个人资料封面照片
个人资料照片
Liu Yang
1 位关注者
1 位关注者
简介
社群和收藏集
查看全部
信息

此信息包含附件
The PVC wall panel is partially convex and concave
(Wood plastic product supplier: https://diyonlinemag.com/model/wall-panel-model.html )

In general, the local convex and concavity of the wall plate is mainly in the vacuum of the mould. If the vacuum degree is not enough, or the cooling water of the mould is not enough, the adjustment method is to increase the cooling water amount of this part, to increase the vacuum degree through the water seal, to speed up the cooling speed of the wall panel products. If the water in this part is not smooth when it is at its maximum, then the forming die will be removed and its true air path cleaned.
照片
照片
2018/12/29
2 张照片 - 查看影集
发表评论…

此信息包含附件
The wall panel is not straight
(Suppliers of wood-plastic products: https://diyonlinemag.com/model/deck-model.html )
First of all, it is necessary to check whether the finalizing die and the orienting die are right or not. In general, the bending of the wall panel to the upper part may be because the orienting die and the orifice die are not right, and the position is on the high side. And the lower bending of the wall plate is due to the low profile of the formalized die. Check the water cooling groove, traction and sewing table to see if the formalizing die and the formalizing die have been aligned. After all these reasons have been eliminated, there are two other possible reasons for non-straight reasons:
(1) PVC wall panel products cooling degree is not enough, the second is the temperature of the water tank is still relatively high, in the case of a force and distortion, specific adjustment method for increasing the shaping mould and water tank cooling water or to find a way to reduce the temperature of the cooling water is not directly reduce the speed of production;
(2) on both sides do not match the speed of discharge, and adjustment methods: the observation after the thermostat at the same on both sides of the mold and a half hours, if there is no change to see which side discharging speed is which side of the temperature increase of several degrees Celsius, or which side is which side is expected to soon put to reduce the temperature of several degrees.
照片照片照片
2018/12/29
3 张照片 - 查看影集
发表评论…

此信息包含附件
WPC decking is a new kind of environmental protection products, at the same time with woodiness sense and water-resistant anticorrosive properties, make it become a kind of excellent performance and very durable outdoor waterproof anti-corrosion materials, WPC decking is very environmental protection. Its service life is longer, but also more affordable and environmentally friendly.

web: https://diyonlinemag.com/

1. WPC decking is held concurrently with the characteristic of lumber and plastic, so it is waterproof performance is better not only, but moisture-proof performance is very good also. This is a good solution to the problem that traditional wood products tend to rot after encountering water.

2. The colour of the WPC decking is much more, it has the texture and texture of natural wood, and we can also customize the colour we like according to our own preferences.

3. The plasticity of the WPC decking is also relatively strong. It can be made into the shape we like when we use it.

4. The WPC decking is a kind of pollution-free decking, it does not contain benzene in the middle, and the content of formaldehyde only has 0.2. The WPC decking is Europe's top environmental standards. We can also save on the use of wood in the manufacturing process.

5. Its fire resistance is also good. The fire rating is B1. In other words, it can be extinguished automatically after it encounters fire. And it doesn't produce harmful gases. It effectively ensures the safety of the family environment.
照片
发表评论…

此信息包含附件
eco Flooring used for Garage
eco flooring is quickly becoming popular among garage owners. eco is a versatile material being increasingly used in flooring and other applications. Concrete and other flooring materials are ridden with problems like being slippery, dirty and prone to damages. eco is an effective flooring solution for garage owners <a href='http://resultkey16.in'>Environmental Protection Outdoor Plastic Wood Products Operators</a>. These eco flooring solutions come in the form of floor paint or enamel. The benefits these materials provide are that they are durable and long-lasting. Moreover, they come in an attractive range of textures and colors. eco as a material has been acknowledged as one of the most popular materials for garage floor coatings and as a garage renovation solution.

Garages are often ignored and disregarded when it comes to renovating the whole house. Garages are left unattended and unmaintained for a long time, leading them to become extremely dirty. It could indirectly result in the vehicles parked, and the associated parts and mechanics getting dirty and prone to rust and degradation. eco-based garage door floorings help maintain the cleanliness and functionality of the garage. Floorings and garage floor coatings need to be long lasting and reliable. eco flooring and eco based garage floor coatings are dirt resistant. Moreover, they are peel proof and cleaning becomes extremely easy with garage floor eco.

Garage floor eco is resistant to corrosion, cracks, and peeling. eco performance as a somekeyword is extremely effective as it is made using a potent mixture of different substances like epoxide and polyamine. eco garage flooring is easy to install and maintain. The material is versatile and flexible and does not take time to recover. eco floorings also provide optimum traction area and help maintain the effectiveness of the parking area.
照片
发表评论…

此信息包含附件
Epoxy Garage Floor Paint Is a Home Mechanic's Best Friend

For home mechanics that use their garage as a regular work space, epoxy garage floor paint is a great investment to keep their environment safe, clean, and easy to function in. With epoxy floor paint, a simple day's work can translate into years of high-performance flooring, adding value to your property while protecting your concrete surface at the same time.

