Profile

Cover photo
340 followers|10,963 views
AboutPostsPhotosYouTube

Stream

KICKER

commented on a video on YouTube.
Shared publicly  - 
 
Ok that was impressive!

KICKER

commented on a video on YouTube.
Shared publicly  - 
 
With three svc 4 ohm subs, if you run them all in parallel to the box terminal, then that terminal will read about 1.33 ohms.  You can run a wire from each positive on the speakers directly into the positive terminal on the box.  Then do the same with the negatives - a wire from each negative terminal running into the negative terminal on the box.  You are not going to get any current loss running thru the box terminal - just make sure you have good connections.  Unfortunately we are not going to be able to post a video very soon. 

KICKER

commented on a video on YouTube.
Shared publicly  - 
 
Hey Chris - we do have this video thatI believe will work for you.  Subwoofer Wiring: Two 4 ohm DVC Subs in Parallel.  This video is wiring 2 DVC 4 ohms in parallel down to a 1 ohm load to the amp.  Everything will be identical for you just you will be using DVC 2 ohm subs which will end up showing the amp a .5 ohm load.  Hope this helps!!!

KICKER

commented on a video on YouTube.
Shared publicly  - 
 
That is correct!

KICKER

commented on a video on YouTube.
Shared publicly  - 
 
Hey Craig - The PXi50.2 is only stable down to 2 ohms per stereo channel.  You can run a set of the PS5250 on one channel but the CVT651 is a 1 ohm speaker and it will be to low of an impedence for the 2nd channel. 

KICKER

commented on a video on YouTube.
Shared publicly  - 
 
Sorry for the delay!  You would be running that amp at 4 ohm stereo.  I checked out the specs on that amp and you would be running 200 watts to each voice coil. 
Have them in circles
340 people
Kenneth Bostic's profile photo
Luis Lizaolalino's profile photo
Vinnicius Andrade's profile photo
Jay P's profile photo
Allie Thtgrl's profile photo
crazyhorse Rafael's profile photo
Allen Stepherson's profile photo
Chase Preister's profile photo
Kevin Myers's profile photo

KICKER

commented on a video on YouTube.
Shared publicly  - 
 
This was just a quick preview flashing thru some of the previous Tour's cars.  If you click on our YouTube channel we have posted videos from the first days of the actual tour that launched Saturday.

KICKER

commented on a video on YouTube.
Shared publicly  - 
 
Please contact our Customer Service dept at support@kicker.com as they will have pricing and availabilty for any size L7 you are interested in. 

KICKER

commented on a video on YouTube.
Shared publicly  - 
 
Hey Dylan - I could not find the exact JL amp you had listed but if it is stable at 1 ohms mono then you will want to wire your 2 x 2 ohm subs in parallel and run them to that amp.  This will show the amp a 1 ohm load and the two subs will share the 1000 watts, so each one will see 500 watts RMS.  If you were to run the amp at 4 ohms mono then the amp will only push 400 watts to both subs and each will see only 200 watts each.  

KICKER

commented on a video on YouTube.
Shared publicly  - 
 
Looking forward to hearing what you think!

KICKER

commented on a video on YouTube.
Shared publicly  - 
 
Wish we had a good answer to give you but there are so many factors involved in SPL ratings including the box type, box volume, loading factor of the vehicle, etc that we are unable to give you a good estimate.  

KICKER

commented on a video on YouTube.
Shared publicly  - 
 
Glad it helped! 
People
Have them in circles
340 people
Kenneth Bostic's profile photo
Luis Lizaolalino's profile photo
Vinnicius Andrade's profile photo
Jay P's profile photo
Allie Thtgrl's profile photo
crazyhorse Rafael's profile photo
Allen Stepherson's profile photo
Chase Preister's profile photo
Kevin Myers's profile photo
Contact Information
Contact info
Phone
1-800-256-5425
Address
3100 North Husband Street Stillwater, Oklahoma
Story
Tagline
Providing high-performance audio since 1973!
Introduction
Music...it's deep in our roots. We live it, breathe it and make it KICK!

KICKER Performance Audio is cutting-edge – our concert-like acoustics and innovative design in mobile stereo systems put us on the map.  

We began in 1973 as a two-person operation, hand-building pro-sound speaker systems from a single-car garage. We soon became a player in the car-stereo scene, providing the world’s most recognizable bass with signature square subwoofers and vicious power amplifiers. 

KICKER mobile audio for cars, trucks and boats are sought worldwide, and now critically acclaimed Docking Systems, noise-isolation earbuds and comfortable headphones are shaking up what remains of the planet.
Links
YouTube