Profile cover photo
Profile photo
Spin Cast Pipe
131 followers -
The "No Dig" solution to fully restore the structural integrity of sub-surface infrastructure.
The "No Dig" solution to fully restore the structural integrity of sub-surface infrastructure.

131 followers
About
Posts

Post has attachment
Custom Fabricated Equipment from JW & Associates USA
Spin Cast Pipe Sled System

Often, Culvert rehabilitation does present difficult conditions. Whether its limited access or confined workspace, in both cases our Spin Cast Sled System is designed for adjusting and assembly without the need for hand tools.

Read More => https://goo.gl/oxBVp2
Add a comment...

Post has attachment
CULVERT REMEDIATION WITH SPIN CAST CEMENT
Spin Applied Cement reduces CMP Pipe diameter, however, the Increase to Flow Velocity Brings a Boost In Water Flow Volume!

How Does This Happen?
• Manning N-Values Reflect Much Greater Friction in CMP Pipe.
• The Much Lower Manning N-Values of Finished Cement Yields Increase in Water Flow Volume as a result of Higher Water Flow Velocity.

Read More =>https://goo.gl/1miAGC

#NoDig
#SPINCASTPIPE #trenchlesssolutions #cementculvertrelining #spincastpipe #stormculvertrehabilitation #culvertrehab #structuralsolutions #waterculvertrehab
Add a comment...

Post has attachment
SPIN CAST PIPE – A “No Dig Solution”
Generating Full Structural Renewal of Storm Water Culverts. Our primary Methodology involves Centrifugal application of High Strength Cement, restoring Long-Term Service Life.

“NO DIG SOLUTIONS” means:
• Avoiding open cut Highways & Disturbance of Traffic Flow.
• Avoid costly pipe Replacement & Gain huge budget savings.
• Achieve Long-Term Service Life & Full Structural Renewal.
• Eliminate the Liabilities & Headaches of Excavation.

Read More => https://goo.gl/etJNcu

#NoDig
Add a comment...

Post has attachment
Check out our work in the Town of Malabar!

Serving as the sole access for homeowners to 43 upscale waterfront residences, the Malabar Town council quickly ruled against replacement construction. Any procedure involving excavation would have drastically altered the lives for the homeowners in Country Cove. So, we used our our Cast-In-Place procedure to install two individual Arch shape CMP Culverts measuring 83” x 128”.

#NoDig

Post has attachment
Check out our work in the Town of Malabar!

Serving as the sole access for homeowners to 43 upscale waterfront residences, the Malabar Town council quickly ruled against replacement construction. Any procedure involving excavation would have drastically altered the lives for the homeowners in Country Cove. So, we used our our Cast-In-Place procedure to install two individual Arch shape CMP Culverts measuring 83” x 128”.

#NoDig  


Post has attachment
Spin Casting is the latest in remediation technology for medium to large diameter storm water infrastructure.

This straight forward Cast-In-Place culvert renewal method has been developed to accomplish these critically important factors.
1) avoid excavation
2) achieve the desirable long-term service life that was formerly associated with high-cost replacement construction.

#infrastructure #Construction  

Post has attachment
New construction excavation and replacement of sub-surface structure presents the headache of M.O.T. lane closure. When the resulting traffic detour is just not feasible, that's where we come in.
Add a comment...

Post has shared content
A circle of engagers worth following!
This is my TEAM ELITE ENGAGER CIRCLE FUCHSIA EDITION

As it has been some time since I posted a #teamelite circle, my   #teamelite circles have a Colourful theme this time, so they are named Crimson and Fuchsia. You'll notice there are only two of them this time, as I am now making sure everyone has added me before I share them.

*     #teamelite  members - see nearer the end for instructions for the next stage!     #eliteinnercircle *

I have had so many great     #teamelite  engagers that I need two whole circles - why are they     #teamelite  engagers, as opposed to normal engagers? These are the ones who have shared my shared circles - you have close to 1,400 circle sharers here for you to add across these three circles. You should add people in these circles, because they are active engagers and will brighten up your Google Plus experience. I'm not sure you could handle all that Google Plus engagement, so think twice before you do so!

