Profile cover photo
Profile photo
Jim Weiler (OLD ACCOUNT)
(Vaelek) - Android developer, dabbler in everything!
(Vaelek) - Android developer, dabbler in everything!

Jim's posts

Post has shared content
Ohmaster is finally live in the Play store.. v1.2 was just published (may take a little bit to show up. Manual diameter entry and ribbon wire were added in this version)

- Standard ohm / volt / watt / amp calculator
- Unique variation feature. Find the ideal build configuration to reach your desired target.
- Wrap estimator.
  - Currently has Kanthal, Kanthal A1, Kanthal A1 Ribbon, Kanthal D, Nicrhome 60 and Nicrhome 80.
    Gauge from 24 to 34 for Kanthal A1, and 28-34 for the rest (will be expanding this as well)
    0.3mm x 0.1mm though 0.9mm x 0.1mm for ribbon wire
  - Coil diameter presets of 1/32, 3/64, 1/16, 5/64, 3/32, 1/8, 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm
  - Option to manually enter diameter in millimeters is found in the app settings
- Ohms per inch chart for all of the above wire types

To best utilize the variation feature, be sure to go into the app settings and define your minimum / maximum ranges for ohms, volts, watts and amps.

Features to come:
   - Juice mixing calculator and the ability to save recipes.
   - Ability to override ohm per inch values with your own as not all mfg's are created equal

#ecigs #ecigarettes #vaping #vapers  

Post has shared content
+Charter Communications subscribers, check your bill. They are pulling a fast one. Sales tax has always been included in the subscription rates. They have now decided to charge tax on the base rate that once included sales tax. They have admitted NO notice was provided to subscribers of this change. If you complain they will tell you the increase is due to government imposed sales tax. This is a blatant lie..
Charter and no one else has effectively increased their service rates and underhandedly disguised it as sales tax. 

+Charter Communications +Ripoff Report +Better Business Bureau 
+Federal Trade Commission  #CharterSucks   #Scam  

Post has shared content
Thank you in advance for anyone that chooses to contribute any amount to this fund. Every penny helps!

Jim and I have been trying for 5yrs this upcoming March to start our family. We have exhausted our limited fertility coverage on testing, and done numerous IUIs. Our next step is IVF. Please, help make our dream a reality.

Post has shared content

Post has shared content
Re-post from my wife's FB post:
"About 12.5yrs ago, my uncle went to work one morning. His heart stopped, and he was without oxygen for long enough to cause a brain injury. He was in a coma for awhile, and woke up on my 17th birthday. (Best gift ever.) Today, he still can't be left alone. My aunt, or another responsible adult, must be with him at all times. If this happened to you or a loved one, where would you turn? The Brain Injury Alliance of Wisconsin has been an amazing resource to my family, and I am proud to raise funds for them during the Walk for Thought. PLEASE consider donating. A dollar or two helps!"

Post has attachment
My new/active profile is +Jim Weiler 

Post has shared content
Quoting my wife's FB post:
"I WANT YOUR MONEY! I am doing the Walk for Thought with my uncle, Ron, a brain injury survivor. I am trying to raise funds for the Brain Injury Alliance of Wisconsin. They have been immensely helpful to my aunt and uncle in the years since his injury, providing them with many resources. Please donate below! Even a few bucks gets us closer to our goal, and allows the Alliance to continue helping!"

Choose Michele from the list if you wish to make a donation.

Post has shared content
Did you back this? No? You must enjoy the NSA all up in your business?..
43 hours left to fund this project.. It's close! But may not make it. If you are on the side of privacy, please consider pledging a few bucks.. And please share this far and wide in an effort to gain enough support to tip it over the edge in the final hours.

Post has shared content

Post has shared content
Sharing over here as well in hopes of finding an answer...
Does anyone out there work with WebKit.Net? I've been racking my brain over this, and I can't for the life of me manage to figure out how to access the WebkitBrowser.Document object to get to the DOM. Every example I've found for DOM manipulation points to that object, but it just doesn't seem to exist.  I'm trying to accomplish something similar to the answer provided at, but as I said, the #$%@#$ Document object just isn't there?? 

Thanks in advance to anyone who can shed some light on this!
Wait while more posts are being loaded