Profile cover photo
Profile photo
Boatlifts, Jetties & Marinas of WA
19 followers -
Boatlifts, Jetties, Marinas, Drydock, Pontoon, jetski, floating, EZ Dock , Jetdock, ACR dock, dock, fenders, lifting, boat, drive on, outboard, boat, yacht, dockpro, seapen, airberth, custom float,
Boatlifts, Jetties, Marinas, Drydock, Pontoon, jetski, floating, EZ Dock , Jetdock, ACR dock, dock, fenders, lifting, boat, drive on, outboard, boat, yacht, dockpro, seapen, airberth, custom float,

19 followers
About
Posts

Post has attachment
This nice 6m brig now sit clear of the water maintaining value without the horrible looking anti. the owner is wrapped with the EZ BoatPort. The dock is 3m wide and enable a comfortable walk down both side to fit covers and maintenance. This dock has a full roller top for easy drive on and drive off operation.
See our range of solutions to float you boat at http://www.boatliftsandjetties.com.au/products/index/drive-on-docks-boat-lifts we customise every dock to suit your individual needs.
Photo
Photo
6m Brig on EZ BoatPort
2 Photos - View album
Add a comment...

Post has attachment
Boatlifts, Jetties & Marinas have just installed a 10m by 4.5m floating party platform for a birthday celebration. The 6m x 3m marque is bolted direct to the dock surface and no guide ropes are required. The 7 piece band will pump their tunes towards the 3 storey residence out of the sun. We specialize in floating products to suit your needs.
PhotoPhotoPhoto
Party Hire pontoon
3 Photos - View album
Add a comment...

Post has attachment
New 19ft universal JetDock installed today. The owner is new to boating and demonstrates just how easy it is to dock a sterndrive onto a floating boat dock. The JetDock is the only product to come with a lifetime limited warranty. The warranty provides peace of mind and comfort for your investment. The modular system allows for further upgrades in the event you out grow your current ride or win lotto to purchase a large boat.
PhotoPhotoVideo
17/11/2017
3 Photos - View album
Add a comment...

Post has attachment
Another hire work platform packaged and ready to go. This hire unit is being transported to Carnarvon for a Sea Wall Maintenance.

The larger work platform is 6m long and has a 3m split level. The working height on the top level will be approximately 800mm above the waterline. Both working platforms have load rating of 350kg per square metre. A galvanised steel handrail is fitted to 3 sides of both work platforms via custom made handrail holders fitted to the perimeter of the work platform. We have fitted many tie off cleat to secure the dock into position whilst working. See this link for other work platform we have customised for projects within Australia.
PhotoPhotoPhoto
11/08/2017
3 Photos - View album
Add a comment...

Post has attachment
Boatlifts, Jetties and Marinas has just completed a JetDock upgrade to suit a new 9m Powercat for the Fremantle Sea Rescue. The new Shockwave Powercat hull is state of art and weighs in excess of 5500kgs complete with 2 300hp outboards.
PhotoPhotoPhoto
Fremantle Sea Rescue
3 Photos - View album
Add a comment...

Post has attachment
Boatlifts, Jetties and Marians of WA install a 3000kg single post mechanical lifter in Wannanup. The in-house design lifter is a local built all heavy duty galvanised steel design. All the nylon rollers are external ensuring and growth crushed during operation will fall clear and will not cause jamming during operation. The lifter uses a single phase 10amp motor and a alloy constructed gearbox providing long life expectancy and low maintenance in the toughest marine environments. The lifter is also fitted with a large anode to protect the lifter from corrosion in the salt water. Inner guides are standard and to protect the vessel contacting the steel structure during docking and they also allow for the new owner a fixed marker for the correct balance and docking position when the lifter is low in the water.
Photo
Photo
01/05/2017
2 Photos - View album
Add a comment...

Post has attachment
Boatlifts, Jetties and Marinas of WA now supply Canal access steps to your jetty. These steps are locally designed and made to order. They are fabricated from marine grade aluminium and hinge out of the water to prevent barnacle growth cutting your feet. Standard installation comes with one handrail and 900mm wide and 250mm foot steps, quality stainless steel hardware and spliced ropes for easy retrieval and tie off for storage.
Photo
Photo
01/05/2017
2 Photos - View album
Add a comment...

Post has attachment
100km/hr Speed boat now resides on a EZ Boatport airlift system.
Boatlifts, Jetties & Marinas of WA travelled to Pelican Point Bunbury to install this solar powered EZ BoatPort system to dry dock a 100km/hr speed boat. This older bullet hull boat has been with the owner for many years and keeping it in new condition with simple operation were the major factors in the decision to purchase the EZ BoatPort system.The EZ Dock BoatPort solar system is a 12v air pump combination delivering 2250kg of buoyancy with the turn of a valve and a flick of a switch. This boat is high enough out of the water to not even require engine trimming. The full roller top and bunk system keep the boat straight when docking and provide very little friction.
PhotoPhotoPhotoPhotoPhoto
01/05/2017
5 Photos - View album
Add a comment...

Post has attachment
A major residential building site in Perth CBD has chosen Boatlifts, Jetties & Marinas of WA to supply 150 square metres of floating work and access platforms at their site. The platforms were pre-assembled and delivered to the Swan River in April for a 4 month period. The bright clean grey ACR Dock provides a safe non slip surface for walking in all conditions. Our in-house design team have designed and incorporated a handrail holder that utilises standard scaffold tubing enabling installation of fall prevention railing improving the safe workplace for the employees. ACR Dock tie off cleats are robust and allow for easy tie-off, maintaining the platforms in best position in all tides.
PhotoPhotoPhotoPhotoPhoto
01/05/2017
6 Photos - View album
Add a comment...

Post has attachment
Owner has had this solid beauty from new. The hull is original paint and in pristine condition. Boatlifts, Jetties & Marinas of WA team installed a new ACR Dock to keep the hull 100% dry and clean for many years to come. Capturing the best of the water front the retired owner decided to have the drive on dock pivot from the port bow and keeps the dock clear of the passing tourist traffic if required.
Photo
Add a comment...
Wait while more posts are being loaded