My     #teamelite  circles are extensively shared by the top circle sharers on Google Plus, so naturally, membership of     #teamelite  is very exclusive and there is a lot of demand to get in.

To get in, and to ensure you stay in     #teamelite  you need to do the following:

1. Add me to your circles, if you haven't done so already
2. +1 this circle
3. Publicly share this circle to public, your circles and extended circles.
4. If possible, leave a comment on this circle so I know you have done the three steps above (I say "if possible" as my circle comments more often than not hit the 500 comment limit).
5. So I can easily find your share, always publicly share my original shared circle. You'll know if you're sharing the original one because you won't see "Jason Levy originally shared" above here. If you do see it, click on "originally shared" and it will bring you to this post.
6. You need to share within 5 days of when the circle was published, as I publish my #teamelite circles weekly, and they take me a day or so to curate. Otherwise it may be two weeks before I pick up your share and you get added to the circle again. This is especially true for my #eliteinnercircle . Therefore, for the best results if the circle is more than a week old, you should share my latest #teamelite and #eliteinnercircle circles, which you can find on my profile page at: https://plus.google.com/+JasonLevy/posts

BE THE BEST OF THE BEST:
To get into my     #eliteinnercircle  you need to share my Crimson and Fuchsia   #teamelite  circles, as well as my current   #eliteinnercircle circle. You can find them here:

Elite Inner Circle: https://plus.google.com/112133840926710963547/posts/SbfXYG6b64C
Team Elite Engager Circle Crimson Edition: https://plus.google.com/112133840926710963547/posts/dzU1RdCzxAh
Team Elite Engager Circle Fuchsia Edition: https://plus.google.com/112133840926710963547/posts/UmdDDNVLEqT

#circleshare       #circlesharing       #sharedcircles   #sharedpubliccircles       #publiccircle       #teamelitecircle   #teameliteengagercircle     #dontconfusethecircles  

~@~@~@~@~@~@~@~@~@~@~@~@~@~@~
I don't wish to offend anyone on the internet, so if you would like to be removed from my shared circles, please send me a private message and I won't share your profile in the future. The only way being shared will affect you is that you will get notifications that people have added you. You are under no obligation to add them back to your circles. If you don't add them back, they will most likely remove you from their circles after some time.
~@~@~@~@~@~@~@~@~@~@~@~@~@~@~

Many people are hesitant to deal with their hearing loss, because they feel that hearing aids are bulky and unsightly. However, for several years we have been able to offer "invisible in the canal", or "iic" hearing aids, and our selected manufacturers continue to strive to make them smaller and smaller. These iic hearing aids are smaller than the previously available "completely in the canal" or "CIC" models. At London Hearing Aids, we offer the finest selection of Invisible Hearing Aids from Oticon, Starkey, Phonak, Unitron, Siemens and ReSound, namely the Oticon iic, Starkey Soundlens, Phonak nano, Unitron micro, Siemens iMini and ReSound Verso iic. You can find out more about them here: http://www.londonhearingaids.co.uk/Invisible/invisible-hearing-aids-call-0203-397-9787-nano-iic-micro-soundlens.html
Add a comment...

Post has attachment
Welcome to Spin Cast Pipe!

Our focus is sub-surface infrastructure. Consider the following four fundamental principals of "No Dig" solutions.

1.Avoiding MOT will simplify logistics, while reducing your costs and shortening the project duration.

 2.“No Dig Solutions” avoid utility relocation, often the largest expense, presenting huge liability exposure to a single line item in new replacement construction.

3.The combination of technology, skilled procedure and High-Strength Cement Materials offer results on par with new replacement construction. (Service Life)

4.All of these add up to Cost Savings, which help you maximize allocated maintenance budgets and expedite your collective list of Capital Improvement Projects.

#NoDig #Trenchless  
Add a comment...
Wait while more posts are being loaded