In terms of safety, by choosing light colored epoxy paint, the shiny surface of a finished garage floor will provide up to 300 percent more reflectivity than regular flooring. This means a brighter work area, and the ability to light the area without having to resort to high powered, energy draining industrial lighting. In addition, the fleck that comes in an epoxy floor kit provides a non-skid surface for workers as they move between projects, ensuring that no slips or falls will occur on a wet floor.

For cleanliness, epoxy garage floor paints are second to none, as their solid, non-porous surface deflects staining and spillage from even the toughest liquids. From oils and paints, to any car-related fluids, most clean-ups will take only the swipe of a cloth to make the surface as good as new. In addition, regarding regular upkeep and maintenance, these epoxy floors are also easy to care for, needing only a regular mopping or sweeping to keep grit and dirt from wearing against the finish.
http://resultkey16.in/
Lastly, when looking for a high-performance space that will be easy to function in, epoxy somekeyword outshines its competitors because of its no-fuss application process and exceptional durability. After the floor finish has dried for the recommended amount of time after application, home mechanics can get started right away enjoying their pristine new work environment secure in the knowledge that their garage floor will be able to withstand the wear and tear of regular use. They can then continue to work with confidence, focusing on their projects instead of on protecting their floors from unanticipated damage and staining.
照片
发表评论…

此信息包含附件
ECO nanocomposites mechanism - resin, composite material

HC coating Network: ECO resin, Phenolic resin And unsaturated Polyester resin Known as the three universal thermosetting Resin. They are the largest amount of thermosetting resin, the most widely used species. ECO resin containing a unique ECO and hydroxyl, ether, and other activist groups, and a polar group, which has many excellent properties. Compared with other thermosetting resins, ECO resin types and grades up, performance varied.
ECO resin Curing agent Type more, plus many of the promoters, modifiers, Additive And so on, can be a variety of mix and combine so that it can be a variety of excellent performance, the different characteristics of ECO curing agents and objects. Almost able to adapt and meet a variety of performance and process performance requirements. Other thermosetting resins which are unmatched. ECO composite materials to ECO resin as the substrate material; resin-based composite materials used in industry the largest varieties of ECO resin, a glycidyl ether type ECO resin in the first category, while most of the second phenyl propane ECO resin (hereinafter referred to Bisphenol A ECO resin) mainly; followed by glycidyl amine ECO resin.
http://resultkey16.in/ ECO/inorganic nano-particle composite Mechanism The existence of nano-materials to give a high physical and mechanical properties of ECO resin, its strength, stiffness, toughness, and heat resistance has greatly improved. Judging from the current study, the mechanism is as follows.
nanoparticles dispersed in the matrix when matrix by shock generated between particles and matrix micro-cracks (craze); while the matrix between particles also produced plastic deformation to absorb impact energy, thereby achieve toughening results. With the finer particle size, particle surface area increases, particles and the substrate contact area between the increase. Material adverse impacts will produce more microcracks and plastic deformation, and thus absorb more impact energy, the toughening effect to improve. When the filler reaches a critical value added, the particles are too close between the materials produced by the shock too much micro-cracks and plastic deformation, and its development into the macro-stress cracking, so that impact performance.

The polymer/composite materials, rigid inorganic particles, the impact toughness increase with two factors: First, resin dispersion of the impact energy capacity; second rigid inorganic particles in the surface of the impact energy absorptive capacity. Its impact on these two factors cannot entirely be allocated according to volume fraction, but the thickness of L and the grass-roots. Lc is the critical toughening the matrix resin, the thickness of its impact energy and absorbed by the surface of rigid inorganic particles can impact the relationship between primary and secondary transition point. When L> Lc, the impact can be assigned according to the volume fraction of resin and inorganic rigid particles.

Therefore, unit volume of its impact on resin can be the same, that same toughness; when L Nanocomposite stiffness and strength increase is due to nano-particle radius, the large surface area, quite a lot of surface atoms, the physical and chemical defects in the surface more easily and the polymer chain for physical or chemical combination, an increase of rigidity, increased strength and heat resistance.
照片
发表评论…

此信息包含附件
ECO Garage Flooring Paint Installation

If you are planning to paint your garage flooring, then you should be prepared for a lot of preparation work before you begin to paint. A large majority of the preparation process involves cleaning your floor until its spotless. Many people's garage floors are filled with oil, grease, dirt, dust, salt, and many other substances so cleaning your floor may take a lot of work. If you decide to clean and paint your floor, then you are saving yourself a lot of time in the future. Garage flooring paint makes cleaning grease and oil spills easy, so when your floor is done, it will look nicer and you don't need to spend a lot of time cleaning your floor.
http://resultkey16.in/
Before you begin to install your paint, you must make all of the preparation requirements are completed. The first step you need to do is see if your garage floor has a sealant applied to it. If your floor is sealed, then ECO paint won't bond to your floor until it is removed. An easy way to check for sealants is to pour water all around your floor and see how long it takes for the concrete to absorb the water. If the water goes away relatively quickly, then there most likely isn't a sealant on your floor. If the water beads out and doesn't get absorbed, then the builders did install a sealant and you need to look at some ways to get it removed.

