Profile cover photo
Profile photo
UnderCutAnchoringSystemOnLineOfferCentre
Undercut, Adhesive, Expansion, Anchor, Post-Installed, Fixture
Undercut, Adhesive, Expansion, Anchor, Post-Installed, Fixture
About
Posts

Post has attachment

Post has attachment

Post has attachment
Do you know what is Undercut Anchor? Why Undercut Anchor is Reliable and Safety?
Do you know why Adhesive Anchor and Expasion Anchor are dangerous?
Add a comment...

Post has attachment

Structure Design Knowledge

Adhesive Anchor Systems are permitted only for horizontal, vertical, or downwardly inclined installations. Overhead or upwardly inclined installations of Adhesive Anchors are prohibited. Do not use Adhesive Anchor Systems for installations with a combination of predominately sustained tension loads and lack of structural redundancy. Predominantly sustained tension loads are defined as load combinations where the permanent component of the factored tension load exceeds 30% of the factored tensile resistance.

Prohibition of Adhesive Anchoring Systems in Sustained Tensile-Load Applications

Adhesive anchors used to support sustained tensile-loading applications are prohibited from use on all new and ongoing Trunk Highway projects and State Aid projects. Local road authorities are encouraged to adopt similar guidelines. This policy and its instructions are effective immediately.

  #Concrete   #Anchor   #Design   #Adhesive   #Tensile   #Load     #Prohibition   #Undercut  
Add a comment...

Post has attachment
Under Cut Anchoring System Through Fastening Medium Duty Type Anchors

Figure: UCMT M8 × 59 / 30 MD

Ⅰ Products Features

Undercut anchor system realizes ideal anchor works that prevent anchor bolts from sliding or slipping off.
In order to deliver full performance of an anchor, use our Primary hole bit for making primary holes close to a perfect roundness.

⑴ Unique and special under cutter to fast and reliable undercutting
⑵ Accurate and simple confirmation device to check drilling depth and under cutting quality
⑶ Close spacing and small edge distance because of non-expansion forces
⑷ The resulting keying effect helps keep the anchor secure even in cracked concrete under dynamic loading
⑸ Combines the flexibility and immediate loading of a post-installed mechanical anchor with the performance of a cast-in-place headed stud
⑹ Through-Fastening Type (UCMT) provides exceptionally high shear loading capacity
⑺ Completely removable, if necessary and completely unremovable, it’s usually

Ⅱ Applications

⑴ Safety-relevant, heavy-duty fastenings for all dynamic loading (shock, seismic and fatigue) in cracked or uncracked concrete, including applications in nuclear power plants
⑵ Fastenings to support heavy pipes, safety barriers, industrial machines, crane rails, dorm structures, crash barriers, roof fixings, elevator tracks, bridge retrofitting etc.

Ⅲ Technical Data

⑴ Base Materials  Concrete (cracked), Concrete (uncracked)
⑵ Material Composition  Bolt: steel, strength 8.8 grade, sherardizing (min. 50 μm)
⑶ IBC Compliance  IBC 2003, IBC 2006, IBC 2009, IBC 2012
⑷ Type of Fixing  Through-Fastening
⑸ Environmental Conditions  Indoor, dry conditions
⑹ Head Configuration  Externally threaded
⑺ Installation Direction  All
⑻ Additional Product Information  Installation requires a specific pilot bit, under cutter, setting tool, and hammer per approval.

#Undercut #Anchor #Adhesive #Expansion #PreSetting #ThroughFastening #HeavyDuty #MediumDuty #LightDuty #PostInstalled #Architecture #Structure #SustainedTensileLoad #Tunnel #Horizontal #Vertical #Downwardly #Ceiling #Panel #Collapse #Overhead  #Upwardly #UCAS
Photo
Add a comment...

Post has attachment
Under Cut Anchoring System Pre Setting Medium Duty Type Anchors

Figure: UCMP M12 × 80 / 25 MD

Ⅰ Products Features

Undercut anchor system realizes ideal anchor works that prevent anchor bolts from sliding or slipping off.
In order to deliver full performance of an anchor, use our Primary hole bit for making primary holes close to a perfect roundness.
⑴ Unique and special under cutter to fast and reliable undercutting
⑵ Accurate and simple confirmation device to check drilling depth and under cutting quality
⑶ Close spacing and small edge distance because of non-expansion forces
⑷ The resulting keying effect helps keep the anchor secure even in cracked concrete under dynamic loading
⑸ Combines the flexibility and immediate loading of a post-installed mechanical anchor with the performance of a cast-in-place headed stud
⑹ Completely removable, if necessary and completely unremovable, it’s usually

Ⅱ Applications

⑴ Safety-relevant, heavy-duty fastenings for all dynamic loading (shock, seismic and fatigue) in cracked or uncracked concrete, including applications in nuclear power plants
⑵ Fastenings to support heavy pipes, safety barriers, industrial machines, crane rails, dorm structures, crash barriers, roof fixings, elevator tracks, bridge retrofitting etc.

