Profile cover photo
Profile photo
Nigel Stoker
12 followers
12 followers
About
Posts

Post has attachment
http://northwestyorkshire.tiledoctor.biz/grade-a-tumbled-travertine-floor-transformed-in-ripon/

Grade A Tumbled Travertine Floor Transformed in Ripon

My client gave Tile Doctor a call to discuss their hallway floor which was in a poor state, they thought the tiles were Travertine but weren’t 100% sure as it was installed before they acquired the property. I arranged a time to do a site survey to see what we could do for them.

The property was in Ripon which is a lovely Yorkshire cathedral city just North of Harrogate. I took a look at the floor and confirmed the tiles were indeed Travertine, in fact I identified it as Bullnose Grade A Tumbled Travertine which is a premium product and well worth renovating. Travertine is a natural stone material that has unique features and colouring that no other stone can offer. The distinctive design and natural patterns found within the stone make it very popular as a flooring material and is often used as bathroom wall tiles too. Travertine’s durability makes it ideal for all manner of projects and it is often used externally.

Like any stone floor it’s important to maintain the sealer if you want it to look its best and from what I could see the sealer had now failed and was letting dirt get into the pores of the Travertine making it very difficult to keep clean. The owners also had two dogs which may have contributed to the wear and tear. I discussed with them the prognosis and we agreed a quote for completing the work to renovate the tile and grout.

Cleaning Tumbled Travertine Floor Tiles in Ripon
I arrived the following week and started by protecting the skirting boards etc. with tape to protect them from splashing during the cleaning process. Once that was done I started burnishing the Travertine with a set of diamond burnishing pads which are run over the floor with water to remove dirt, old sealers and restore the polished appearance of the stone. Using a rotary floor machine, you start with the coarse 400-grit pad before moving onto the 800 and 1500 grit pads rinsing the floor in between each pad to remove the slurry that is generated.

My next task was to tackle the cream coloured grout which had become dark with dirt. To do this I used a cleaning product called Tile Doctor Pro-Clean which is a concentrated, multi-purpose high-alkaline cleaner that’s particularly good on heavily soiled and neglected grout. You dilute it into different strengths depending on the nature of the problem and it works best when left to dwell and soak in for about ten minutes first. I scrubbed all the grout lines by hand with a scrubbing brush to get them really clean and then rinsed with water and removed the slurry with a wet vacuum.

Finally, the cleaning process was completed using the last of the four burnishing pads which is a 3000-grit polishing pad which is applied dry with only a little water sprayed on the tile.

Given the size of the floor I had to work in sections and the photograph above shows the difference in the tile and grout between two of the sections. Once done the floor was left overnight to completely dry out, the warm weather made this a quick process.

Sealing a Tumbled Travertine Floor in Ripon
Returning the following morning, I used my moisture meter to test the moisture levels in the floor. Applying the sealant to a floor that is still damp prevents it from curing. I had selected to use the Tile Doctor Ultra Seal on this job, this is a premium product, which gives a no-sheen, natural-look, penetrating sealer made to provide maximum stain protection. You can also use it as a pre-grouting sealer. The customer didn’t want the floor to be shiny, so this was the perfect product for them.

The customers were really satisfied with the massive transformation in the floor returning the floor to almost new. They were so pleased that the floor didn’t look tired any longer and it would now be able to withstand the traffic of their two dogs. The floor would be much easier for them to clean and maintain.
Add a comment...

Post has attachment
http://northwestyorkshire.tiledoctor.biz/worn-sealer-replaced-on-a-slate-tiled-floor-in-york/

Worn Sealer Replaced on a Slate Tiled Floor in York

The photographs below are of a Slate Tiled floor in a house in York, a walled city in North West Yorkshire which is very famous for its Viking heritage and its many landmarks, including the stunning York Minster. I visited the client to discuss what could be done to improve the look of the slate tiles which were installed in the kitchen and run into the downstairs cloakroom WC.

