Profile cover photo
Profile photo
Costantino Bongiorno
maker @ WeMake.cc @ MakerFaireRome @ Officine Arduino · milan · bongiorno.co
maker @ WeMake.cc @ MakerFaireRome @ Officine Arduino · milan · bongiorno.co
About
Costantino's posts

Post has attachment

Post has attachment
Giovedì 22 dalle 19 alle 22 abilitazione Fresa CNC con #ShapeOko + #Easel
per chi vuole cimentarsi con le tecnologie sottrattive #digitalfabrication #CNC
(passate la voce e scriveteci a hello@wemake.cc per confermare la vostra presenza!) a +WeMake :)
Photo

Post has shared content
This is not a technical application but a way to create paper models. So it may be useful in education and in low budget projects. Its a motivating task to teach children the use of the draft Workbench.
To unfold a wedge (truncated pyramid) I Draft::downgrade it into faces. Now the faces must be rotated along their edges. Because Draft::rotation always runs with an axis perpendicular to the work plane I have a macro to align the view parallel to a selected edge. After re adjusting the view I set the work plane to the current view. Sometimes the rotation does not snap. So I work with two rotations. First onto the next face (this works always). And then 180° outside this face. After every rotation I compound the result with the next face. At the end the model is completely unfolded and can be printed.

Post has attachment
Oggi alle 14 Abilitazione alla Lasercut
per svoltarsi i regalini di natale #diy #fabbing #makers


http://wemake.cc/membership/

Post has attachment
Vi invitiamo venerdi’ 28 dalle 18.30 all’aperitivo in salsa maker per fare quattro chiacchiere e presentarvi le nuove avventure in corso.

Post has attachment
Ogni stampante 3d hackerata accompagnata dal suo possessore e’ benvenuta.

Post has attachment
Stasera alle 19 c'è l' AUG - Arduino User Group and Wearable 
‪#‎arduino‬ 
https://groups.google.com/forum/#!forum/milano-aug

a WeMake http://wemake.cc/dove-siamo/

Post has attachment

Post has shared content

Post has shared content
PRESENTAZIONI 18 GIUGNO 2014


Via Pasubio 14 – Milano c/o Spazio Yatta

Federico di Girolamo, Giorgio Forti e Marta Lo Bianco presentano Chocomatica
Una macchina che controlla il temperaggio del cioccolato per l’auto produzione di tavolette di qualità.

Paolo Mauri presenta Wiild
La lavagna interattiva open source e a basso costo per le scuole.

Serpica Naro presenta di Oknit.me
Il software open source per realizzare facilmente schede perforate per le macchine da maglieria a partire da un’immagine a due colori e con l’aiuto di una plotterina o la lasercut
Wait while more posts are being loaded