Profile cover photo
Profile photo
Liside Li
1 follower -
We are specialized in all kinds of flame retardants for textiles and plastics.
We are specialized in all kinds of flame retardants for textiles and plastics.

1 follower
About
Posts

Post has attachment
Add a comment...

Post has attachment
Introduction:
LFR-8012 is an organic zinc salt flame retardant containing phosphorus. It is a white powder with high temperature resistance and has non-migration. It melts during process, which improves melt blending with polymer and will not block spinneret. Because of this, it is especially suitable for halogen-free flame retardancy of PET fiber and PET thin film systems, and good compatibility with matrix resin. It can also be applied to injection moulding of PBT and PET. Providing excellent flame retardant efficiency can be reached with synergistic nitrogenous flame retardants.
Specifications:
Item Unit Standards
P content %(w/w) 20-21%
Density g/cm3 1.40
Bulk density g/cm3 0.30-0.60
Moisture %(w/w) <0.2
Initial decomposition temperature ℃ >350
Average particle size(D50) μm <40
Applications:
LFR-8012 can be applied in polyester chips, filament, short fiber, thin film and permanent flame retardant polyester products. Polyesters with LFR-8012 have good performance in terms of color, spinnability, fiber strength and chromaticity. It is particularly suitable for spinning process through any spinning system. LFR-8012 has good thermal stability, with no irritant smell during spinning process. It can also improve antistatic property of polyester products. It is used in many application areas of conventional PET and PBT.
LFR-8012 has prominent flame retardant efficiency, especially to polyesters. It is widely used in injection molding and fibers. With dosage of LFR-8012 at 5~10%, the LOI above 30% can be achieved. For PBT, a dosage of 10-15% LFR-8012 together with 10-15% nitrogenous flame retardants such as MPP, MCA is usually sufficient to obtain UL94 V-0 (at 0.8 and 1.6mm thickness).
LFR-8012 melts at processing temperature above 200℃ and is miscible with the molten polyester.
Photo
Add a comment...

Post has attachment
LFR-8006 is one P&N synergistic flame retardant. It is a white powder with high temperature resistance and has non-migration. It is mainly applied to engineering plastics such as nylon 6 and PA66 (glass fiber reinforced and unreinforced) series and TPE (TPEE, TPU and PEBA).
Specifications:
Item Unit Standards
P content %(w/w) 19-20%
Density g/cm3 1.25
Bulk density g/cm3 0.40-0.60
Moisture %(w/w) <0.5
Initial decomposition temperature ℃ >350
Average particle size(D50) μm 30-40
Photo
Add a comment...

Post has attachment
Flame Retardants
Photo
Photo
2017/8/9
2 Photos - View album
Add a comment...

Do not make flame retardants be ‘exporting retardants’!!!
Recently, EU non-food rapid alert system sent out a warning alert to a kind of baby carrier made in China, because the fabric contained flame retardants ‘Phosphate ester (2 - ethyl chloride)’ and ‘Phosphate ester (2 - propyl chloride)’, which have potential carcinogenicity to children, and may cause acute poisoning. The products were forced to recall and withdrawn from the market.
Flame retardants are widely existed in the plastic products, electrical accessories, textiles, household items, and polyurethane foam toys. Flame retardants are mainly used to enhance products’ fireproof performance. But some kinds of flame retardants are harm to human’s body health and environmental protection. So limited use of poisonous and harmful flame retardants are more and more strict in Europe and America regions. At the meantime, trade barriers for environment protection are continuously upgrading, and disabled flame retardant list keeps increasing, which both force firms to use more eco-friendly and safety new materials. And product cost of certification testing will increase greatly, which is bound to bring certain impact to consumer products exporting enterprises in China.
Add a comment...

LISIDE achieved complete success in Chinacoat!
LISIDE attended Chinacoat from Nov 30th to Dec 2nd in Guangzhou, and achieved complete success!
During the time, LISIDE also held a banquet and invited customers to have dinner together, appreciating for customers’ long-term support to LISIDE.
In the Chinacoat, LISIDE introduced our main product ‘MP resin series’ (high performance with low VOC), and attracted a lot of customers from all over the world.
Besides, LISIDE also exhibited our eco-friendly phosphate and nitrogen flame retardant products, which mainly applied to all kinds of textiles and plastics, with good properties of ‘Halogen-free’, ‘High temperature resistance’, ‘Non-migration’, ‘Low dosage’, ‘Good flame retardant effect’, ‘Washing durability’, ‘Non-discolor’, etc.
Contact us for more details.
Add a comment...

LISIDE launches a new kind of eco-friendly flame retardant product, which mainly used for homopolymerized PP and copolymerized PP.
The flame retardant product is a new type of eco-friendly flame retardant specially designed for homopolymerized PP and copolymerized PP.
The product contains N, Br, P reactive ingredients and are effective at low dosage.
With the flame retardant, PP can be modified to meet halogen free (IEC 61249-2-21 standard). The product is widely used in extrusion and injection molding of PP.
UL94 V-2 (self-extinguishing without fire≤3s) can be met with low dosage.
Contact us for more details.
Add a comment...

