Hintergrundbild des Profils
Profilbild
isel Austria GmbH & Co KG
9 Follower -
+43 (0) 7242 206829 | Subsidiary and customer support of isel Germany AG for Austria and Eastern Europe | info@isel-austria.com
+43 (0) 7242 206829 | Subsidiary and customer support of isel Germany AG for Austria and Eastern Europe | info@isel-austria.com

9 Follower
Über mich
Beiträge

Beitrag enthält einen Anhang
iMC-S8 / Multiple axis controller

- 32-bit RISC processor with Flash memory for user program
Final output stages
- Step resolution and motor current adjustable via variable DIP switch
- automatic current sink
- Acceleration, start-stop frequency and step output frequency variable
- Both hardware limit switches configurable
- Follow up to the controller C-142

The iMC-S8 step controller is a freely programmable compact controller for linear or circular axes with 2-phase step motors.

Tel: +43 (0) 7242 / 206829
Fax: +43 (0) 7242 / 211445
eMail: info@isel-austria.com
Kommentar hinzufügen…

Beitrag enthält einen Anhang
Linear Carriage LWR 6-48 suitable for Linear Rail LSV 6-48

- Aluminium T-Profile, naturally anodized, L 100 / 150 x W 95 x H 14 mm
- 4 precision bores (Ø 6,0 mm)
- 4 special ball bearings Ø 24 mm, hardened and polished
- adjustable free of clearance by eccentric

More information:
https://www.isel.com/en/linear-carriage-lwr-6-48.html
Foto
Kommentar hinzufügen…

Beitrag enthält einen Anhang
Remote - Control software for Windows

Remote is a universal control program for outputting files for machining methods milling, drilling, adhesive bonding, engraving, applying and water jet cutting or laser cutting/welding.

Kommentar hinzufügen…

Beitrag enthält einen Anhang
Aluminium T-slot plates PT 25
- Universal precision, clamping and machining surface
- Aluminium, naturally anodised
- Milled flat on both sides
- For use with any machine
- Thick walled, distortion-free andextremely form-retaining
Kommentar hinzufügen…

Beitrag enthält einen Anhang
Two Phase Stepper Motors MS 135 | 200 | 300 | 600 | 900 HT-2

- Step angle 1.8°, higher resolution through microstep mode
- Very high torque through are earth magnets
- Optimised for use with position controllers

#motor #automation #hightorque #steppermotor
Foto
Kommentar hinzufügen…

Beitrag enthält einen Anhang
EC-Servo motors (with brushless drive)
EC 40 | 60 | 80

Features

- permanently energized 3-phase synchronous motor
- incremental position encoder / encoder integrated in the motor - supply 5VDC, RS422, tracks A, / A, B, / B, Z, / Z,
- integrated commutator signals U, V, W - 5V PUSH / PULL
- applications: positioning controls, CNC controls
- optionally with holding brake
- recommended control electronics see catalog




https://www.isel.com/en/ec-40-60-80-ac-14880.html
Foto
Kommentar hinzufügen…

Beitrag enthält einen Anhang
Customized CNC machine
Kommentar hinzufügen…

Beitrag enthält einen Anhang
Rotary tilting unit DSH-S

With precision transmission
- High load capacity, rigid drive bearing
- Absence of play and high torsional rigidity
- With rotary unit RDH-S
- Reduction 1:51 or 1:101

https://www.isel.com/en/dsh-s.html
Foto
Kommentar hinzufügen…

Beitrag enthält einen Anhang
Looking for a CNC milling machine for large travels with small space requirements?

The CNC Machine is ideally suited for:
- Machining
- Testing and measuring
- Glue dispensing

Benefits

- Optimal use of space
- Free machining area
- Fixed table, mobil portal
- Variable clearance of 340- 590 mm
- Also suitable for a large chip volumes

https://www.isel.com/en/products/systems/cnc-milling-machines/overhead.html
Foto
Kommentar hinzufügen…

Beitrag enthält einen Anhang
CNC Milling Machine
FlatCom M-LES 5 series - with servo motor drive

Ideally suited for long traverse paths

Benefits:

high stiffness with low weight
maintenance-free motors
extensive accessories

Ideally suited for:

multi-shift operation

Machining of:

Aluminium / light metals
plastic
wood
foam
Plexiglas

Kommentar hinzufügen…
Einen Augenblick, weitere Beiträge werden geladen…