Profile cover photo
Profile photo
Bray Plastics
10 followers -
Engineering in Plastics
Engineering in Plastics

10 followers
About
Posts

Post has attachment
Take The Hassle Out Of Sourcing Enclosures

Sourcing suitable electronic and electrical enclosures, particularly in low volume can be a tedious task. Add to that a customising requirement by modifying those enclosures to suit specific applications then an already onerous task has also become a daunting one.

Bray Plastics can both machine standard off-the-shelf enclosures from the major manufacturers like Boss, Hammond, OKW/Rolec, Teko, Spelsberg, Pheonix Meccano, Fibox, Ensto and Multi Box as well as design and fabricate speciality enclosures that are customer specific and totally bespoke.

Using a variety of materials eg. ABS, PC, PP, Acetal etc., we have the capacity to design and manufacture to your requirements.

Should the production volumes increase we can also advise, design and supply injection moulded versions of the fabricated original.

If you have an enclosure issue, even if we can’t help directly, Bray Plastics could give you valuable unbiased advice, so give us a call.
Add a comment...

Post has attachment
Plastic Fabrication For Your Industry

EPS (Expanded Polystyrene) and EPP (Expanded Polypropylene) have high insulation values and are used extensively in the packaging, refrigeration and building industries.

These materials are mostly moulded for application and production but can also be machined for prototyping and proof of concept.

Recently Bray Plastics were asked to machine a prototype surfboard core using one of their large capacity CNC routers.

We produced a profiled vacuum table in EPP to enable an accurate machining fixture for the second of the board profiles, having machined the first profile on a standard flat vacuum table.

If that sounds confusing, please take a moment to view the video!
https://www.youtube.com/watch?v=5M01ufaVidM

We provide plastic engineering solutions and advice to all industry types including Automotive, Industrial, Medical and Pharmaceutical, Refrigeration and Catering and Ministry of Defence, so whatever you are looking for, please contact us on 01525 219100.
Photo
Add a comment...

Post has attachment
Product redesign for commercial success

Reviewing and/or re-designing your own product is a difficult task, particularly if you have been closely associated with it.

This was the dilemma ProEconomy faced with their ‘Orca’ water treatment station for Legionella control. Orca was a successful and proven system that required updating for engineering, servicing and customer interface.

ProEconomy approached Bray Plastics for advice and options. After we reviewed the requirement, Bray re-engineered the layout and mounting base, added graphics and generally repackaged an already very effective product.

Using our skills in design, plastic machining, fabrication, vacuum forming and assembly we worked closely with ProEconomy staff to quickly achieve a highly commercial product.

Our client was delighted with the final results and has already re-ordered due to favourable customer response.
https://youtu.be/8Cm0DQ8LmsE
Add a comment...

Post has attachment
What is Thermoforming?

Thermoforming is a term used in plastic engineering to cover a variety of processes. All thermoforming involves heating a plastic sheet to its pliable plastic state. Different plastics require a different temperature and length of heating to reach their malleable state.

Once heated the plastic is placed over an existing mould. Moulds can be made of a variety of different materials including MDF, aluminium, epoxy and foam. Then the plastic sheet is pushed or sucked around the mould to form the new shape. This can be done via air pressure (pressure forming) or vacuum (vacuum forming).

Once the plastic cools it becomes solid again and will hold its new shape. It can then be removed from the mould and a variety of finishes can be applied if necessary. These can include different coatings, screen printing, lamination etc.

Add a comment...

Post has attachment
The difference between vacuum forming & thermoforming.

The terms vacuum forming and thermoforming are usually interchangeable, however thermoforming is a more generic term and refers to a range of fabrication processing where a plastic sheet has been heated to its ‘plastic’ malleable state and then shaped using a mould. The forming (pushing the plastic on to the mould) can be via vacuum or air pressure.

A male or female mould can be used. A male mould is the same shape as the object being formed, and the plastic sheet would be placed over it. A female mould forms the exterior of a shape and is the reverse of the object being made.

Once the plastic has cooled it will be permanently in the shape of the mould unless it is heated to a high temperature again.

Thermoforming can include pressure forming, vacuum forming and twin sheet forming.

Vacuum forming is a type of thermoforming. The plastic is heated to it’s plastic, soft, malleable shape and placed over a mould. Then the air is vacuumed out, sucking the plastic onto the mould. Then the plastic is cooled back to a solid state, forming the new shape. The air can then be blown back to free the plastic from its mould.

Here are some examples of vacuum forming.
PhotoPhotoPhotoPhotoPhoto
2/12/18
6 Photos - View album
Add a comment...

Post has attachment
The Vacuum Forming Process

The mould is placed on the machine bed and held in place. The plastic sheet is clamped firmly in place. The clamps need to handle the thickest material (between 6-10mm). Some plastic sheets have undergone screen printing prior to being formed. In these cases the screen print file is created from the end product and worked backwards to form a flat print.

