Profile cover photo
Profile photo
Walter “Myzhar” Lucetti
204 followers
204 followers
About
Posts

Three thermal videos acquired with the Flir Lepton3 sensor on the BeagleBone Blue for the Lepton3 BeagleBone Blue challenge.
The code is freely available on Github:
https://github.com/Myzhar/Lepton3_BBB

https://youtu.be/x8RtKqNIoiE
https://youtu.be/Yov98Ps2ttc
https://youtu.be/WnkK0AOtyL8

Post has shared content

Post has attachment

Post has attachment
The last weekend, 21-22 May, was held in Rome the annual event dedicated to robotics organized by the no profit association Officine Robotiche. For the third consecutive year I made a simple talk dedicated to artificial vision applied to robotics, to…
Add a comment...

Post has attachment
A simple talk about Stereo Vision #OR16 @OfficineRobotic @NVIDIATegra @stereolabs3D

The last weekend, 21-22 May, was held in Rome the annual event dedicated to robotics organized by the no profit association Officine Robotiche. For the third consecutive year I made a simple talk dedicated to artificial vision applied to robotics, to…
Add a comment...

Post has attachment
Latest news... the project is going on

It’s been a lot since latest post… the project has not stopped, but the time is missing, so blog update is confined into limited time slots. Who follows the news on Twitter, Facebook and Youtube knows that also this year MyzharBot was demoing in the…
Add a comment...

Post has attachment
It’s been a lot since latest post… the project has not stopped, but the time is missing, so blog update is confined into limited time slots. Who follows the news on Twitter, Facebook and Youtube knows that also this year MyzharBot was demoing in the…
Add a comment...

Post has attachment
Two new tutorials for Jetson TX1 and Jetson TK1:
Configurate the Nvidia Jetson TX1 to act as a Wifi Access Point
http://myzharbot.robot-home.it/blog/software/nvidia-jetson-tx1-access-point/
and
Hacking ROS configuration to let OpenCV working correctly with new Computer Vision nodes as Stereolabs zed-ros-wrapper
http://myzharbot.robot-home.it/blog/software/ros-nvidia-jetson-tx1-jetson-tk1-opencv-ultimate-guide/

Post has attachment
Nvidia Jetson TX1 as AP and howto configure ROS-OpenCV @NVIDIATegra @rosorg @Jetsonhacks @raffaello86 @OSRFoundation

Making the final preparations for the participation of MyzharBot-v4 at the next conference GTC 2016 by Nvidia (San Jose, California, APRIL 4-7, 2016), I realized that it would be very helpful to have two guides for the realization of two basic operations…
Add a comment...

Post has attachment
[HowTo] Hacking Jetson TX1 power connector @NVIDIATegra @nvidia @NVIDIA_IT @OfficineRobotic

The power connector of the carrier board of the Nvidia Jetson TX1 is really solid and well done, but the strong vibration of a tracked robot can compromise its stability, so I decided to modify it to be sure that MyzharBot-v4 has a really robust power…
Add a comment...
Wait while more posts are being loaded