Profile cover photo
Profile photo
Trim Solutions, LLC
8 followers
8 followers
About
Communities and Collections
View all
Posts

Post has attachment
#QuickTrim #System by +Trim Solutions, LLC is an #exterior #PVC flat stock board that comes standard with a nailing flange and starter strip, providing the ultimate fastener-free finish for exterior #home trim. Say goodbye to screws and plugs in the face of your board. This is the next generation of hidden fastening - where durability meets style. Learn more: http://quicktrimsystem.com
Photo

Post has shared content
Thank you to +LBM Journal for selecting QuickTrim System as one of their Product Picks for July 2017! Click on the link below to check it out.

Post has shared content
Thank you to +LBM Journal for selecting QuickTrim System as one of their Product Picks for July 2017! Click on the link below to check it out.

Post has attachment
Thank you to +LBM Journal for selecting QuickTrim System as one of their Product Picks for July 2017! Click on the link below to check it out.
Add a comment...

Post has attachment
Add a comment...

Post has attachment
As the spring building season is ramping up (and getting busier by the day), more contractors are choosing to build trim on the job site with #QuickTrimSystem. See how they're saying GOODBYE to nails and plugs in the face of the trim boards here: http://bit.ly/2sLJZkS.
Photo

Post has attachment
As the spring building season is ramping up (and getting busier by the day), more contractors are choosing to build trim on the job site with #QuickTrimSystem. See how they're saying GOODBYE to nails and plugs in the face of the trim boards here: http://bit.ly/2sLJZkS.
Photo

Post has attachment
As the spring building season is ramping up (and getting busier by the day), more contractors are choosing to build trim on the job site with #QuickTrimSystem. See how they're saying GOODBYE to nails and plugs in the face of the trim boards here: http://bit.ly/2sLJZkS.
Photo
Add a comment...

Post has attachment
#QuickTrimSystem can be both edge and face glued. Before gluing, make sure surfaces are clean, dry and smooth enough to make full contact. To prevent separation, joints may be glued using Kleer Cellular PVC Cement or Kleer Cellular PVC Adhesives. These adhesives have limited working time. Clamping both sides of the joint will allow time for the adhesive to fully cure. For a quick cure (7 seconds), use Loctite Super Glue Professional Liquid.
Add a comment...

Post has attachment
Instructions to Install #QuickTrimSystem

1. Cut QuickTrim System board to desired size using a carbide blade. QTS boards should be cut as is, with starter strip and nailing flange attached.

2. Once cut, remove starter strip from the board and fasten starter strip to the solid surface where trim will be applied. Starter strip can be fastened using any standard nail or screw.

3. Slide the QuickTrim System board onto the fastened starter strip.

4. If there are any corners and/or seams, make sure they are glued (see gluing video here: )

5. Fasten the nailing flange to the solid surface with any standard nail or screw. Fasten every 3rd hole of the nailing flange to ensure a proper installation.

www.trimsolutions.net
Add a comment...
Wait while more posts are being loaded