Profile cover photo
Profile photo
Luís Leão
2,870 followers -
criador do @sms2blog, quase blogueiro e apaixonado por novas tecnologias
criador do @sms2blog, quase blogueiro e apaixonado por novas tecnologias

2,870 followers
About
Luís's posts

Post has shared content
3D Printed Birdhouse that looks like a Fire Hydrant
https://blog.adafruit.com/2015/12/31/3d-printed-birdhouse-that-looks-like-a-fire-hydrant/

Jin Lee shared on Thingiverse:

Fire Hydrant Birdhouse

This is a fire hydrant birdhouse with 1-5/8″ diameter entrance. I added several drain holes on the floor and added holes in center of the three nuts to act as ventilation. A hole was also added at the bottom of entrance hole to minimize water funneling into the birdhouse.

I added chain links to the nuts around the fire hydrant for some realism as well as using real bolts to bolt the top to the body (I used M6 socket cap head screws instead of hex head bolts which would be better. Its what I had laying around the house). M6 or 1/4″ bolts will work.

Super glue was used for the birdhouse, I also super glued middle of the chain to the body of the birdhouse. I noticed the chain hitting the birdhouse made quite a noise, I’m assuming birds wouldn’t like it so much.

Read more https://blog.adafruit.com/2015/12/31/3d-printed-birdhouse-that-looks-like-a-fire-hydrant/
Photo

Post has shared content

Post has shared content

Post has shared content
My friend Tony likes to drink, and drinks made by an Arduino taste better.

Post has shared content
This post is about how to measure the temperature with the #arduino  without an external sensor.

Post has shared content

Post has shared content
Hadrian’s Wall Segment Reconstructed with #LEGOs #ArtTuesday
https://blog.adafruit.com/2015/10/20/hadrians-wall-segment-reconstructed-with-legos-arttuesday/

This project is incredible! From Kotaku via My Modern Met:

British collective Brick to the Past built a historical LEGO display that’s probably one of the largest ever made. It’s a recreation of Hadrian’s famous wall at Rome’s northern frontier.

Read more
https://blog.adafruit.com/2015/10/20/hadrians-wall-segment-reconstructed-with-legos-arttuesday/
Photo

Post has shared content

Post has shared content
Another must see presentation by +Addy Osmani on the never ending stream of improvements in Chrome DevTools! I'd list some recent favorites... but there are just too many!

Post has shared content
An Elegant Kinetic Sculpture by Derek Hugger that Mimics the Flight of a Hummingbird #ArtTuesday
https://blog.adafruit.com/2015/10/20/an-elegant-kinetic-sculpture-by-derek-hugger-that-mimics-the-flight-of-a-hummingbird-arttuesday/

Beautiful work from Derek Hugger, via Colossal.

Containing over 400 precisely machined gears, screws, and aesthetic elements, Derek Hugger’s latest kinetic sculpture Colibri mimics the motion of a hummingbird in flight. Though the motions of flying are unmistakable, the piece has much more in common with a clock than a bird.

Read more
https://blog.adafruit.com/2015/10/20/an-elegant-kinetic-sculpture-by-derek-hugger-that-mimics-the-flight-of-a-hummingbird-arttuesday/
Animated Photo
Wait while more posts are being loaded