I could see that the floor was suffering from the usual problem of dirt becoming ingrained into the pores of the stone making it difficult to clean effectively. This happens as the protection provided by the sealer wears off with use and the stone becomes dull and lifeless with the trapped dirt; additionally, the floor had some bad scratches from chairs being dragged across the floor. Being a Kitchen, the area was in used to high family traffic, so it was in need of some care and attention. The client was happy to go ahead with my quote.

Cleaning a Slate Tiled Floor
I arrived the following week and started by taping up and protecting the surrounding areas and thresholds. Then working in sections, I applied a strong dilution of Tile Doctor Pro-Clean (1 part Pro-Clean to 3 parts water) to the floor and left it to soak in and get to work breaking down what was left of the old sealer and dirt. This is a multi-purpose cleaner which works hard on stubborn areas. It was then scrubbed in using a black scrubbing pad fitted to a rotary floor buffer. I then used more Tile Doctor Pro-Clean on the grout which was stained in places and this was scrubbed in by hand using a thin stiff grout brush.

The floor was then rinsed with water, and the now soiled cleaning solution removed with a wet vacuum before moving onto the next section. We try and keep the mess to the absolute minimum. One area included a downstairs WC which was too tight to get the floor buffer in so there was no option but to scrub the tiles and grout by hand.

After cleaning all the slate and grout I inspected the floor and was pleased to see that the scratches were a lot less obvious after cleaning, so I suspect it was the old sealer that had been mostly affected. Had the scratches been deeper we would be looking at resurfacing the stone with milling pads which is a messy and more expensive process. The client was very pleased to hear that wouldn’t be required.

After a final rinse the floor was looking much better already and was left to dry off overnight aided by the hot summer weather.

Sealing a Slate Tiled Kitchen Floor
I returned the next day and checked the floor was fully dried out by using my moisture meter. All the readings were fine so the lovely weather had done its job which was much appreciated by myself as this greatly helps the floor cleaning process.

I applied four coats of Tile Doctor Seal and Go which is a water-based sealer (so no smell) that leaves a lovely deep lustre to the floor. The scratches had all but disappeared and I was able to get on with the job quite quickly due to the bonus weather that helped he sealer dried a lot quicker than usual between each coat.

The customer was very pleased with the finished floor, and I think you can see from the pictures how much better it looks. It will be much easier for them to clean and maintain in the future.
Add a comment...

Post has attachment
http://northwestyorkshire.tiledoctor.biz/carrara-marble-orangery-floor-harrogate/

Carrara Marble Orangery Floor Harrogate

These photographs are of a large Black Carrara Marble floor at customers house in nearby Harrogate, a North Yorkshire spa town which is steeped in history. In-fact the town became known as ‘The English Spa’ in the Georgian era, after its waters were discovered in the 16th century. In the 17th and 18th centuries its ‘chalybeate’ waters (containing iron) were a popular health treatment and the influx of wealthy but sickly visitors contributed significantly to the wealth of the town.

When I reached the clients’ property she showed me to the Orangery. This was a lovely garden room and it had a large and expensive Black Carrara Marble tiled floor installed. The floor was installed some time ago and had since lost some of its shine and lustre which is not unusual as foot traffic on the floor will wear down the shine over time particularly as it was a dark black colour.

Polishing a Black Carrera Marble Orangery Floor
I was aware that Carrara Marble is usually polished at the factory and re polishing to achieve the same high-end finish requires the use of some very expensive machinery which most Tile Doctors including myself don’t carry.

However, I am always up for a challenge and not to be beaten there were a couple of things we could do to improve the appearance of the floor. Carrara Marble by the way gets its name from the city where it’s quarried which is in the province of Massa and Carrara in the Lunigiana, the northernmost tip of modern-day Tuscany, Italy. It is not surprising that such a beautiful material comes from such a lovely place! In use since Roman times Carrara Marble is an expensive, high quality marble used in sculptures and building décor.

So, after discussing all this with the customer and a little history, l set about giving the tiles a spray burnish with a very fine 3000-grit diamond burnishing pad and a little water sprayed onto the Marble. The 3000-grit pad is a very fine grade that would not damage the surface of the marble, simply restore the shine. This pad had the desired effect and did a good job of bringing back the deep polished look of the floor.

