Profile cover photo
Profile photo
Paul Wales
About
Posts

Post has attachment
http://monmouthshire.tiledoctor.biz/dirty-victorian-tiled-hallway-renovated-in-abergavenny/

Dirty Victorian Tiled Hallway Renovated in Abergavenny

This lovely Victorian tiled floor was located in the hallway of a beautiful house in Abergavenny which is an old Market Town that dates back to Roman times on the outskirts of the Brecon Beacons national park.

It has been sometime since it was last given a thorough clean and seal and was now in need of some TLC to give it a new lease of life and have a chance to take centre stage again. The floor was in excellent condition, but the old sealer had worn off in the high traffic areas and dirt had now penetrated the pores of the clay tiles making it difficult to maintain effectively.

Repairing and Cleaning Dirty Victorian Tiles
To get the tile and grout clean and remove what remained of the old sealer I applied a 50/50 mixture of Tile Doctor Pro-Clean combined with Remove and Go. This was further diluted with water and applied to the floor for ten minutes, so it could soak into the tile and get to work breaking down the old sealers and dirt. The solution was then worked into the tile and grout using a 17” black scrubbing pad fitted to a rotary buffer machine running on slow speed to reduce splashing. This process released the years of grime and dirt build up from the floor and a wet vacuum was used to extract the soil.

I gave the floor a rinse with water which was then removed using the wet vacuum and the floor inspected to ensure it was clean and that what was let of the old sealer was now removed. There were a few stubborn areas than needed attention, so the treatment was repeated until I was satisfied.

The floor was then given a thorough rinse to remove any trace of cleaning products and then dried with the wet vacuum to remove as much moisture as possible. It’s not wise to apply sealer when the floor is still damp so once I was done cleaning I left for the day so that is could dry off fully overnight.

Sealing Victorian Tiles
My first task upon returning to the property the next day was to check for any dampness. If you neglect to remove all excess moisture from the surface of the tiles before sealing it is more than likely going to cloud the sealer, rendering it less effective I’m protecting the stone against ingrained dirt and stains.

Once satisfied that the floor was completely dry I was able to complete the renovation by applying several coats of Tile Doctor Seal and Go which is a topical sealant that works really well on Victorian tiles and leaves a lovely satin finish that brings out the colours.

My customer was very pleased with the outcome and left the following comment on the Tile Doctor feedback system.

Paul was very professional and did a fantastic job with our Victorian tiled hallway. It looks so much better. I would definitely recommend Tile doctor to anyone needing cleaning or restoring of tiles.
Sarah T, Abergavenny
Add a comment...

Post has attachment
http://monmouthshire.tiledoctor.biz/beautiful-black-and-white-victorian-tiled-hallway-renovation-in-monmouth/

Beautiful Black and White Victorian Tiled Hallway Renovation in Monmouth

This beautiful black & white Victorian tiled hallway was recently discovered hidden under carpet at a house near Monmouth. As well as the years of grime that had become ingrained in the tile, the carpet had been secured with carpet grippers which had been fixed on top of the tiles and the owner was keen to recruit my help in its restoration.

It’s a lovely drive up through the Wye Valley from my base in Caldicot to the town of Monmouth which has a long history that goes back to the Roman times. In fact it’s famous for its “Monnow Bridge” which dates back to medieval times and is the only remaining stone gated bridge of its type left in Britain. Needles to say it has a strong mixture of architecture with many old houses built during Victorian times.

Cleaning an Original Victorian Tiled Hallway Floor

The first step in cleaning the floor was to prepare it for cleaning by carefully removing the old carpet grippers and adhesive deposits using a handheld scraper. This was followed by creating a mixture of two powerful cleaning products namely Tile Doctor Remove and Go and NanoTech HBU remover. Remove and Go is a coatings remover designed to strip off old sealers whilst NanoTech HBU is a powerful Heavy Build-Up Remover that uses tiny abrasive particles to clean up tile and stone.