If sealants are not an issue than you can begin the cleaning processes. You must make sure that all dirt and residue is off of your floor because even the smallest particle of dust can drastically impact the final result. The first thing you should do is give your garage a good sweeping to get rid of the initial dirt, dust and salt. Then you should use a power washer to get the rest of the dirt residue as well as any oil and grease stains that are embedded into your floor. After the power washing your floor should be clean enough to start adding a primer and initial ECO coats.

Most garage floors must have a primer and two coats of ECO for optimum results. Each coat needs around four to six hours to dry so this project could take all day. If you want to use ECO as your garage flooring cover, then you may want to consider hiring a professional. They can save you hours of preparation and they will make sure that the final result comes out exactly how you want it. Professionals will cost you a little more money but if your floor looks better, is better protected, and comes out the way you want it then it may be the best option for you.
发表评论…

此信息包含附件
Enjoy Your Summer With Patio systems
Of course we cannot bolt down and sit inside for couple of months without enjoying the outside world. Decorating your patio helps you to beat down the summer heat and assist you to spend lovely precious time outside as well during those harsh months. See to that you decorate your patio with at most care . Keep it simple; do not crowd your patio area with furnitures. One or two would suffice depending upon your patio area. Have a somekeyword to protect you from the sun. Use patio materials for your couches and other chairs. If you do have a pool in your patio area, it becomes the most perfect setting for you to enjoy the summer. Though, I am aware of the fact that not everyone can afford a pool area in their patio.
somekeyword are quite inexpensive and easy to add to your patio. They do not occupy much space as well. They have the ability to lower the temperature around you by 30 degrees. Being inexpensive equipment, it might turn out to be the best investment you could ever make for your patio area.
The water molecules mingle and attach themselves with the air molecules and in the process it cools the air. And as it cools the air, the water molecules evaporate leaving behind cool air around us. This answers the common question of Why dont people get wet from the mist. The fact is you only feel cool air as water molecules evaporate and not any moisture.
You do not need any pumps or filters and thus it serves as a low volume system. The installation cost is just the cost of length of hoses used and apart from labor charges you should not have any other additional costs. Operational costs are adhered by users to run the equipment when it is on.
Installation is a pretty easy task and thus can be done within few hours. It can be done with the help of experts. However installation procedures are pretty simple and thus anyone could afford to do it on their own as well. Just make sure the system kit contains all the parts, nozzles, and other accessories and you need not have to make several trips to the store for the additional parts. Measure the length of your patio area and amount area that you want to be cooled at all times. Purchase hoses and attach it to the ceiling with the help of brackets. One end of the hoses goes to the garden hose and the other end comes with the nozzles attached and calibrated. Your set up is done with mounting and enclosing the brackets. Now you can enjoy cool summer.
http://harshan.in
发表评论…

此信息包含附件
outdoor composite decking
Gather from: http://woodview.in/
With a great many decking materials, one common factor when thinking about investing in a deck is the amount of maintenance required.
With outdoor composite decking, made from recycled materials, the beauty of this low-maintenance deck is rivalled only by its even, smooth surface. Composite decking has been designed to withstand all of the stresses that are placed upon decks by natural elements such as rain and UV rays as most commercial decking materials are.
Composite decking is also easy to install, requires no staining or sealing, and is easy to keep clean as well. A composite deck means less time working, and more time enjoying the deck.

Pls kindly check below advantages:

Looks and feels like natura& wood .
Durable,anti-impact,weather-proof,with high density.
High capacity of uv-resistance,color stability and impact resistance.
High resistant to moisture and termites.
Easy to be installed and low labor cost.
Required no painting ,no glue,low maintenance.
100% recycled ,environmental friendly,saving forest resources.
Barefoot friendly,anti-slip,no cracking.
Weather resistant,suitable from-40°C to 60°C and anti corrosion.
照片
发表评论…

此信息包含附件
If you are laying laminate flooring over a concrete sub-floor then you will first need to lay down a damp proof membrane (DPM). This is basically a sheet of plastic usually around 5mm which helps protect the Laminate from moisture. On top of this goes the foam underlay this acts as sound absorption and also helps even out minor irregularities in the sub-floor.
http://woodview.in/
照片
发表评论…
正在加载更多信息,请耐心等待