Profile cover photo
Profile photo
Leact Security Services Pty Ltd
2 followers
2 followers
About
Posts

Post has attachment
Data Cabling | MDF Jumper | IT Network
Call on 0488 033 022 or http://www.leact.com.au
Photo

Post has attachment

Security System, DATA Cabling, MDF Jumper or IT Network, Need Help?

Call on 0488 033 022 or www.leact.com.au

ALL ENQUIRIES MUST INCLUDE A CONTACT NUMBER AND ADDRESS

Installation and service of security system, such as alarm, cctv, access control, intercom and data cabling on sites like unit, apartment, house, shopping centre, supermarket, office building or warehouse etc.

ALARMS | CCTV | ACCESS CONTROL | INTERCOM | ELECTRIC LOCK
DATA CABLING | MDF JUMPER | PHONE LINE INSTALLATION
IT NETWORKING | ADSL VDSL NBN WIFI SETUP

※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※
SAFETY AND SECURITY TIPS
A security alarm company identification card or valid security licence shall be produced to the client upon request.
Be wiser to choose licensed business registered with victoria police.
Verify here☞ http://www.Police.Vic.Gov.Au/content.Asp?Document_id=109.
PLEASE SHARE WITH ANYBODY WHO IS INTERESTED, THANKS.
※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※
Photo

Post has attachment
Security system, Data cabling, MDF jumper or network, need help?
Call on 0488 033 022 or http://www.leact.com.au
Installation of security system, such as alarm, CCTV, access control, Intercom and data cabling on sites like unit, apartment, house, shopping centre, supermarket, office building or warehouse etc.

Alarms | CCTV | Access Control | Intercom | Electric Lock | Data Cabling | MDF Jumper | Phone Line Installation | Computer Networking

※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※
SAFETY AND SECURITY TIPS
A security alarm company identification card or valid security licence shall be produced to the client upon request.
Be wiser to choose licensed business registered with Victoria Police.
Verify online now >>> http://www.police.vic.gov.au/content.asp?Document_ID=109.
Please share with anybody who is interested, thanks.
※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※
Photo


Why should I have a smoke alarm?

If you don’t have a working smoke alarm installed in your home, and a fire occurs:

You are 57 per cent more likely to suffer property loss and damage
You are 26 per cent more likely to suffer serious injuries
You are four times more likely to die
Smoke Alarm

When you’re asleep you lose your sense of smell. A smoke alarm is your electronic nose. It will alert you if there is smoke from a fire. A small fire can grow to involve an entire room in two to three minutes. A smoke alarm provides early warning and time to escape.

Smoke alarms are compulsory in every home.

Since 1 August 1997, Victorian law states that smoke alarms (complying with Australian standards AS 3786) must be installed in all homes, units, flats and townhouses. It is the legal responsibility of all owners and landlords to install working smoke alarms.

Residential homes constructed before 1st August 1997 need only 9 volt battery powered smoke alarms installed. Residential homes constructed after 1st August 1997 must have smoke alarms connected to 240 volt mains power. In addition a backup battery must be installed in the smoke alarm.

All fire services in Australia recommend photo-electric smoke alarms when installing or replacing existing smoke alarms. Smoke alarms need to be maintained in accordance with the manufacturers specifications.

All smoke alarms:

Must contain a battery
Need to be tested regularly
Need to be replaced after 10 years
Locating a smoke alarm

Smoke alarms must be located between each bedroom area and the rest of the house.
In addition inside any bedroom where someone sleeps with the door shut
In a two storey home a smoke alarm is required on every storey, located in the path that people will use to evacuate
Note: Cooking fires are common. High ceilings or the layout of your house may increase the time it takes for your smoke alarm to operate. Consider installing a photo-electric smoke alarm closer to the kitchen area.


Testing and Maintenance

Smoke alarms should be tested regularly

Monthly: Test by pressing the test button with a broom handle
Yearly: Vacuum around your smoke alarm vents
Yearly: Replace your 9 volt battery each year at the end of daylight saving
Remember all smoke alarms need to be replaced after 10 years. When replacing an existing nine volt battery smoke alarm consider installing a photoelectric smoke alarm with an inbuilt ten year lithium battery. This will eliminate the need to change the battery every year.

The MFB’s campaign at the end of daylight saving each year reminds people to:

"Change your clock; change your smoke alarm battery"

If the Residential Tenancy Act 1997 (RTA) applies to residential premises, the landlord is not only responsible for the installation of a smoke alarm but also its ongoing maintenance as per section 68(1) of the RTA Landlord's duty to maintain premises:

"A landlord must ensure that the rented premises including fixtures and fittings provided by the landlord at the rented premises are maintained in good repair."

It is the tenant’s responsibility to:

Test the smoke alarm every month to make sure it is working
Contact their agent/Landlord if the smoke alarm is not working
Contact their agent/landlord if the smoke alarm omits an occasional chirping noise as the battery or smoke alarm is faulty
Smoke alarm subsidy for people who are deaf or hard of hearing.

A specialised smoke alarm is available for people who are deaf or hard of hearing. Due to the cost of this type of smoke alarm, the Department of Human Services provides assistance via a subsidy.

For more information go to Vicdeaf Smoke Alarm Subsidy

For further general information please contact the Community Resilience Department on (03) 9665 4464 or commres@mfb.vic.gov.au

http://www.mfb.vic.gov.au/Community-Safety/Home-Fire-Safety/Smoke-Alarms.html

Post has attachment
About the Do Not Call Register

Information about the Do Not Call Register, the services it offers and who uses them.

What is the Do Not Call Register?

The Do Not Call Register is a secure database where individuals and organisations can register, check or remove their Australian telephone, mobile and fax numbers to opt out of receiving most unsolicited telemarketing calls and faxes.

Registration is free and you only need to do it once.

Once registered, a number will stay on the register indefinitely unless the number owner or their representative removes the number.
Do Not Call Register
Do Not Call Register
donotcall.gov.au

Post has attachment

Post has attachment
To secure your domestic and commercial premises with the electronic security system, get a free quote on 0488 033 022 at www.leact.com.au.

Alarms | CCTV | Access Control | Intercom | Data Cabling | MDF Jumper | Phoneline Installation | Computer Network

BE WISER TO CHOOSE LICENSED BUSINESS REGISTERED WITH VICTORIA POLICE

Verify Online Now >>> www.police.vic.gov.au/content.asp?Document_ID=109
Photo

Post has attachment
Alarms | CCTV | Access Control | Intercom | Data Cabling
MDF Jumper | Telephone Line Installation | Computer Network

> Installation or Services
> Please Call ☎ 0488 033 022 Now!
> A service call would also be available.
> Please share with anybody who is interested,Thanks🙏
http://www.leact.com.au
____________________________________________
BE WISER TO CHOOSE
Verifying Licensed Business
http://www.police.vic.gov.au/content.asp?Document_ID=109
Please share with anybody who is interested.
Thanks
Photo

Post has attachment

Alarms | CCTV | Access Control | Intercom | Data Cabling | MDF Jumper | Telephone Line Installation | Computer Network
Installation or Services
Please Call ☎ 0488 033 022 Now!
A service call would also be available.
Please share with anybody who is interested,Thanks🙏
http://www.leact.com.au/
Thanks
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
BE WISER TO CHOOSE
Verifying Licensed Business
http://www.police.vic.gov.au/content.asp?Document_ID=109
Please share with anybody who is interested.
Thanks
Photo

Post has attachment
Wait while more posts are being loaded