The plastic sheet is heated so the sheet reaches a uniform temperature throughout its thickness. Different plastics have different temperatures they are required to reach before they become malleable.

The heaters are usually infra-red elements set in an aluminium reflector plate.

Once the plastic has reached it’s ‘plastic’ state or forming temperature the mould is pushed up into the sheet. The vacuum is applied to draw the air out between the sheet and the mould.

Only once the plastic has been formed around the mould is it allowed to cool. Once cooled the plastic returns to its solid state. If the mould is released before the plastic is fully cooled then the plastic may become deformed and the component will be spoiled.

Once the formed part has been cooled and removed from the machine it needs to be cut from the excess material and then have a finishing process if necessary. This can include cutting holes or slots, printing, coating, strengthening, assembly or reinforcing.

http://www.brayplastics.co.uk/what-is-vacuum-forming/

Vacuum forming originated in the 1930s and is still a hugely relevant engineering process due to its low cost, efficiency and speed of replication, and the cost of creating the tooling.

New thermo-formable plastics and composites are being developed to be more environmentally friendly and more efficient to process.

Vacuum forming can be used in conjunction with a number of other processes including injection moulding, 3D printing and casting to form a number of components that will all be assembled together to form a final product.

What is Vacuum Forming?
What is Vacuum Forming?
brayplastics.co.uk
Add a comment...

Post has attachment
What is Vacuum Forming?

Vacuum forming is a type of thermoforming, where a plastic sheet is heated until it becomes mouldable, when it is then stretched over a mould and the force of the vacuum pulls the plastic against the mould.

Vacuum forming can be used for a number of purposes. Bray Plastics often use vacuum forming to create very large scale components. The largest to date was the size of a bath tub. It is also possible to lay a number of moulds on the same bed and create many smaller components at the same time. Depending on size up to 80 components could be created from one plastic sheet.

Before any vacuum forming can take place a mould is required. This can be made from wood, aluminium, foam, resin. When creating the mould the plastic engineer must consider the shrinkage of the plastic when it is heated and cooled. Most plastics shrink by different amounts so the mould must be made larger by the same percentage to allow for the shrinkage. ABS shrinks by 0.8% so the internal dimensions of the mould must be 0.8% larger to allow for the shrinkage whilst cooling.

https://youtu.be/abS_kAC4V0Q
Add a comment...

Post has attachment
Materials Used in Vacuum Forming

Materials used in vacuum forming are usually thermoplastics. Almost all thermoplastics can be supplied in sheets and so can be vacuum formed. It’s also suitable for transparent materials such as acrylic, making it ideal in the aeronautical industry creating cabin windows and cockpit canopies.
Common plastics used in Vacuum Forming

HIPS – High Impact Polystyrene Sheeting
ABS – Acrylonitrile butadiene Styrene
PMMA – Acrylic
PE – Polyethylene
PETG – Polyester Copolymer
PS – Polystyrene
PC – Polycarbonate
PVC – Polyvinyl Choride
PP – Polypropylene

If you aren’t sure which plastic is the best type to use for your application then Bray Plastics can help. Our expertise means that we can advise you of the best material for the end product and for the mould to ensure a cost effective, quality production.

Recycled plastic can be used which is an environmentally friendly option. It’s usually quite adequate for most applications and cheaper than polycarbonate or carbon fibre.

Some plastics don’t form very well and these should be avoided. Bray Plastics can advise you which these are.

There are also a type of plastic called thermo-setting plastics. These once heated and solidified again can’t then be remelted. Bakelite is an example of this – it’s a liquid resin, can be heated, but then can’t be remelted and reformed once set.
Photo
Add a comment...

Post has attachment
Vacuum forming can be a cost effective way of solving head scratching issues for product designers.

The two samples in the video show a simple membrane panel for a control interface and a cover for an automotive application.

Couple this with Bray Plastics fabrication, 3D printing and machining expertise and your design problem may not be so big.

https://youtu.be/lKpCV8JyM7Q

If we can help you with any of your plastic manufacturing questions or requirements please contact us on 01525 219100.
Add a comment...

Post has attachment
How to interface with bespoke fittings

Most injection moulded PVC fittings interface well with other PVC fittings.

A problem arises when these fittings are expected to interface with custom or bespoke components.

Bray Plastics design and machining facilities help us to find solutions for our customers as illustrated in the video. https://www.youtube.com/watch?v=6VKW1o79dx0

his shows the boring and threading required to facilitate the connection of a stainless steel flow meter to a PVC pipe fitting for an industrial water supply application.

Can Bray Plastics help you? Please contact us on 01525 219100
Photo
Add a comment...
Wait while more posts are being loaded