Sealing a Black Carrera Marble Orangery Floor
Once I had finished the spray burnish and ensured the floor was dry, I applied two coats of Tile Doctor Colour Grow, this product is an impregnating colour intensifying sealer that provides durable stain protection by occupying the pores in the stone thus preventing dirt from becoming ingrained there. I chose to use this primarily to seal and protect the stone but also to enhance the beautiful natural colours.

The job was completed in a single day and the result was a big improvement on the dull Marble tiles I had come across that morning. It’s probably difficult to tell from the photographs but I felt the combination of spray burnishing and sealing had completely changed the appearance of the floor.

The customer was very happy indeed, the floor looked much brighter and with the sun shining through the huge area of glass, the highly polished look had definitely been restored.
Add a comment...

Post has attachment
http://northwestyorkshire.tiledoctor.biz/renovating-a-sandstone-tiled-floor-at-a-12th-century-undercroft-near-bedale/

Renovating a Sandstone Tiled Floor at a 12th-Century Undercroft Near Bedale

When I was asked to visit this job, I understood that the property was Grade One Listed and I was in for a treat when I arrived. The property is an undercroft which is traditionally a cellar or storage room, often brick-lined and vaulted and used for storage in buildings since medieval times. In modern usage, an undercroft is generally a ground (street-level) area which is relatively open to the sides but covered by the building above.

This example was part of a large 12th Century building near Bedale which is halfway between Harrogate and Middlesbrough, that had been converted into luxury apartments. It was truly impressive, by far one of my favourite jobs to date.

The magnificent building had been tastefully restored and renovated some years ago. You will see from the photos how unique it is, although it is hard to do it justice in photos. Since that time the huge 60sqm Sandstone flagstones had become dirty and now needed to be deep cleaned and restored to its’ former self.

I discussed what was required with the owner and went through the cleaning procedure I felt would be most appropriate. This was well received, and we agreed my quote and arranged a suitable time to return and complete the work. I must say I felt honoured and privileged to be asked to work on the floor as this is not something you would trust many people with.

Cleaning a Large Sandstone Floor in an Undercroft
I returned on the agreed date to start the cleaning and I was a bit apprehensive at first, as naturally with such an old building I wanted to be confident that the methods I was going to use would work without issue. Also, there was some very, very expensive Marble statues scattered about near the edge of the floor which I was very mindful of. It was clear that the utmost care was required to restore this beautiful floor. In the end I did not need to worry as it was quite straightforward. The floor was nice and flat and graded sandstone, in pretty good physical condition.

I cleaned the floor by applying a strong dilution Tile Doctor Pro-Clean to remove old sealers and break down the dirt. I left this on the floor for ten minutes before scrubbing it in with what turned out to be several black scrubbing pads to get the dirt out of the stone. Pro-Clean is a highly effective Tile and Grout cleaner which can deal with all sorts of issues including grease, grime and general dirt build up.

I worked in sections and found some of the flagstones quite challenging to clean due to their sharp edges which tore into the pads and destroyed a few during the process. Luckily, I had bought plenty of replacements along and with a bit of perseverance, I was able to give the floor a very thorough clean. The floor was then rinsed with water and the soil extracted using a wet vacuum.

After cleaning and rinsing the whole floor I left it for a few days, so it could dry out thoroughly before I returned to seal it.

Sealing a 60m2 Sandstone Floor in a 12th Century Undercroft
When I returned I checked that the floor was completely dry by taking some moisture readings. All was well, but I noticed that the room became dusty very quickly from all the exposed stone, so l vacuumed the floor first.

I chose to use Tile Doctor Ultra Seal for this floor, main reasons being it’s an impregnating sealer that works by occupying the pores in the stone thus preventing dirt from becoming ingrained there also, it leaves a natural look finish that doesn’t darken the stone which was ideal for use in the Undercroft where there isn’t much natural light. I applied a couple of coats to the floor and it was soon looking good.

