Profile cover photo
Profile photo
Ajin Gopakumar
213 followers
213 followers
About
Posts

Post has attachment

Post has attachment
ROLSEN TELEVISION SERVICE MODES
ROLSEN TELEVISION SERVICE MODES   Note: Do not change the values of other
necessary parameters, this may lead to loss of the factory settings. To avoid
the loss of factory settings: Before changing the settings is better on a
piece of paper to write down al...

Post has attachment

Post has attachment
HITACHI L32VC04 - L37VC04 - L42VC04 Service mode and software update
HITACHI L 32 VC 04 - L 37 VC 04 - L 42 VC 04 SERVICE MENU SETTINGS In order to reach service menu, First Press “MENU” Then press the remote
control code, which is “4725”. In DTV mode, first press “MENU”
and select “TV SETUP”. Then, press “4725”. SOFTWARE UP...

Post has attachment

Post has attachment
SHARP LC-42XD1EA SERVIE MODE SOFWARE UPDATE AND FACTRORY RESET -CPWBX3520TPZ -PSU PSC10189D - QPWBFD604WJN4
SHARP LC- 42 XD 1 EA  ADJUSTMENT PROCEDURE The adjustment values are set to their optimum at the factory before shipping. If by any chance a value should become improper or a readjustment is required
due to part replacement, make an adjustment according to ...

Post has attachment

Post has attachment
Akai PF21GB300 service mode and adjustments
C AKAI  PF 21 GB 300  SERVICE MODE To enter the DESIGN/SERVICE mode Set the volume to 0. Then press and hold the MUTE button on the remote control,
and press the MENU button on the TV to enter the SERVICE mode . To exit from the
S mode, turn off the TV set ...

Post has attachment

Post has attachment
AKAI 21CTS92FS Service mode and adjustments
AKAI 21 CTS 92 FS  Adjustment method Main power +B setting Receive standard color pattern RF signal , set picture to “ Standard Mode” . Adjust VR501 , to get +B (VD631 -) voltage =110 V I2C
bus control adjustment methed: Enter and exit factory mode 1) For r...
Wait while more posts are being loaded