Post has attachment
Fire-retarding agent for cotton fabrics LFR2002
Chemical name:3 methyol amino-3-oxygen propyl dimethyl phosphate
Molecular formula:C6H14NO5P
Chemical and physical properties:
The same product as Pyrovatex-LFR2002; colorless or light yellow thick liquid with a slight taste of hot pepper; an organic phosphate fire-retardant containing dual fire-retardant elements of P and N.
80% water solution; convenient for use; excellent fire retardant effect on textiles; durable in water; provides a smooth hand feel to the textile.
Characteristics:
Provides excellent fire-retardant performance to the cotton textiles
Fine durability in washing
Compatible with various post-finishing agents
Easy preparation of fire-retardant finishing liquid
Calendaring/baking/hot drying on resin processing machine, no additional equipment required
Content of solid substance
≥80
PH value
PH :6.0-6.
Mainly used in military uniforms, tents, curtains, decorating cloth, beddings as well as in metallurgy, fire protection, hydraulic power generation, nuclear industry, mining, etc.
Specifications:
1) Appearance: colorless or slightly yellow, highly viscous liquid
2) Solubility: miscible
3) pH (3% aqueous solution): 5 – 7
4) Solid content: 80%plusmn;2%
5) Density: 1.25±0.1
6) Viscosity at 25°C, Cps: 1,100 – 1,300
Photo
Add a comment...

Post has attachment
Flame Retardant LFR3001
Specification:
Chemical Composition:aqueous mixture based on phosphorus and nitrogen organic compounds
Appearance: clear or a little bit cloudy liquid
Density (20℃): about 1.2g/cm3
Solid content: about 50%
pH: 2.5 – 4.0
Solubility : miscible with the water
stability: 2 years in closed container (temperature: 0℃-40℃)
Properties:
No corrosion
No adverse effect on the strength of the fabric
Good thermal stability
Can be sued in adverse climatic condition
Compatible with different bonding agents combined (preliminary tests are necessary)
Normally no yellowing occur under high curing temperature ( up to 200 ℃ )
Usually Compatible with softener, water and oil repellent combined (preliminary tests are necessary)
Particularly well suitable for special, problematic material composition and fabric texture
Prolonged storage may cause turbidity, which does not influence the effects
Application:
LFR3001 is suitable for cellulose, polyester, wool, polypropylene and polyethylene fibers and their blends. End uses are automotive textiles, mattress ticking,building materials, curtains and drapes,and decorative fabrics.LFR3001 finishes are compatible with other treatments, such as coatings and oil- and water-repellent finishes
Typical application process
LFR3001 is added to the bath with water by stirring at room temperature. Curing temperature is between 60-180℃
The using amount of LFR3001 is depending on the fabric texture and absorbability, flammability requirement, other auxiliaries in the bath, etc.
Padding process
Cellulose 300-450g/L ( 10-14% dry add on fabric), pick up 70%100%
Wool thin 230-270g/L, thick 200-250g/L
8-12% dry on fabric
Auto decoration
Cellulose 200-300g/L
Synthetic preliminary tests are necessary
Dipping process (i.e. curtain)
300g/L-500g/L about60 70% liquid on fabric, avoid the lose of the working liquid.
Curing temperature: 100-130℃ (no more than 150℃)
Precaution:
LFR3001 might bring unexpected effect on the fabric ( i.e. color fastness, brightness, etc). Preliminary tests are necessary.
The above mentioned information is according to our own acknowledge and experience. It is advised to make lab trail and small batch trail before formal treatment to get optimum processing condition.
Attention:
The above mentioned information of the formulation is for reference only. The customer should adjust according to their own products. But any problem, do not hesitate to connect with us.
Photo
Add a comment...

Post has attachment
MP35
Physical Form:white powder
Rotational Viscosity:30mpa·s~40mpa·s
Chlorine Content:44%±1%
Apparent Density:0.35g/ml±0.05g/ml
Volatile:≤0.5%

Application:

MP35 is used for anti-corrosion paint (container, marine & industrial paint)
Properties:

Good anti-corrosion ability
abilityMP35 has good binding property as a result of its special molecular structure in which ester bond is resistance to hydrolysis and combined chlorine
atom is very stable. So MP35 can be used to produce high quality paints with good water resistance, salt resistance and chemical resistance.
Good stability
No reactive double bond, MP35 resin’ molecular don’t easily oxidized and degraded. The molecular are also with excellent light stability and don’t easily
turn yellow or atomized . The existence of ether bond gives the molecular good internal plasticization. So the resins are flexible enough and do not
require additional plasticizer. They also will not gradually cracking that caused by migration of plasticizer.
Good adhesion
MP35 contains copolymer of vinyl chloride ether, which ensure the paints good adhesion on various materials. Even on the surface of aluminum or zinc,
the paints still have good adhesion.
Good solubility
MP35 is soluble in aromatic and halohydrocarbon, esters, ketones, glycol, ester acetates and some glycol ethers.
Fireproof ability
MP35 contain chlorine atom, which gives the resins fireproof ability. With addition of other flame resistant pigment, filler and fire retardant, they
can be used in fire retardant paint for construction and other fields.
Safety

The normal precautions relating to handing chemicals and local regulations on industrial hygiene must be observed. The place of work must be well ventilated,
skin care measures should be adopted, and safety goggles should be worn.

Package and storage:

1. Packed in the kraft bag with PE liner. 20kgs/bag.
2. Avoid being crushed while storing and transferring. Stored away from heat and moisture.
Photo
Add a comment...
Wait while more posts are being loaded