleaner.

Whether you leave for a week or so or you go to work and you come home and smell that drain smell we are all talking about its probably being caused by a few things. If you come home from work and been smelling it by chance you have food in the drain or downstream and partial blockage. This happens and really no alarm. Also this is a sign of what could be a back-up in the drain soon to happen. {Yes, just like our bodies our homes gives us symptoms too} So an easy fix is to get some hot water and citrus type cleaner. If you have a garbage disposal these things always get food under the turntable and will cause the smell too. So run for a good 10 minutes in each drain hot water with the cleaner. If you are on septic an approved type of drain sanitizer as well.

To explain a bit more what happens is that the drain walls collect food particles and stick to the sidewalls of the pipe. So this will produce that smell. Our piping just does that and it needs to be cleaned every so often. Now if you are getting flies, this usually comes from the septic system. Its good to place a drain cleaner approved for septic tanks. Also there maybe small food particles in the trap. Every 6 months its a good idea to remove them and clean them as well. (talking from experience)

Now as far as the smell from vacation cause the house being shut up for a week. Prior to leaving its a good idea to run hot water with a cleaner down the drain for 10 minutes. Then after the last use, some type of citrus type cleaner will help reduce the smell. The cleaner will be in the traps where the actual smell comes from. Then upon returning just flush the drains for a few minutes and poof no more smell.

I hope this little tip helps. And from #PascoRemodel we would like to wish everyone a Happy and Safe 4th of July Holiday. Thank you all again for your support.

Post has attachment

Post has attachment

Attic and Insulation
Featured by Pasco Remodel

We are writing this blog about a way to save you money on your heating and cooling bills. When we think of our attics we think about storage and maybe the unknown area of the home. But the attic is really a place for the house to breathe. So lets begin.

Back in the early days the attics were sealed off. The soffit was plywood and you had small vents to control. The area was just there. Then later on, as building technology came upon us, the attics were becoming a storage area. Some were becoming more additional rooms. But this was not helping with the transfer of heat or cool. In your attic, a lot of builders are using blown insulation instead of the traditional rolled insulation. Now, both will give you the same R value, but which is better.

insulation-diagram_summer1.png

The rolled type of insulation is your traditional kind and you can usually finish the attic with. The blown type to obtain the same R value you will need higher thickness, like 9″ of insulation through out the attic. Additionally the insulation has to stay pliable. Meaning you can not walk on it. Nor store items on top of it. The advantage of the blown type, it is a bit more economical then the rolled. (I prefer the rolled type as to finish off the attic.)

Now, lets talk about the remainder part of the attic. You have a ridge vent, maybe gable vents and your eaves. Its important to make sure that the vents are not clogged. Additionally, if you have a power vent or cyclone make sure the area is not full of debris. The other vents are important to allow the air flow from ground up. And yes it is normal for the attic to be over a 100 degrees in summer but allowing the other vents to be open it will help cool the home. Remember, you do not want to over insulate your home either. This will cause condensation and possible failure of other elements in the home.

Lastly, the insulation you choose, should be environmental friendly and I recommend that a pest deterrent be applied or is added to the insulation. Varmints will try to get in the attic someway and the insulation with the deterrent will help keep them out.

And we at Pasco Home Remodeling & Repair, are starting this new service for Zephyrhills, Holiday, Land O Lakes and Lutz Florida. For more information feel free to call us at 352-437-5300. Or look us up on the web at www.pascoremodel.com Thank You.
Photo

I write two blogs. Can I post them here? One is about home inspection and the other is home improvement

Post has attachment
Permits


As we are now into the new year, I hope everyone had a great holiday season. This weeks blog is about Permits. Not about home inspectors needing permits, however home inspectors searching for permits on the property they are inspecting. So, lets begin.

Just about every scenario we do, we are always in contact with the local building departments for building permits. At the end of the year a repeat client of ours was purchasing another property. They wanted to know about any open permits since the home had been just recently renovated. So, in our search we found 2 open permits. Which brings us to this blog.