It was a massive transformation and the clean floor really lightened up the whole room. The client was very pleased with the result. I think you will agree this is a very special room!
Add a comment...

Post has attachment
http://northwestyorkshire.tiledoctor.biz/cleaning-and-restoring-a-traditional-yorkshire-stone-floor/

Cleaning and restoring a traditional Yorkshire Stone floor

This was a typical and relatively straightforward job for me, but I thoroughly enjoyed it because it amply demonstrates how a modest investment in professional cleaning and sealing can transform a tired old Yorkshire Stone floor into something really stunning!

Older properties in the small village of East Morton, near Keighley in West Yorkshire, are built almost entirely of locally quarried Sandstone – from its Manor Houses, Churches and barns to the many cottages built during the Industrial Revolution for workers in Morton’s textile and paper mills. Yorkshire stone is a sedimentary rock made up of quartz, mica, feldspar, clay and iron oxides. Its colour depends on the ratio of minerals it contains, and differs throughout the quarries where it is mined. It is incredibly hard wearing and durable, and has been used for building, construction and landscaping since mediaeval times.

The lovely original Yorkshire Stone floor in this client’s home was in great condition but looked lifeless and uninteresting. As the local Tile Doctor agent, I was tasked with deep cleaning and sealing the floor to bring it back to life. Rather unusually, this customer wanted a matt finish for the floor – which on reflect was a great choice.

Cleaning a traditional Yorkshire Stone internal floor
I started by deep cleaning the floor with Tile Doctor Pro-Clean. This is a concentrated, multi-purpose high-alkaline cleaner, stripper and degreaser which is safe to use on all types of tile, stone and grout including natural stone. I diluted one part Pro-Clean to three parts water – enough to ensure that any traces of grease, scum, oil, mildew and algae were removed and scrubbed it in using a floor buffing machine fitted with a black scrubbing pad and running at slow speed to cut down on splashing. This brought out all the dirt from the floor which I then rinsed off with more water and extracted with a wet vacuum. Stubborn areas were re-treated using the same process and once I was satisfied the floor was clean I left the floor for two days, so it could dry out thoroughly.

Sealing a traditional Yorkshire Stone internal floor
The next step was to test a couple of suitable Tile Doctor sealers to see which would give the best matt finish the customer was looking for. I decided upon Tile Doctor Ultra Seal which is a premium, solvent-based penetrating sealer formulated to provide maximum stain protection yet without changing the colour of the stone. Being a premium product it’s ideal for high traffic areas such as hallways, kitchens and stairs, it’s also an excellent grout sealer and a perfect choice for this floor. Most importantly, it gave the no-sheen, natural-look finish that the customer wanted.

I started by sweeping and vacuuming the floor to ensure that every trace of dust was removed before sealing. Then I applied two coats of Tile Doctor Ultra Sealer – one in the morning and one in the afternoon to allow the first coat to dry out before applying the second. 30 minutes after applying the second coat I tested with water droplets to make sure that the surface was completely sealed. The customer was able to walk on and use the floor as normal after just two hours, and after just 24 hours the full cure was achieved.

What a transformation! The lifeless, grey floor was now full of colour and character, highlighting all the wonderful and original textures and tones in the Yorkshire Stone. The customer was very happy!
Add a comment...

Post has attachment
http://northwestyorkshire.tiledoctor.biz/deep-cleaning-lapicida-sandstone-flagstones-in-bedale/

Deep Cleaning Lapicida Sandstone Flagstones in Bedale

This customer who lived in the old North Yorkshire market town of Bedale, had a Lapicida Sandstone floor installed many years prior and over the years the sealer had worn off and dirt had become ingrained into the pores of the stone making it dull and difficult to clean effectively. Based in Harrogate, where they have Europe’s largest stone gallery, Lapicida are a premier Tile and Stone company that specialise in reclaimed Sandstone with prices that range from £79 to £594 per square metre.

