Profile cover photo
Profile photo
Martin Schmitz
290 followers -
Marketing Manager, Dozent und Trainer
Marketing Manager, Dozent und Trainer

290 followers
About
Posts

Post has attachment
Sommerputz geschafft! Endlich mal die eigene YouTube Playlist aktualisieren? Check!

#videomarketing   #contentmarketing  
Add a comment...

Post has shared content
Ich bin gespannt ;-)
Add a comment...

Post has attachment
Facebook greift mit "Services" voller Beisslust die etablierten Bewertungsplattformen an. Was zu tun ist, um vom neuen Dienst zu profitieren steht im Link.
Add a comment...

Post has shared content
Ein paar Minuten für dieses Video sollte man sich einmal nehmen...
Einige von Euch kennen das Video bestimmt schon - aber wer es noch nicht gesehen hat: do it!  Es erklärt wirklich anschaulich (und leicht zu verstehen), wie es zur Syrien-Krise kam, wieso die meisten Flüchtlinge Smartphones haben und warum so viele nach Europa fliehen... Vor allem räumt es aber mit Vorurteilen auf.... 
Add a comment...

Post has attachment
Was für ein Ohrwurm! #teishi #kcrw  
Add a comment...

Post has attachment
Du bist, was Du glaubst. Grund genug, sich einmal intensiver mit unseren Glaubenssätzen im beruflichen wie im privaten Alltag auseinanderzusetzen. An was glaubst Du?
Add a comment...

Post has shared content
NEW PRODUCT - Adafruit HUZZAH ESP8266 Breakout
https://www.adafruit.com/products/2471

Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don't have an onboard 250mA 3.3V regulator or level shifting, and aren't CE or FCC emitter certified....UNTIL NOW!

The Adafruit HUZZAH ESP8266 breakout is what we designed to make working with this chip super easy and a lot of fun. We took a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs. We added in:

 - Reset button,
 - User button that can also put the chip into bootloading mode,
 - Red LED you can blink,
 - Level shifting on the UART and reset pin,
 - 3.3V out, 250mA regulator,
 - Two diode-protected power inputs (one for a USB cable, another for a battery)

Two parallel, breadboard-friendly breakouts on either side give you access to:

 - 1 x Analog input (1.8V max)
 - 9 x GPIO (3.3V logic), which can also be used for I2C or SPI
 - 2 x UART pins
 - 2 x 3-12V power inputs, reset, enable, LDO-disable, 3.3V output

More information on the product page!

https://www.adafruit.com/products/2471
In stock and shipping now!
#newproducts   #huzzah   #boards   #breakoutboards   #iot   #internetofthings  
PhotoPhotoPhotoPhotoPhoto
2015-04-24
8 Photos - View album
Add a comment...

Post has attachment
Norkoreaner oder Amerikaner? Wer weiß das schon so genau ;-) #kabarett #usa #europa  
Add a comment...

Post has attachment
Urgs... #roofing #shanghai  
Add a comment...

Was vor uns liegt und was hinter uns liegt, sind Kleinigkeiten zu dem, was in uns liegt. (Henry David Thoreau)
Add a comment...
Wait while more posts are being loaded