Profile

Cover photo
John Schneider
Works at Fargo 3D Printing
Attended North Dakota State University
Lives in Fargo, ND
310 followers|334,768 views
AboutPostsPhotosYouTube+1'sReviews

Stream

John Schneider

Found a deal  - 
 
I had a vendor reach out to me with a good sized lot of NEMA 17 motors. Specifically these two motors:

Minebea/NMBTechnologies 17PM-K077BP01CN
Minebea/NMBTechnologies 17PM-K374BN01CN

Are these any good for building 3D printers?
1
John Schneider's profile photoJeff DeMaagd's profile photoRyan Carlyle's profile photo
8 comments
 
They would be good if you want low-speed motion without a lot of power draw, like a security camera or something. 
Add a comment...
 
Robo 3D co-founder Braydon Moreno talks about their upcoming machines and how they were able to turn a KickStarter project into a product that is in big-box retail stores like Best Buy.

https://www.youtube.com/watch?v=5vm3B333YDc
7
1
Denys Dmytriyenko (denix)'s profile photo
 
Love my R1 Kickstarter edition!
Add a comment...
 
Curious about the +Raise3D com #3dprinter? We were too! We had a chance to interview part of the team making the machine a reality. #3dprinting

https://www.youtube.com/watch?v=obMlGMGSMYY
6
Evan Nguyen's profile photo
 
My N2+ is on a boat heading to Los Angeles.
Add a comment...

John Schneider

Shared publicly  - 
 
I had an opportunity to interview Jonathan Jaglom, the CEO of MakerBot®. We talked about some of the pain points MakerBot experienced in 2015 and what their plans are for 2016. We also talk about a new improvement to the Smart Extruder, the Smart Extruder+.   

What do you think? Is MakerBot on the right path?

#3dprinting  
1
Add a comment...

John Schneider

Show-n-tell  - 
 
I had an opportunity to interview Jonathan Jaglom, the CEO of MakerBot®. We talked about some of the pain points MakerBot experienced in 2015 and what their plans are for 2016. We also talk about a new improvement to the Smart Extruder, the Smart Extruder+.   

What do you think? Is MakerBot on the right path?
4
Aria C Bramanta's profile photoNathan Walkner's profile photo
11 comments
 
+Aria C Bramanta i have 1 ramps and the touch screen/arm one is called the cbd chitu (mine came from aliexpress).  it works pretty well, i've had it up to 200mm/sec on a corexy setup
Add a comment...
 
Just launched a professional grade purge material via a partnership with Dyna-Purge and my company, +3Dom USA  : https://www.youtube.com/watch?v=srYF4llmE_4
7
1
Kenneth Cummings's profile photoNathan Walkner's profile photomarc kerger's profile photoVaughan Lundin's profile photo
6 comments
 
Interesting comments , I never really worry about purging my hotend.
Add a comment...
In his circles
337 people
Have him in circles
310 people
Nate Mattison's profile photo
Salesforce Marketing Cloud's profile photo
Naren p's profile photo
Matthew McGarry's profile photo
Jason “Fargonaut” Bye's profile photo
Joel Gifford's profile photo
Maria Schneider's profile photo
Adam Barnes's profile photo
Corey Trick's profile photo

Communities

15 communities

John Schneider

Found a deal  - 
 
We have introduced a "basics" line of PLA filament. Pure, virgin PLA with diameter and ovality tolerances of +/- 0.05mm. There's just a very basic set of colors (natural, white, black, blue, yellow) but that's how we are able to keep the costs down.

These are full, 1kg spools for $26.95.

http://www.fargo3dprinting.com/product-category/filament/pla-filament/
2
1
Add a comment...
 
We just launched Entwined Hemp Filament! It's the first commercially available filament made from hemp. It will be able to be printed on any 3D printer capable of printing in PLA. #hemp #3dprinting

https://www.youtube.com/watch?v=1-gjJRsLDP0
2
Add a comment...
 
An update on the CubeJet full color 3D printer that was announced by +3D Systems at CES 2014. I had a chance to talk with the Product Manager, Tara Anderson about where it's at and when we can expect to see it released.

It was nice to see it actually running at this show, last year it was just an empty shell.

https://www.youtube.com/watch?v=yAHw1DONL3I
4
Paul Gross's profile photoNathan Walkner's profile photoDaniel Kruger's profile photoJohn Schneider's profile photo
5 comments
 
Unfortunately no. I think that was the night of the 3D Hubs meetup.
Add a comment...

John Schneider

Discussion  - 
 
I had an opportunity to interview Jonathan Jaglom, the CEO of MakerBot®. We talked about some of the pain points MakerBot experienced in 2015 and what their plans are for 2016. We also talk about a new improvement to the Smart Extruder, the Smart Extruder+.  

What do you think? Is MakerBot on the right path?
4
1
Add a comment...

John Schneider

Shared publicly  - 
 
Can 3D Systems turn their ship around?

3D Systems is a company that has so much mismanaged potential. After 12 years at the helm, Avi Reichental has stepped down. One of the leading hype-masters of 3D printing, Avi oversaw the share price rise to an overvalued $96.42/share before plummeting to its current price of $8.96.

How did this happen? Through a massive series of acquisitions followed by poor integration into 3D Systems as a result of mismanagement. Jake Clark and I dive into some of the pitfalls 3D Systems has encountered, as well as offering predictions of the company's fate.

https://www.linkedin.com/pulse/can-3d-systems-turn-ship-around-john-schneider
1
Add a comment...