Naturally having such an expensive stone floor installed my customer wanted it to look its best however when your living with a stone floor day in, day out you fail to notice the gradual decline in its overall appearance. Then one day you suddenly realise the floor is overdue a deep clean and reseal and call in Tile Doctor; there is an alternative however, simply speak to Tile Doctor about setting up an annual Maintenance Plan whereby we pop by once a year to clean the floor and top up the sealer.

Deep Cleaning a Lapicida Sandstone Floor
To deep clean the floor the sandstone flagstones were covered in a strong 1:3 dilution of Tile Doctor Pro-Clean which was left to dwell and soak into the stone for ten minutes before being scrubbed clean using a rotary buffing machine fitted with a black pad. The now dirty cleaning solution was then removed using a wet vacuum and then the whole floor washed down with water and stubborn areas re-treated until I was satisfied. Unusually for Sandstone it was all graded and uniformly flat which made cleaning a lot easier.

With the floor clean and all the dirt removed it revealed some black marks, most of which were from candle wax which is very difficult to get off. To tackle this problem a heat gun was used to melt the wax and then it was dappled with a clean cloth. This process was mostly successful, but some still left a faint Mark which the customer was ok with.

After giving the floor a final rinse and drying it as much as possible with a wet vacuum it was left to dry off fully overnight.

Sealing a Lapicida Sandstone Floor
I returned the next day to seal the floor first checking it for dampness using a damp meter. The flagstones were dry. I was going to seal the Stone with Tile Doctor Colour Grow which would have enhanced the natural colours in the stone, but the customer liked the light appearance of the cleaned stone, so l used Tile Doctor Ultra Seal instead; Ultra-seal is a natural look sealer, so it doesn’t darken the stone. Both sealers are what we call impregnators which work by soaking into the pores of stone protecting it from within by preventing dirt from becoming ingrained.

I’m sure you will agree the floor looks much improved, certainly the customer and myself were both very pleased with the transformation of the floor; my customer even left the following testimonial on the Tile Doctor feedback system.

Nigel Stoker was knowledgeable, efficient and very pleasant. My floors are looking amazing. Claire G, Bedale
Add a comment...

Post has attachment
http://northwestyorkshire.tiledoctor.biz/victorian-hallway-floor-repaired-and-restored-in-shipley/

Victorian Hallway Floor Repaired and Restored in Shipley

Shipley is a town in West Yorkshire that was heavily shaped by the Industrial Revolution and the Victorian period. It became particularly well-known for its textile industry and some of the original mills in which textiles were manufactured still survive in the town today. Being in West Yorkshire, Shipley is also part of what is commonly known as ‘Brontë country’ – once home to the famous Brontë sisters.

Many Victorian era properties still survive in the area too and all too often the original Victorian tiled floors contained within are not well maintained. I recently visited a customer in Shipley who had a Victorian tiled hallway that was in need of a deep clean and seal. What’s more, the customer told me that there were around 20 loose tiles in the hallway that would need to be reinstalled.

On the first day, I started by refitting the 20 loose tiles in the hallway. The problem however was a lot worse than originally thought and, in the end, I had to take up 108 tiles, so I could rebuild the base of the floor, and then relay them. This process took up most of the day but at least the adhesive and grout would be set in time for cleaning the next day.

Cleaning a Dirty Victorian Tiled Hallway
On day two I focused on deep cleaning the tiles and removing any remaining sealer by applying a strong dilution of Tile Doctor Pro-Clean. Pro-Clean is a strong alkaline heavy-duty tile and grout cleaner that serves the purpose of both cleaning the stone and when used in a strong dilution will strip off sealers.

I applied the Pro Clean liberally across the length of the hallway and left it to soak into the tiles for about twenty minutes. This allows the product time to breakdown the sealer and dirt before being scrubbed in with a black scrubbing pad.

Special attention had to be paid to parts of the floor which had suffered paint splashes from previous decoration. I was also surprised to find that there were even some chewing gum stains marking the tiles. These were removed using the combination of a steam cleaner, more Pro-Clean and the careful use of a handheld scraper.

The floor was then given a thorough rinse with fresh water and then dried as much as possible with a wet vacuum. It was then also left to dry off overnight.