The floor was smothered in the cleaning solution and it was allowed to soak into the tile for about twenty minutes before scrubbing it in. It was not an exceptionally large hallway so a lot of hand scrubbing was required to get the floor as clean as possible. The cleaning solution was rinsed off with water and then extracted using a wet vacuum or wet vac as my colleagues often refer to it.

To finish off the cleaning process I scrubbed a dilution of Tile Doctor Pro-Clean into the grout lines to get them as clean as possible and then gave the floor a final rinse. I need the floor to be dry before sealing so using the wet vac I extracted as much moisture from the floor as possible.

Sealing an Original Victorian Tiled Hallway Floor

I left the floor to dry completely overnight and returned the next day to finish the floor off with a few coats of sealer. On my arrival I started by taking a few reading with a damp meter to ensure the floor was ready to be sealed. Fortunately by efforts with the Wet Vac the night before had paid off and it confirmed the tiles were dry and ready to be sealed.

To do this, I used multiple coats of Tile Doctor Seal and Go which works really well on Victorian Tiles and adds a nice low sheen that brings them up nicely. Naturally the sealer not only improves the way they look it also makes them much easier to clean and will protect them against ingrained dirt and staining.

I think you will agree this old floor has been transformed and now has a new lease of life.
Add a comment...

Post has attachment
http://monmouthshire.tiledoctor.biz/dull-slate-tiles-rejuvenated-with-deep-cleaning-and-sealing-in-ross-on-wye/

Dull Slate Tiles Rejuvenated with Deep Cleaning and Sealing in Ross-on-Wye

Ross-on-Wye, an area located in South Hertfordshire and close to the Monmouthshire border in Wales, is known as the “birthplace of the British tourist industry” due to the Wye Valley’s picturesque river scenery, landscapes, and castles and abbeys. It is also known for the famous Ross and Monmouth Railway, which opened in 1873 and closed in 1959, and ran through the valley.

I visited an old cottage in the area to assist a customer with restoring a Slate tiled kitchen floor. Slate tiles are particularly popular because of their versatility and durability, and truly they can be an asset to any property if the sealer is maintained correctly. Slate tiles need to be sealed to prevent dirt penetrating the pores of the stone as ingrained dirt is difficult to remove and causes the stone to lose its appearance. In this case the floor had been laid around five years earlier and the sealer had worn off in places and was wearing very thin in others. As you would expect dirt had now become ingrained in the tile and the grout had also become stained in places. Overall this problem had left the floor looking very dull and unappealing, as you can see from the photograph below.

Cleaning a Dull Slate Tiled Floor

To begin the restoration, I applied Tile Doctor Remove and Go liberally across the floor to strip away any remaining old sealer that was likely to be ineffectual and not preventing dirt from becoming ingrained in the stone. Next, I applied our strong alkaline cleaner, known as Tile Doctor Pro Clean to tackle that ingrained dirt. This was left to dwell on the floor and then agitated using a 17-inch rotary machine fitted with a black scrubbing pad.

After cleaning the floor, I rinsed the tiles thoroughly with water and used a wet vacuum to clear the area of the resulting slurry. Following this I concentrated on cleaning the grout lines using Pro Clean in combination with a wire brush, before leaving the floor to dry out completely for the next couple of days.

Sealing a Slate Tiled Floor

Later in the week, I returned to the property to seal the floor. Before doing so, however, I needed to test the floor for damp issues, especially since this was an old property and was unlikely to have a damp proof membrane installed. Running these damp tests are very important because excess moisture can cloud the sealer and damage its performance.

Thankfully, there proved to be no issues, and the floor was fine to seal. I did this using eight coats of Tile Doctor Seal and Go, which is a water based product (so no smell) that provides a durable, satin finish, and is recommended for use on a variety of tiles, including Quarry, Victorian, Sandstone and Terracotta.

As you can see from the photo above, the restoration was transformative and really restored the lustre to this Slate tiled floor. Another satisfied customer!
Add a comment...

Post has attachment
Add a comment...

Post has attachment

Post has attachment

Post has attachment

Post has attachment
Add a comment...

Post has attachment

Post has attachment
Wait while more posts are being loaded