John Schneider

Show-n-tell  - 
 
We just released a new 3D printing material made from coffee!
https://www.youtube.com/watch?v=kY5equ2yxFM
13
4
Paul Gross's profile photoNicholas “ScarabCoder” Harris's profile photoJeff DeMaagd's profile photoJohn Schneider's profile photo
18 comments
 
+Jeff DeMaagd We are working with Filabits.com to offer smaller quantity samples. They don't have Wound Up in stock yet, but should be adding it to their site in the next week or so: http://filabits.com/product-category/filaments/
Add a comment...
People
In his circles
337 people
Have him in circles
310 people
Nate Mattison's profile photo
Salesforce Marketing Cloud's profile photo
Naren p's profile photo
Matthew McGarry's profile photo
Jason “Fargonaut” Bye's profile photo
Joel Gifford's profile photo
Maria Schneider's profile photo
Adam Barnes's profile photo
Corey Trick's profile photo
Communities
15 communities
Education
  • North Dakota State University
    Marketing, 2008 - 2012
  • Morris Area High School
Basic Information
Gender
Male
Story
Tagline
Founder of MELD Workshop, technology fiend, lover of good food and beer, recent graduate who's trying to find his place in the world.
Bragging rights
Founder of MELD Workshop, a makerspace in Fargo, ND.
Work
Occupation
I look at complex technologies and data and find a business application for them.
Employment
  • Fargo 3D Printing
    President, 2013 - present
  • Sundog
    Associate Insights Analyst, 2013 - present
  • Sundog
    Analyst Intern, 2012 - 2012
  • Arctic Audio
    RTI Programmer, 2010 - 2012
  • Target Corporation
    Sales Floor Associate, 2008 - 2010
  • Schneider Family Lawn Service
    Lawn Tech, 2005 - 2009
Places
Map of the places this user has livedMap of the places this user has livedMap of the places this user has lived
Currently
Fargo, ND
Previously
Fargo, ND
John Schneider's +1's are the things they like, agree with, or want to recommend.
Welcome To Fargo - America's Town For Entrepreneurs | LinkedIn
www.linkedin.com

Welcome to Fargo!Our winters might be cold, but our support for entrepreneurs is second to none.You may have heard that even during the mids

WidgetCare Warranties for Fargo3DPrinting - 3D Printing Industry
3dprintingindustry.com

3D printing company and MakerBot retailer Fargo 3D Printing has begun offering WidgetCare extended warranties, service plans and phone suppo

Meetupery Inc
plus.google.com

A space in Waukesha County for coworking, meetups, making/hacking, entrepreneurs & creatives.

$25 For One Month Membership to MELD Workshop ($59 Value) - Includes FRE...
www.savecoin.com

Limit 2 per person, plus 2 as gifts; Limit 1 per membership; Promotional Value expires 7/7/14; Paid value does not expire; Not redeemable fo

The FLIR ONE Case Gives Your iPhone Thermal Vision | TechCrunch
techcrunch.com

The FLIR ONE iPhone case significantly ups the imaging powers of your iPhone 5 or 5S, making it into a thermal imaging camera that lets you

Technology meets art: MELD studio opens creative possibilities | INFORUM...
www.inforum.com

FARGO – At first glance, MELD Workshop probably looks more like a laboratory or small-scale factory than anything else.

United States Postal Service
plus.google.com

United States Postal Service hasn't shared anything on this page with you.

Digital Analytics Fundamentals - Course
analyticsacademy.withgoogle.com

Digital Analytics Fundamentals. This three-week course provides a foundation for marketers and analysts seeking to understand the core princ

Data at your fingertips: A new version of the Google Analytics App for A...
analytics.blogspot.com

At Google, we want to build tools that help you stay connected no matter where you are. Whether you're in the boardroom, at a live event, or

"What Does The Fox Say?" Coffee Mug - MELD Workshop
fargo-makerworks.myshopify.com

This laser engraved mug will have your friends and coworkers asking you "What does the fox say?". Little do they know, you have a cheat shee

Bostan - Retina Responsive Multi-Purpose Theme
themeforest.net

Version 1.1 – See changelog at at the bottom of the page. If you have some troubles customizing the theme, please visit the F.A.Q section he

GLASSTESLA Lets Google Glass Owners Control Their Teslas Like Futuristic...
techcrunch.com

Do you have Google Glass? Do you also have a Tesla? Yes? Seriously? Who the hell are you, Batman? Anyway — there's now an application that l

The Verge
plus.google.com

The Verge brings you the best in technology news with in-depth reporting, the latest scoops, original features, and editorials from the smartest team in tech writing.

3D Image Live Wallpaper
market.android.com

Features: • Creates 3D effect from any image • Includes high resolution Jelly Bean 4.2 wallpaper pack • Efficient OpenGL hardware accelerate

Fargo Makerworks - A Makerspace
www.indiegogo.com

Fargo Makerworks is like a gym membership, but instead of treadmills and weights, there's 3D printers, laser cutter and engravers, CNC machi

Dubstep : Digitalchord - Galaxy Mask (Schroff &. Jan Waterman Remix)
www.youtube.com

Follow facebook ●Schroff : http://www.facebook.com/schroffmusic Website : http://www.demondub.co.uk/ ●Jan Waterman : http://www.facebook.com

RepRap Magazine
plus.google.com

Practical exploration of 3D printing.

Samsung's Smart Evolution Kit HDTV upgrade add-on ships in May for $299
www.theverge.com

At CES in January, Samsung announced its "Smart Evolution Kit," an innovative hardware add-on that would allow owners of select 2012 HDTV mo

HD Widgets
market.android.com

Ready for Jellybean! . "Android users swear by the HD Widgets app" - The Guardian "Amazingly awesome and beautiful" - Android Community "ele

Cheap, I guess. Run down and dirty.
Public - 6 months ago
reviewed 6 months ago
1 review
Map
Map
Map