Ⅲ Technical Data

⑴ Base Materials  Concrete (cracked), Concrete (uncracked)
⑵ Material Composition  Bolt: steel, strength 8.8 grade, sherardizing (min. 50 μm)
⑶ IBC Compliance  IBC 2003, IBC 2006, IBC 2009, IBC 2012
⑷ Type of Fixing  Pre-Settng
⑸ Environmental Conditions  Indoor, dry conditions
⑹ Head Configuration  Externally threaded
⑺ Installation Direction  All
⑻ Additional Product Information  Installation requires a specific pilot bit, under cutter, setting tool, and hammer per approval.

#Undercut #Anchor #Adhesive #Expansion #PreSetting #ThroughFastening #HeavyDuty #MediumDuty #LightDuty #PostInstalled #Architecture #Structure #SustainedTensileLoad #Tunnel #Horizontal #Vertical #Downwardly #Ceiling #Panel #Collapse #Overhead  #Upwardly #UCAS
Photo
Add a comment...

Post has attachment
Under Cut Anchoring System Through Fastening Light Duty Type Anchors

Figure: UCMT M10 × 60 / 20 LD

Ⅰ Products Features

Undercut anchor system realizes ideal anchor works that prevent anchor bolts from sliding or slipping off.
In order to deliver full performance of an anchor, use our Primary hole bit for making primary holes close to a perfect roundness.

The special UCAS advanced undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks.

⑴ Unique and special under cutter to fast and reliable undercutting
⑵ Accurate and simple confirmation device to check drilling depth and under cutting quality
⑶ Close spacing and small edge distance because of non-expansion forces
⑷ The resulting keying effect helps keep the anchor secure even in cracked concrete under dynamic loading
⑸  The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use.
⑸  The deltagon special bit and special under cutter allows for a fast installation by creating the undercut.
⑹  The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation.

Ⅱ Applications

Steel Constructions, Guard rails, Consoles, Step Irons, Ladders, Cable Conduits, Machines, Staircases, Gates, Facades.

Ⅲ Technical Data

⑴ Base Materials  Concrete (cracked), Concrete (uncracked)
⑵ Material Composition  Bolt: steel, strength 8.8 grade, sherardizing (min. 50 μm)
⑶ IBC Compliance  IBC 2003, IBC 2006, IBC 2009, IBC 2012
⑷ Type of Fixing  Pre-Setting
⑸ Environmental Conditions  Indoor, dry conditions
⑹ Head Configuration  Externally threaded
⑺ Installation Direction  All
⑻ Additional Product Information  Installation requires a specific pilot bit, under cutter, setting tool, and hammer per approval.

#Undercut #Anchor #Adhesive #Expansion #PreSetting #ThroughFastening #HeavyDuty #MediumDuty #LightDuty #PostInstalled #Architecture #Structure #SustainedTensileLoad #Tunnel #Horizontal #Vertical #Downwardly #Ceiling #Panel #Collapse #Overhead  #Upwardly #UCAS
Photo
Add a comment...

Post has attachment
Under Cut Anchoring System Pre Setting Light Duty Type Anchors

Figure: UCMP M10 × 60 / 25 LD

Ⅰ Products Features

Undercut anchor system realizes ideal anchor works that prevent anchor bolts from sliding or slipping off.
In order to deliver full performance of an anchor, use our Primary hole bit for making primary holes close to a perfect roundness.

The special UCAS advanced undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks.

⑴ Unique and special under cutter to fast and reliable undercutting
⑵ Accurate and simple confirmation device to check drilling depth and under cutting quality
⑶ Close spacing and small edge distance because of non-expansion forces
⑷ The resulting keying effect helps keep the anchor secure even in cracked concrete under dynamic loading
⑸  The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use.
⑸  The deltagon special bit and special under cutter allows for a fast installation by creating the undercut.
⑹  The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation.

Ⅱ Applications

Steel Constructions, Guard rails, Consoles, Step Irons, Ladders, Cable Conduits, Machines, Staircases, Gates, Facades.

Ⅲ Technical Data

⑴ Base Materials  Concrete (cracked), Concrete (uncracked)
⑵ Material Composition  Bolt: steel, strength 8.8 grade, sherardizing (min. 50 μm)
⑶ IBC Compliance  IBC 2003, IBC 2006, IBC 2009, IBC 2012
⑷ Type of Fixing  Pre-Setting
⑸ Environmental Conditions  Indoor, dry conditions
⑹ Head Configuration  Externally threaded
⑺ Installation Direction  All
⑻ Additional Product Information  Installation requires a specific pilot bit, under cutter, setting tool, and hammer per approval.

#Undercut #Anchor #Adhesive #Expansion #PreSetting #ThroughFastening #HeavyDuty #MediumDuty #LightDuty #PostInstalled #Architecture #Structure #SustainedTensileLoad #Tunnel #Horizontal #Vertical #Downwardly #Ceiling #Panel #Collapse #Overhead  #Upwardly #UCAS
Photo
Add a comment...
Wait while more posts are being loaded