Sealing a Victorian Tiled Hallway
Upon returning to the property the next day I checked for any moisture issues with a damp tester. Thankfully, the floor proved dry and I could proceed with sealing the tiles which was done using four coats of Tile Doctor Seal and Go that leaves a deep satin finish that the customer had requested.
Add a comment...

Post has attachment
http://northwestyorkshire.tiledoctor.biz/re-sealing-jura-limestone-tiles-in-wetherby/

Re-Sealing Jura Limestone Tiles in Wetherby

This large Jura Limestone floor had been installed in a house in the history Yorkshire town of Wetherby twelve months prior and after only one year the sealer had worn off. Now dirt was getting trapped into the pores of the stone causing it look dull and uninviting and making it difficult to clean.

The builder who installed the floor must have used a really cheap sealer as they usually last a lot longer than a year and such a premium stone really deserved better. There were also a few other issues, it seems the floor wasn’t completely clean when it was sealed causing grit and dirt to become stuck to the floor, additionally the sealer had been applied with the underfloor heating on which is a big No No, for best results sealers need to be allowed to dry off naturally at room temperature.

The floor was now in a sad state and the owner wanted the floor stripping back and sealing properly. He had received a number of quotes for this job that were between one and two days! To do the job correctly was a 5-day job, fortunately the owner of the property wanted the job doing properly this time around.

Stripping and Polishing Jura Limestone Tiles
The best way to restore high quality stone like this is to hone the floor using varying grits of abrasive floor pads. Tile Doctor have developed a technique for this known as burnishing which is a version of stone polishing that involves the application of Diamond encrusted pads. Each pad in the system has its own level of grit and is applied in sequence from coarse to fine in order to re-hone the finish on the stone.

Before burnishing the floor however, the floor was given a clean with Tile Doctor Pro-Clean to remove any grit but with a main focus on scrubbing the grout lines by hand to get them as clean as possible. Once I was happy with the grout the floor was rinsed with water and the soiled cleaning solution extracted using a wet vacuum.

I started with the Coarse 400 grit pad lubricated with water and then after rinsing the floor with water I moved on to the Medium 800 grit pad, Fine 1500 grit pad and finally the Very Fine 3000 grit pad further rinsing in-between each pad to achieve a refined polished finish. This process may sound straight forward but the floor had been laid throughout the ground floor and so each section took time to complete.

Stripping and Polishing Jura Limestone Tiles
The last step was to seal the floor using two coats of Tile Doctor Ultra Seal which is a premium natural look impregnating sealer the protects the stone from within by occupying the pores so dirt and other contaminates can’t get in there.

The floor now looks fantastic and it should stay that way for some time to come.
Add a comment...

Post has attachment
http://northwestyorkshire.tiledoctor.biz/maintaining-a-victorian-tiled-entrance-in-ilkley/

Maintaining a Victorian Tiled Entrance in Ilkley

Most stone and tile benefit from the protection that a sealer provides to stop dirt becoming ingrained into its pores. However, the act of walking on the tile causes wear and this over time will lead to the sealer wearing off and dirt reaching the pores; the worse thing is you rarely notice it happening because it takes a long time to wear down a sealer.

Most of my customers have this problem and call on me to clean and reseal the floors every few years when it becomes difficult to clean effectively. The alternative which I do for a number of my clients is to have the floor lightly cleaned and a new layer of sealer added every six to twelve months.

This Victorian tiled entrance at a period house in Ilkley was not in too bad a shape just a little dirty and dull and the owner was keen to have is renovated in the run up to the Christmas holidays. Ilkley is a lovely town in West Yorkshire which became very fashionable in the Victorian era due to the health benefits of the local water, this led to a lot of Victorian architecture and tiled entrance floors like this one are very typical in the area.