The work for the permits had been performed correctly. The building department was in error because they did not close the permit. It happens. Now what about other scenarios. For example, there maybe new electrical panel box and no permit. This is always noted on our reports. Or new garage door and opener but no permit. This happens too. So why permits?

A permit is to protect the home owner and government. For example, if the current home owner applies for a permit for finishing a garage area then their is multiple trades involved. Additionally, it protects government because they have a record on the property. If there is ever a bad error then the work can be pointed back to the contractor on record or the building department. Also, if no permit then their maybe repercussions when closing and a property appraiser sees new work that was not properly recorded. The worst case scenario is a home is about to close and no permit was applied for upgrades and the county records office catches that a new kitchen was installed prior to closing. This will definitely raise a red flag.

So, when you are about to purchase a property or change insurance companies and need an insurance inspection, ask your inspector about permits. It is easy to obtain and we provide this service at no cost to our clients. For more information contact us anytime at 352-322-2700 or www.emeraldinspectionservice.com Our inspections usually range from Clearwater to Odessa and from Zephyrhills to Hudson Florida areas.

Post has shared content
The next drywall task you do whether its a small job or a complete remodel, make sure the room is comfy Source: Drywall Finishing

Post has attachment
DRYWALL FINISHING

Ever wonder why drywall compound takes longer to dry when other times it will dry quicker. This weeks blog is about finishing drywall to a paint-able finish. So, lets begin.

When drywall installers install drywall its important that the drywall is installed correctly. For example, you have finished edges from the factory that are beveled. You want the drywall to be perpendicular across the framing for more rigidness. And you want the drywall to be nailed or screwed every stud and every 12" on the stud for ceiling joist. What you do not want is the drywall to be placed and not really tight as this will cause cracking in the compound and not adhere correctly.

When the finishers are applying the compound, they may use different types of drywall tape for the best application. For instance, if it is against the drywall that is existing, then you will have a cut edge and its best to use mesh drywall tape instead of paper tape. In the corners you will have papertape to cover the corner. There are other drywall finishing instruments as well depending upon the type of job but lets stick with these 2 for now. When finishing drywall its important that the edges meet up and are as flat as possible. In union school, I was taught, factory to factory and cut to cut edges. This usually applies to most applications. In remodeling most of the time.

Most of the times the drywall finisher will apply the tape and a good first coat to cover the tape. Most drywall finishing will need 2-3 coats depending upon the application. In some cases matching up to existing plaster for a small repair, it may need 4 to really feather it out. But when finishing drywall the real trick is applying just enough so the compound can dry evenly and at a normal rate. Some will leave heat on to help or place heaters in the rooms. Some have used De-humidifiers, some use an instant compound you mix on site. This is all great, but if the wall or ceiling temperatures are not at at least approximately 65-70 degrees then the drying times will be longer. I always recommend to keep the room at a comfortable range so that the drywall compound can dry smoothly. Adding extra heat or keeping the ac on can cause cracking and bubbling sometimes and will delay the process. And yes doing ceilings against the attic the compound may dry quicker due to the heat in the attic.

So in closing, the next drywall task you do whether its a small job or a complete remodel, make sure the room is comfy. Not too cold and not too hot. Make sure the finisher has experience in feathering joints. Ask them when they use a 6 inch knife compared to a 10 or 12 inch knife. And lastly, if you see big hunks of compound applied and its going to take a belt sander to finish stop them. The problems will arrise later on as the seasons change. Sometimes drywall joints will crack when the home is acclimated over time. To learn more, go to www.pascoremodel.com or call us at 352-322-2700. Thank You.







PhotoPhotoPhoto
12/12/16
3 Photos - View album

Post has attachment
We now offer contractor financing with PayPal!
Add a comment...
Wait while more posts are being loaded