Profile cover photo
Profile photo
No Strings Attached Show
53 followers -
Networking Without Strings
Networking Without Strings

53 followers
About
No Strings Attached Show's posts

Post has attachment
Recently NETSCOUT released the long awaited update to the [Fluke] AirCheck product line and it’s an awesome update! Now we’ve done a couple of tool posts in the past about why you need this and what it does but nothing really compares to the flexibility…

Post has attachment
We are heading back to WLPC on this episode of the NSA Show. We recorded this live at WLPC with our guests Lee Badman, Keith Parsons, Mike Leibovitz, and Jake Snyder. We talked about building communities, analytics, and white label APs/controllers.

Post has attachment
E59 - Cisco XOR Radios (Sponsored) #WLPC

Welcome to the 2nd episode of the 2 part series on the new Cisco 3800 & 2800 access points. On todays show we are talking again with Mark Denny & Brian Levin but this time we add in Jim Florwick. Jim is one of the most entertaining speakers from Cisco…

Post has attachment
Are you a @Netscout Runner or Sprinter?

Alright, the name of the show is “No Strings Attached” because well we are wireless so we don’t need strings right? Sort of, we do need at least 1 “string” and that is the one connected to our access point. While we have focused a lot on the tools needed…

Post has attachment
As a wireless engineer we are always looking for new ways to “peek” into the RF and see what is going on. Sometimes though you may not want to boot up your laptop, get your adapters out, etc, just to take a quick look if say for example you are on a…

Post has attachment
Digging deep into the Stefanick archives of real world 802.11 issues. I challenge YOU with 4 real world examples. Keep in mind sometimes the obvious is not so obvious. While frames don’t lie understanding 802.11 is important to see the truth. These are…

Post has attachment
1) CRC is cyclic redundancy check. This means a radio received a frame and failed the checksum. A normal communication the intended receiver will not ACK and the sender will retransmit the frame. What’s important to understand when sniffing just because…

Post has attachment
Welcome to this first part of a two part series on the new Cisco 3800 and 2800 series access points. Today we talk with Mark Denny and Brian Levin, product managers for the two new access points. This first part of the series is an introduction to the new…

Post has attachment
Welcome to a very special episode of the NSA Show. On this episode we are joined by Ryan Adzima (@radzima) from Whiskey and Wireless as well as Stew Goumans (@wirelessstew) to discuss a bunch of different topics. This episode was recorded back at the…

Post has attachment
802.11 – Reason Codes and Status Codes  The 802.11 standard section 8.4 comments on reason codes and status codes. I’ve used these myself when troubleshooting frame captures. These codes provide insight to Wi-Fi related problems like stations connecting…
Wait while more posts are being loaded