Cleaning a Victorian Tiled Entranceway
To get the dirt out of the tile and grout I applied a strong dilution of Tile Doctor Pro-Clean to the tiles and left it to soak in for fifteen minutes. Pro-Clean is a very reliable cleaner for all types of tile and grout including natural stone, Limestone, Slate and Travertine, amongst others; additionally, when used in a strong dilution it will strip off old sealers. The solution was then worked into the tile using a black scrubbing pad fitted to a rotary machine and the soil extracted using a wet vacuum.

I gave the floor a light rinse with water to remove any trace of cleaning products and then inspected the floor to ensure it was up to standard. At this point I could see there were flecks of paint on the tile around the edges of the floor from previous decorating work and, so I removed carefully removed these with a scrapper and a hand-held diamond block.

The floor was given a final rinse and the wet vacuum used to extract as much moisture from the floor as possible before leaving it to dry for the evening.

Sealing a Victorian Tiled Entrance with a Matt Finish
I returned the next day to seal the floor first discussing the finish that the customer wanted for the tiles. Typically, I recommend using a satin sealer for Victorian tiles as it adds a nice sheen to the tile however surprisingly the owner wanted a matt finish.

Tile Doctor has a full range of sealers available to cater for all requirements so for this floor I applied three coats of Tile Doctor Colour Grow which leaves a matt finish whilst enriching the colours in the tile.

The tiles are now full of life and with the paint specs removed there is now a crisp black edge between the floor and the skirting which the customer also picked up on.
Add a comment...

Post has attachment
http://northwestyorkshire.tiledoctor.biz/dirty-paint-marked-victorian-tiled-entranceway-restored-in-roundhay/

Dirty Paint-Marked Victorian Tiled Entranceway Restored in Roundhay

Roundhay is an affluent area of North Leeds which is well-known for the fantastic Roundhay Park. The park is large enough to contain two lakes, extensive woodland, formal gardens and even golf courses! It’s the premier attraction for anyone fortunate enough to live in the area, or anyone visiting from nearby.

I recently visited a customer who lives in Roundhay and was looking for help in restoring the small Victorian tiled entranceway at the front of her house. The tiles were in a shocking state, but it’s not hard to imagine why – the entrance to a house receives a lot of foot traffic and is not typically taken care of regularly. These tiles were also marked with paint splashes left over from decoration work, making them look even worse.

The appearance of the entranceway did not set the right standard for the rest of the house, so the property owner was keen to have it restored professionally.

Cleaning a Victorian Tiled Entranceway
I informed the customer that I could have the tiles rejuvenated within a day’s work. To begin, I used a scrapper and wire wool brush to manually remove some of the most stubborn paint marks.

Following this, I applied a strong solution of Tile Doctor Remove and Go, before leaving the product to dwell for about an hour. Remove and Go is multi-purpose stripping agent that can remove any adhesive and paint deposits, as well as many types of old coatings and sealers.

To work the product deep into the tiles, I agitated with an abrasive cleaning pad and then rinsed the area with fresh water. This had the desired affect and all the unsightly paint marks were removed.

Next, I gave the floor another thorough clean to remove any general muck and ingrained dirt. This was done using our high-alkaline cleaner, which we typically use on Victorian tiles, known as Tile Doctor Pro-Clean. In fact, Pro-Clean is a very reliable cleaner for all types of tile and grout including natural stone, Limestone, Slate and Travertine, amongst others.

Sealing a Victorian Tiled Entranceway
Since I told the customer I would able to finish the job within a day, I dried the floor quickly using a heat gun so it could be sealed there and then. To seal the floor, I applied four coats of Tile Doctor Seal and Go, which is a topical sealer formulated to provide maximum protection along with a high-quality, low sheen finish.

As you can see from the photos above, the entranceway was absolutely transformed. These tiles are now a true asset to the rest of the property, rather than looking out of place! I’m please to say my customer was amazed by how quickly such a big difference could be made and left the following glowing feedback.

I can’t believe the before and after pictures. The restoration of the tiles is top quality, they are so much brighter and richer in colour – especially without the garage paint hiding the detail! Nigel did an amazing job, even better than I could have hoped for, and is a lovely guy as well. Would definitely recommend.
Add a comment...
Wait while more posts are being loaded