I am having trouble programming the Alamode. I have completed installation and configuration (resolving some issues others have had). Got the board showing up as well as the port.

My problem: I can't send the simple "blink" sketch. I have tried 115200 baud as well as 57600. Both fail with the same error. Here are my verbose output from both attempts.

Binary sketch size: 1,056 bytes (of a 32,256 byte maximum)
/usr/share/arduino/hardware/tools/avrdude
-C/usr/share/arduino/hardware/tools/avrdude.conf -v -v -v -v
-patmega328p -calamode -P/dev/ttyS0 -b115200 -D
-Uflash:w:/tmp/build18792512809611433.tmp/Blink.cpp.hex:i

avrdude: Version 5.11svn-20111019, compiled on Feb 15 2015 at 18:22:47
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch

System wide configuration file is
"/usr/share/arduino/hardware/tools/avrdude.conf"
User configuration file is "/home/pi/.avrduderc"
User configuration file does not exist or is not a regular
file, skipping

Using Port : /dev/ttyS0
Using Programmer : alamode
Overriding Baud Rate : 115200
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding

And then at 57600 baud attempt result

Binary sketch size: 1,056 bytes (of a 32,256 byte maximum)
/usr/share/arduino/hardware/tools/avrdude
-C/usr/share/arduino/hardware/tools/avrdude.conf -v -v -v -v
-patmega328p -calamode -P/dev/ttyS0 -b57600 -D
-Uflash:w:/tmp/build3446814886307353351.tmp/Blink.cpp.hex:i

avrdude: Version 5.11svn-20111019, compiled on Feb 15 2015 at 18:22:47
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch

System wide configuration file is
"/usr/share/arduino/hardware/tools/avrdude.conf"
User configuration file is "/home/pi/.avrduderc"
User configuration file does not exist or is not a regular
file, skipping

Using Port : /dev/ttyS0
Using Programmer : alamode
Overriding Baud Rate : 57600
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding

I am out of ideas. Anyone have any ideas of what to try next?

Thanks!
Shared publiclyView activity