Profile cover photo
Profile photo
Bob Lamb
22 followers -
Australian Online Roller Shutters Price and Order On-line
Australian Online Roller Shutters Price and Order On-line

22 followers
About
Posts

Post has attachment
T35 Battery Replacement Motor T35 ODS Maximum Lifting Capacity of 52 kg
Domestic slat weight: 1sq mtr = 4 kg.
This motor will operate our complete range of Domestic roller shutters.
Commercial slat weight: 1sq mtr = 3.4 kg.
This motor will operate our complete range of Commercial roller shutters.
Cyclone slat weight: 1sq mtr = 6 kg.
This motor will operate our complete range of Cyclone roller shutters.
Security weight: 1sq mtr = 8 kg.
This motor can only be used up to 6.5 square meters with the Security roller shutters, if your require larger than 6.5 square you will require an electric motor.
The new T35 Battery Replacement Motor cost $250.00 each. $25.00 Postage & Handling
All roller shutter parts, pricing, and delivery cost, can be found at this link on our website:
http://rollershutters.com.au/Parts.php
Photo

Post has attachment
T20 Battery Replacement Motor T20 ODS Maximum Lifting Capacity of 32 kg

Battery operated roller shutters over 4 square meters and under 8 square meters in area are fitted with the T20 battery motor
  The new T20 Battery Replacement Motor cost $190.00 each.
$25.00 Postage & Handling
Drive Wheel Kit if required $14.00 each Inc. GST and Postage and Handling.

Curtain weight: 1sq mtr = 4 kg = 8 square meter of shutter (for example, 3200 mm x 2500 mm window maximum) or any other combination that equals 8 square meters or less.
Photo

Post has attachment
Battery motor, L10 Mechanism.L10 ODS Maximum Lifting Capacity of 16 kg

This motor is manufactured in Adelaide by OZRoll, and is used in the Domestic range of battery roller shutters, it's powered by the E-Port controller, and used in shutters with an overall size of less than 4 square meters, or with a weight of less then 16 Kg.
The battery motor is too large to fit in the 150 mm head box, and is only suitable for the 165 mm, 180 mm and the 205 mm head box.
This motor is not suitable for the tropical part of Australia.
When replacing this motor you will need to reset the down stop limit, the up limit requires no setting. http://www.rollershutters.com.au/Replace-L10-Motor-and-Reset-Down-Stop-limit.php
Axle insert may be required http://www.rollershutters.com.au/Battery-L10-Replacement-Motor.php
L10 Mech replacement battery motor $145.00 each Inc. GST and Postage and Handling.
Photo

Post has attachment
E-Port Wall plate Conversion Kit
The old ODS Control 10 by OZRoll has been discontinued, this has been replaced by the E-Port controller, you will also need the E-port wall plate, or conversion wall plate kit.
This conversion kit uses the existing fixing points that secured the old L10 wall plate.
With this new conversion kit fixed to the wall, you can now fix the E-Port wall plate (that is supplied) to this, this will allow you to use the new E-Port controller.
E-Port Wall plate Conversion Kit $16.50.Postage and Handling for the Wall Plate is $15.00
Photo

Post has attachment
E-Trans RF Remote

The E-Trans RF Remote will provide wireless control to the E-Solar Pro and the E-Port RF Controller systems, and is offered in two versions 1 Channel and 9 Channel.
Both versions will only operate a shutter that is using the RF controller. The RF remote will not operate a standard controller.
The RF Remote when programmed can operate one or more roller shutters connected to the RF controller. The 1 Channel version will allow for only one combination to be programmed. The 9 Channel version will allow for up to 9 different combinations. These combinations are totally programmable by the user.
http://www.rollershutters.com.au/E-Series.php#E-Trans
Photo

Post has attachment
The E-Port RF Controller
 
This RF controller with the E-Trans hand held RF Remote, will allow remote control operation.

As the RF controller is constantly monitoring the RF remote for a transmitted signal it will consume battery power at a higher rate than the standard controller.
With this in mind it is recommended that the RF controller is used in conjunction with the E-Solar.
All roller shutter parts, pricing, and delivery cost, can be found at this link on our website:
http://rollershutters.com.au/Parts.php
Photo

Post has attachment
Old style L 10 Replacement Controller
Discontinued
The new replacement controller that replaces the old L 10 controller is the E-Port controller with the Lithium-Ion batteries, you would also require the E-Port wall plate OR the E-Port Wall plate Conversion Kit, which is supplied with the E-port wall plate.
The new E-Port wall plate is smaller than your existing L 10 wall plate, which will not cover both old fixing points, unless you use the Wall plate Conversion Kit.
Your existing L 10 charger will also charge the E-Port controller.

All roller shutter parts, pricing, and delivery cost, can be found at this link on our website:
http://rollershutters.com.au/Parts.php
Photo

Post has attachment
PhotoPhotoPhotoPhotoPhoto
10/7/16
44 Photos - View album

Post has attachment
The E-Port controller is supplied with each battery roller shutter, included in the price.
A new E-Series replacement battery controller costs $125 each inc. GST & Postage & Handling.
The New E-Series Controller
http://www.rollershutters.com.au/E-Port-Controller-Diagnostics.php
Replace L10 controller with the new E-Port Controller.
http://www.rollershutters.com.au/ODS-Control-10-Upgrade.php
OZRoll Drive System (ODS) New E-Series
http://www.rollershutters.com.au/battery.php
Photo

Fantastic morning in Hahndorf. Having a busy time keeping track of client orders and questions.

http://rollershutters.com.au
Wait while more posts are being loaded